What did you get done? 07/15 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**N2TRUX** · 07-15-2007, 09:39 PM

Monday I finalized the deal on my wife's new daily driver. She was considering an 08 Infiniti QX56 but they Infiniti dealers wouldn't deal. GM was running a rebate program, so I went for their deal. She bought a black 07 GMC Denali XL. It's got a 380 hp 6.2 with every option but the engine block heater.

I was on call again this weekend. I'm taking the family to Corpus Christi next weekend so I let me service tech off. I had planned to pick up some parts for my 82 Blazer project, but the rain came and ended that plan.

Today I took my daughter out driving. She just got her learners permit and was anxious to get some wheel time in. She managed to keep all the chrome on my wheels despite covering it with mud from the construction.

The highlight of my day was cleaning out two clogged drains in my daughters bathroom. I just LOVE plumbing work.

What did you get done?

bigblock73 · 07-15-2007, 09:50 PM

Nothing truck related. I did start putting in our new oak trim (baseboards), and had a guy come over and hang 5 of our 7 new solid core oak doors. House renovations never seem to end.

boatpuller · 07-15-2007, 10:43 PM

i removed my old rear bumper.in anticipation of the new one due on wednesday.ummmmmmmmmmmm, newtriple plated chrome.

SSC's76 · 07-15-2007, 11:09 PM

I managed to go on a nice little cruise up the hill with my brother it was his first real ride on his bike that lasted for more them 5 minutes. He dident do too bad. We rode up to the Royal Gourge and went up skyline drive and back nice little ride. Got my fool self all sunburnt.

Finished up the 76 351W project good enough for now. This fNord has been driving me crazy but it made it back to Jasons house without catching on fire and I got a nice little check for my trouble. My neighbors were kinda getting tired of hearing open headers on a 400hp engine at all hours. I need to replace the alternator since it was kinda charging at 22 volts and install A/C but I need my garage to fix my van. I kinda miss my shop working from my garage sucks!

Went over another friends house and picked up my next project bike 78 Gold Wing 1100. He owed me some cash and is about to move down to socal so we fanagled some things to kinda pay his debt. Real clean bike but I'll stick to my Harley.

82c10 · 07-15-2007, 11:14 PM

sold the ranger

talked to a guy about buying the motor out of my 82 c10, talked to a guy interested in my truck as a roller, i am going to go look at another mustang tomorrow

Grande Rojo · 07-15-2007, 11:28 PM

got my 86 done
new motor,trans,driveline,exhaust,floor,lowered,tires/wheels
(yes, a 315/35/20 will fit in the rear with no mods)
put about 75 miles on it so far...no problems
now all it needs is paint

SCOTI · 07-15-2007, 11:48 PM

Quote:

Originally Posted by Grande Rojo

....yes, a 315/35/20 will fit in the rear with no mods

How wide of a wheel?

SCOTI · 07-15-2007, 11:53 PM

I spent the weekend @ the GoodGuys Columbus show w/my friends from Stoked Out. It was fun..... it was tiring.

I feel bad for them (I had time constraints & flew.... they're driving back to TX).

**AspecialZ** · 07-16-2007, 01:11 AM

Ditto, spent all weekend in Columbus, seen a couple or later model trucks which snuck in, but what a show, I think we caught 8,200 on one of the entry numbers. Also partook in the flashlight drags over at National Trails Raceway, not a bad turnout. I bought a Kwik-Lift after looking it over for months, show special. www.kwiklift.com Also bought some flush mount LEDs for the rollpan on the stepper, I cut the holes in last weekend. Should look great once I get them in.

