Intake manifold question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 12-16-2002, 03:20 AM

If I decide to use a q-jet on my new engine, I am thinking about using this intake manifold (GMPP cast iron high rise). What I am wondering is can you mount the coil for the divorced choke on it?

It looks like it, but I am not really sure.

JimKshortstep4x4 · 12-16-2002, 08:11 AM

If you have the right style, it will bolt up to the manifold. The style you need has an aluminum base and the coil is attached on top of the base. Heat transfer is through the aluminum to warm the coil.

Jim

12-16-2002, 03:20 AM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Intake manifold question If I decide to use a q-jet on my new engine, I am thinking about using this intake manifold (GMPP cast iron high rise). What I am wondering is can you mount the coil for the divorced choke on it? It looks like it, but I am not really sure. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-16-2002, 08:11 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	If you have the right style, it will bolt up to the manifold. The style you need has an aluminum base and the coil is attached on top of the base. Heat transfer is through the aluminum to warm the coil. Jim



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.