need O.E pictures of harness routing on 72 BB 402

[72 longhorn BB]

Hey there, do any of you have pictures of the following?

- Negative battery cable routing to block
- Positive battery cable routing to starter
- Location of horns
- harness routing across top of engine (rh and lh sides)

If you can supply any or all of these pictures it would be greatly appreciated.

I had my rig apart for years and forgot exactly where everyting went.

Thanks ahead of time and keep the pictures coming. They all tell something.

[Bob Moore]

I can answer the horn question. Single horn mounts on the core support in a weld nut on the left side of radiator and down low. The 2nd horn mounts further out on the core support in a weld nut near the headlight. Thgese are both on the engine side of the core.

[72 longhorn BB]

Thanks, I found the mounting point by the headlight, but not the one by the rad support.

Also, the cable routing to the starter and block are important.

Has anyone got a few pictures to spare?

[72 longhorn BB]

Hello Bob, a while back you answered me about locations of the horns on a two horn setup. You mentioned the driver side rad support for the second one. I am not sure if you ever sent pictures, but based on the location you described, there is no provision for that on my rad support, yet I KNOW I had two cus the wiring harness is wired for it. could I ask youthe favor of snaping a picture of your two horn setup and shoot it to me at chuck_rummler@wideopenwest.com

thanks ahead of time