Russell · 07-16-2007, 01:16 AM

I spent literally the whole week slaving away out in the shop, I'll post pictures of what I've been up to next week when I've some slightly more visual results

knightlife · 07-16-2007, 01:19 AM

installed my new driver side window motor.

installed the solenoids for my shaved door kit.

drank till I was sober

68GMC454 · 07-16-2007, 02:45 AM

i spent the day at the ol lady's parents huse..when i got home my buddy called and i went up to his house..hes gonna give me 2 complete front doors for the dually with elctric windowss and door locks...also giving me a floor pan out of the same parts truck...changed the filters in my swamp cooler...called it a day...
i spent satureday hauling the old cab over campers i had to the guy i got the dually from..took forever,,made 2 round trips in 104 degree temps with no a/c...stick a fork in me im done..
billy

Prong · 07-16-2007, 04:56 AM

Saturday: Rewired trailer lights on the 79LB to be compatible with the ATV trailer.
Sunday: Replaced wiper motor in above truck. Proceeded to fix vacuum line for A/C controls in the 79SB. Of course it had to be the hardest actuator to get to--don't wanna mess with that again. Washed/detailed the SB, raked some leaves, threw a Ribeye on the grill and called it a day...

Grande Rojo · 07-16-2007, 06:15 AM

Quote:

Originally Posted by SCOTI

How wide of a wheel?

20x12 w/6"bs
They were the wheels I was going to use on my stepside but you know how things change.

79Silv4x4 · 07-16-2007, 10:58 AM

Quote:

Originally Posted by Grande Rojo

20x12 w/6"bs
They were the wheels I was going to use on my stepside but you know how things change.

Looks sweet!

benoit454 · 07-16-2007, 11:31 AM

How much did you lower it?

**Captkaos** · 07-16-2007, 02:23 PM

Friday I got some parts from the local salvage yard. a-pillars pieces from a Burb and the ECM tray. Plan to use the ECM tray for my 78 Jimmy's TPI conversion that I just started back on.
Saturday I started pulling the rest of the fuel lines off the Jimmy along with the pump and carb
Sunday I replaced the O2 sensor on the burb, changed the oil for the first time since I got it. While I was under there I discovered my shifting problem, the transmission plug was dangling down so I reconnected it, and I also found that the fuel sending line was crimped behind the transmission crossmember. I was hoping that would fix the sender problem, but it didn't.

69BBsuburban · 07-16-2007, 02:28 PM

I really didn't GET anything done.....
But I brought home a '62 GMC truck cab....I'm going to chop off the roof, cut 8" off along the bottom, narrow the entire cab 18" down the center, and modify the firewall with a '60/'61 hood.
It's going to be a 60's style showrod.........

**N2TRUX** · 07-16-2007, 02:30 PM

Quote:

Originally Posted by Grande Rojo

20x12 w/6"bs
They were the wheels I was going to use on my stepside but you know how things change.

More pics and details please

EJC78 · 07-17-2007, 12:49 AM

Here are some pics of what I got done this week end.
http://67-72chevytrucks.com/vboard/s...d.php?t=248394

Grande Rojo · 07-18-2007, 01:08 AM

Quote:

Originally Posted by N2TRUX

More pics and details please

Well, you will just have to wait untill this weekend.

07-15-2007, 09:39 PM	#1
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	What did you get done? 07/15 Monday I finalized the deal on my wife's new daily driver. She was considering an 08 Infiniti QX56 but they Infiniti dealers wouldn't deal. GM was running a rebate program, so I went for their deal. She bought a black 07 GMC Denali XL. It's got a 380 hp 6.2 with every option but the engine block heater. I was on call again this weekend. I'm taking the family to Corpus Christi next weekend so I let me service tech off. I had planned to pick up some parts for my 82 Blazer project, but the rain came and ended that plan. Today I took my daughter out driving. She just got her learners permit and was anxious to get some wheel time in. She managed to keep all the chrome on my wheels despite covering it with mud from the construction. The highlight of my day was cleaning out two clogged drains in my daughters bathroom. I just LOVE plumbing work. What did you get done? Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 07-15-2007 at 09:48 PM.

