Clearing out alot of small truck parts... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**John Fabris** · 07-21-2007, 03:13 PM

Hi all,

I am selling off a lot of my extra truck parts, things like front bumper brackets, dash knobs, wipers, axle bumpers, big block carb spacer, etc for $1.00 each plus shipping. These are all on eBay now. There are 57 auctions. Please take a look on ebay for "by seller jmfabris"

I have this posted in the everwhere but here forum but it is not getting much attention and there are a lot of good thing for cheap that I don't want guys to miss out on....

UP GRADE · 07-22-2007, 03:01 PM

Is There Any Pitting On The Ext Door Handle

greenhorn male · 07-22-2007, 03:30 PM

Hi John, Are you doing the ebay thing alone. In the next week you will be a very busy man. Good luck on your auctions.

**DREW67** · 07-22-2007, 04:12 PM

John do you have a templete for A/C Dash?

**John Fabris** · 07-24-2007, 01:43 PM

Up Grade, there is no pitting on these handles, they do have scratches but not deep enough to ruin the chrome. These are good for a nice driver.

Hi Green, Ya, I may be a little busy wed night with the ones that pay right away.... I like your grab bag sales, I may go that route with my next batch of small parts....

Drew, I do have paper templates of where to cut for three vents. I can give you a copy of them... PM me if you want them....

Anyway, TTT as there is one day left and a lot of the items are at $1.00 with no bids and I will combine items for shipping!!

DennyB · 07-24-2007, 04:17 PM

Great John,
I will be bidding on 6 or 7 of your items.

Denny

**John Fabris** · 07-25-2007, 09:49 AM

Thanks Denny,

All of this ends today and there are stil several that are $1.00 with no Bids so get in while you can!!!

BAGGERSOCAL · 07-25-2007, 01:00 PM

will try and bid on a few parts also

**John Fabris** · 07-25-2007, 01:16 PM

Thanks Guys, I am heading north to Oregon for a week starting Thurday, and when I get back I will pull out more stuff to sell, pretty much the same format that GreenHorn is doing, grab bags.

07-21-2007, 03:13 PM	#1
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Clearing out alot of small truck parts... Hi all, I am selling off a lot of my extra truck parts, things like front bumper brackets, dash knobs, wipers, axle bumpers, big block carb spacer, etc for $1.00 each plus shipping. These are all on eBay now. There are 57 auctions. Please take a look on ebay for "by seller jmfabris" I have this posted in the everwhere but here forum but it is not getting much attention and there are a lot of good thing for cheap that I don't want guys to miss out on.... __________________ John Fabris 67 C10 SWB

07-22-2007, 03:01 PM	#2
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Clearing out alot of small truck parts... Is There Any Pitting On The Ext Door Handle

07-22-2007, 03:30 PM	#3
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: Clearing out alot of small truck parts... Hi John, Are you doing the ebay thing alone. In the next week you will be a very busy man. Good luck on your auctions. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

07-22-2007, 04:12 PM	#4
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: Clearing out alot of small truck parts... John do you have a templete for A/C Dash? __________________ DREW67

07-24-2007, 01:43 PM	#5
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Clearing out alot of small truck parts... Up Grade, there is no pitting on these handles, they do have scratches but not deep enough to ruin the chrome. These are good for a nice driver. Hi Green, Ya, I may be a little busy wed night with the ones that pay right away.... I like your grab bag sales, I may go that route with my next batch of small parts.... Drew, I do have paper templates of where to cut for three vents. I can give you a copy of them... PM me if you want them.... Anyway, TTT as there is one day left and a lot of the items are at $1.00 with no bids and I will combine items for shipping!! __________________ John Fabris 67 C10 SWB

07-24-2007, 04:17 PM	#6
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: Clearing out alot of small truck parts... Great John, I will be bidding on 6 or 7 of your items. Denny __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

07-25-2007, 09:49 AM	#7
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Clearing out alot of small truck parts... Thanks Denny, All of this ends today and there are stil several that are $1.00 with no Bids so get in while you can!!! __________________ John Fabris 67 C10 SWB

07-25-2007, 01:00 PM	#8
BAGGERSOCAL Active Member Join Date: May 2007 Location: SO CAL Posts: 226	Re: Clearing out alot of small truck parts... will try and bid on a few parts also

07-25-2007, 01:16 PM	#9
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Clearing out alot of small truck parts... Thanks Guys, I am heading north to Oregon for a week starting Thurday, and when I get back I will pull out more stuff to sell, pretty much the same format that GreenHorn is doing, grab bags. __________________ John Fabris 67 C10 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.