![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
changing from 67 to 72 spindle
when doing this do i need the lower and upper ball joints and tie end rods for the 72 spindle.
Last edited by UP GRADE; 07-25-2007 at 10:31 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jul 2007
Location: hooper ut
Posts: 77
|
![]()
as long as you have a haf ton to haf ton youll be sweet
![]() ![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jun 2007
Location: peaster,tx
Posts: 59
|
Re: changing from 67 to 72 spindle
u need to get the upper and lower ball joints replace if nessceary but u need to replace seals and bearings if needed also regrease and repak bearings this dosent take long iv already done it ALSO REPLACE brake lines if their rotted
|
![]() |
![]() |
![]() |
#4 |
Dave's not here, man
Join Date: Jun 2004
Location: Winder, Georgia
Posts: 2,000
|
Re: changing from 67 to 72 spindle
If you used the inner/outer tie rod ends you'll also need the centerlink. You can use the outer tie rod ends, but you need a sleeve adapter to make them work with the 67 inners.
__________________
- 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250 |
![]() |
![]() |
![]() |
#5 |
one set closer
Join Date: Jul 2003
Location: Memphis TN.
Posts: 722
|
Re: changing from 67 to 72 spindle
dave2953 If you used the inner/outer tie rod ends you'll also need the centerlink. You can use the outer tie rod ends, but you need a sleeve adapter to make them work with the 67 inners.
where can i get a sleeve adapter. Last edited by UP GRADE; 07-30-2007 at 03:06 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|