07-15-2007, 09:50 PM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: What did you get done? 07/15 Nothing truck related. I did start putting in our new oak trim (baseboards), and had a guy come over and hang 5 of our 7 new solid core oak doors. House renovations never seem to end. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

07-15-2007, 10:43 PM	#3
boatpuller Registered User Join Date: Sep 2005 Location: Sun City West, Az Posts: 3,822	Re: What did you get done? 07/15 i removed my old rear bumper.in anticipation of the new one due on wednesday.ummmmmmmmmmmm, newtriple plated chrome. __________________ " Never look up a dead dogs butt."

07-15-2007, 11:09 PM	#4
SSC's76 No No Join Date: Jun 2005 Location: Pueblo Colorado Posts: 1,781	Re: What did you get done? 07/15 I managed to go on a nice little cruise up the hill with my brother it was his first real ride on his bike that lasted for more them 5 minutes. He dident do too bad. We rode up to the Royal Gourge and went up skyline drive and back nice little ride. Got my fool self all sunburnt. Finished up the 76 351W project good enough for now. This fNord has been driving me crazy but it made it back to Jasons house without catching on fire and I got a nice little check for my trouble. My neighbors were kinda getting tired of hearing open headers on a 400hp engine at all hours. I need to replace the alternator since it was kinda charging at 22 volts and install A/C but I need my garage to fix my van. I kinda miss my shop working from my garage sucks! Went over another friends house and picked up my next project bike 78 Gold Wing 1100. He owed me some cash and is about to move down to socal so we fanagled some things to kinda pay his debt. Real clean bike but I'll stick to my Harley. __________________ 1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler

07-15-2007, 11:14 PM	#5
82c10 needin' money Join Date: May 2005 Location: Chickasha, Oklahoma Posts: 1,106	Re: What did you get done? 07/15 sold the ranger talked to a guy about buying the motor out of my 82 c10, talked to a guy interested in my truck as a roller, i am going to go look at another mustang tomorrow

07-15-2007, 11:28 PM	#6
Grande Rojo paper or plastic? Join Date: Nov 2002 Location: SW Missouri Posts: 671	Re: What did you get done? 07/15 got my 86 done new motor,trans,driveline,exhaust,floor,lowered,tires/wheels (yes, a 315/35/20 will fit in the rear with no mods) put about 75 miles on it so far...no problems now all it needs is paint __________________ 1967 Chevy SWB 250 http://67-72chevytrucks.com/vboard/s...d.php?t=442157 1977 Chevy SWB 454 No More 454 getting 5.3 http://67-72chevytrucks.com/vboard/s...d.php?t=310518 1977 Stepside Truck of the month winner http://67-72chevytrucks.com/vboard/s...d.php?t=135524 1965 Chevy C10 454 http://67-72chevytrucks.com/vboard/s...d.php?t=731372 1975 Dodge Power Wagon http://67-72chevytrucks.com/vboard/s...=1#post7871388

07-15-2007, 11:53 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: What did you get done? 07/15 I spent the weekend @ the GoodGuys Columbus show w/my friends from Stoked Out. It was fun..... it was tiring. I feel bad for them (I had time constraints & flew.... they're driving back to TX). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-16-2007, 01:11 AM	#9
AspecialZ Street Rod Restoration Join Date: Jan 2004 Location: Wellsburg, WV Posts: 882	Re: What did you get done? 07/15 Ditto, spent all weekend in Columbus, seen a couple or later model trucks which snuck in, but what a show, I think we caught 8,200 on one of the entry numbers. Also partook in the flashlight drags over at National Trails Raceway, not a bad turnout. I bought a Kwik-Lift after looking it over for months, show special. www.kwiklift.com Also bought some flush mount LEDs for the rollpan on the stepper, I cut the holes in last weekend. Should look great once I get them in. __________________ Follow me on Instagram @ hot_rod_shop

07-16-2007, 01:16 AM	#10
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: What did you get done? 07/15 I spent literally the whole week slaving away out in the shop, I'll post pictures of what I've been up to next week when I've some slightly more visual results __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

