ZR1 wheels on there C10? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

draggin86 · 07-23-2007, 05:09 AM

Anyone have zr1 reps on there c10 i was thinking about doing it i have a buddy that has them on his 3rd gen they drive me wild everytime i see them.. but i dont feel like dropping the cash on billets right now. so if anyone has them post up some pictures!

Thanks
Billy

Jonboy · 07-23-2007, 09:54 AM

If you do decide to run them, you will need to get some adapters also. The ZR1's are the smaller bolt pattern (5 on 4.75, IIRC), and the truck is the larger bolt pattern (5 on 5, I think).

1LoC10 · 07-23-2007, 10:00 AM

not your year, but an idea

Jim85IROC · 07-23-2007, 10:07 AM

You would need the proper spacers for them, as you would with any FWD offset wheel, but since you'd need adapters anyway, you can just buy the spacers with the proper lug pattern.

draggin86 · 07-23-2007, 04:53 PM

these were the ones i had in mind.. maybe i was wrong what model wheel they are...

i also think the Zo6 wheels would look awesome! they arent to expensive either.

i have ran wheels adapters before i never had a problem.

Jim85IROC · 07-24-2007, 09:08 AM

Those top wheels are usually referred to as "Grand Sport" wheels. They're the same style as the ZR1s, but have the black painted spokes. When dealing with the real wheels and not reproductions, the Grand Sport wheels are also a different width and offset than the real ZR1 wheels, due to the real ZR1 rear wheels being very wide to fill up the wider ZR1 wheel wells. This really isn't an issue with repops though, because they're usually available in all kinds of widths.

draggin86 · 07-24-2007, 04:45 PM

thats what i was planning on going with was reps! doing a 17x8.5 and like a 18x11 or something if i could get the fronts in 18's i would be happy

07-23-2007, 05:09 AM	#1
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	ZR1 wheels on there C10? Anyone have zr1 reps on there c10 i was thinking about doing it i have a buddy that has them on his 3rd gen they drive me wild everytime i see them.. but i dont feel like dropping the cash on billets right now. so if anyone has them post up some pictures! Thanks Billy

07-23-2007, 09:54 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: ZR1 wheels on there C10? If you do decide to run them, you will need to get some adapters also. The ZR1's are the smaller bolt pattern (5 on 4.75, IIRC), and the truck is the larger bolt pattern (5 on 5, I think).

07-23-2007, 10:00 AM	#3
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: ZR1 wheels on there C10? not your year, but an idea __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all << Last edited by 1LoC10; 07-23-2007 at 10:08 AM.

07-23-2007, 10:07 AM	#4
Jim85IROC Registered User Join Date: Dec 2004 Location: Readsboro, VT Posts: 502	Re: ZR1 wheels on there C10? You would need the proper spacers for them, as you would with any FWD offset wheel, but since you'd need adapters anyway, you can just buy the spacers with the proper lug pattern. __________________ 1987 GMC Sierra Classic 3500 454 TH400 My Sounddomain Page

07-23-2007, 04:53 PM	#5
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: ZR1 wheels on there C10? these were the ones i had in mind.. maybe i was wrong what model wheel they are... i also think the Zo6 wheels would look awesome! they arent to expensive either. i have ran wheels adapters before i never had a problem. Last edited by draggin86; 07-23-2007 at 04:53 PM.

07-24-2007, 09:08 AM	#6
Jim85IROC Registered User Join Date: Dec 2004 Location: Readsboro, VT Posts: 502	Re: ZR1 wheels on there C10? Those top wheels are usually referred to as "Grand Sport" wheels. They're the same style as the ZR1s, but have the black painted spokes. When dealing with the real wheels and not reproductions, the Grand Sport wheels are also a different width and offset than the real ZR1 wheels, due to the real ZR1 rear wheels being very wide to fill up the wider ZR1 wheel wells. This really isn't an issue with repops though, because they're usually available in all kinds of widths. __________________ 1987 GMC Sierra Classic 3500 454 TH400 My Sounddomain Page

07-24-2007, 04:45 PM	#7
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: ZR1 wheels on there C10? thats what i was planning on going with was reps! doing a 17x8.5 and like a 18x11 or something if i could get the fronts in 18's i would be happy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.