07-16-2007, 01:19 AM	#11
knightlife Dark Heart Motorsports Join Date: Apr 2007 Location: 29404 DKFX Posts: 683	Re: What did you get done? 07/15 installed my new driver side window motor. installed the solenoids for my shaved door kit. drank till I was sober __________________ How Deep Can YOU Bleed..? 1985 Chevy Blazer K5- 6.2 N/A, 400 turbo trans CUCV, 12v converted... a new chapter 2005 GMC Sierra Crew Cab 6.0 powwwaa!!! custom jumpseat install w/ captain seats, Hypertech tuner, MSD Blaster Coils, CB and twin antenna's, all electric interior, touch screen in dash. custom center console, with jump seat replacing original console. 1500 HD! Last edited by knightlife; 07-16-2007 at 03:28 AM. Reason: added pics...

07-16-2007, 02:45 AM	#12
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: What did you get done? 07/15 i spent the day at the ol lady's parents huse..when i got home my buddy called and i went up to his house..hes gonna give me 2 complete front doors for the dually with elctric windowss and door locks...also giving me a floor pan out of the same parts truck...changed the filters in my swamp cooler...called it a day... i spent satureday hauling the old cab over campers i had to the guy i got the dually from..took forever,,made 2 round trips in 104 degree temps with no a/c...stick a fork in me im done.. billy __________________ honestly honey,,i have no idea how that truck got here.

07-16-2007, 04:56 AM	#13
Prong Registered User Join Date: May 2007 Location: CO Posts: 475	Re: What did you get done? 07/15 Saturday: Rewired trailer lights on the 79LB to be compatible with the ATV trailer. Sunday: Replaced wiper motor in above truck. Proceeded to fix vacuum line for A/C controls in the 79SB. Of course it had to be the hardest actuator to get to--don't wanna mess with that again. Washed/detailed the SB, raked some leaves, threw a Ribeye on the grill and called it a day...

07-16-2007, 11:31 AM	#16
benoit454 Chris Join Date: Nov 2004 Location: Monaville, WV Posts: 3,737	Re: What did you get done? 07/15 How much did you lower it? __________________ Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454

07-16-2007, 02:23 PM	#17
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: What did you get done? 07/15 Friday I got some parts from the local salvage yard. a-pillars pieces from a Burb and the ECM tray. Plan to use the ECM tray for my 78 Jimmy's TPI conversion that I just started back on. Saturday I started pulling the rest of the fuel lines off the Jimmy along with the pump and carb Sunday I replaced the O2 sensor on the burb, changed the oil for the first time since I got it. While I was under there I discovered my shifting problem, the transmission plug was dangling down so I reconnected it, and I also found that the fuel sending line was crimped behind the transmission crossmember. I was hoping that would fix the sender problem, but it didn't. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

07-16-2007, 02:28 PM	#18
69BBsuburban Right in front of you. Join Date: Jan 2006 Location: Roy, Wa Posts: 584	Re: What did you get done? 07/15 I really didn't GET anything done..... But I brought home a '62 GMC truck cab....I'm going to chop off the roof, cut 8" off along the bottom, narrow the entire cab 18" down the center, and modify the firewall with a '60/'61 hood. It's going to be a 60's style showrod......... __________________ Pinstriping by Josh '78 Chevy Silverado SWB (lowered, 454) '90 Chevy Sport Truck '68 Dodge Charger R/T 1930 Ford Model A



Register or Log In To remove these advertisements.

07-17-2007, 12:49 AM	#20
EJC78 No Life Like Low Life Join Date: Nov 2005 Location: Gilroy,CA Posts: 367	Re: What did you get done? 07/15 Here are some pics of what I got done this week end. http://67-72chevytrucks.com/vboard/s...d.php?t=248394 __________________ Eric 1978 Chevy Scottsdale 1960 Impala ZZ4 1965 Buick Riviera GS 2011 GMC Sierra Denali

Register or Log In To remove these advertisements.