a few questions........

[hewlett2002000]

ive been posting my questions in separate posts so im just gonna ask them all here. here it goes...

what is a good replacement for the stock accelerator setup? i would like a cable set up.

i am changing fro my Saginaw 4spd to a th350. will a powerglide crossmember and yoke work on the th350? if the glide crossmember will work can i bolt it where it would go stock on my truck or does it need to be in a different location?

how hard would it be to put the e-brake in the floor? (just an idea)

is there any 6 lug rotors for my disc brake setup in the front?

when i change to power brakes will the rod on the brake pedal be too long or short to go in the booster? what if i just use a master cylinder from a disc/drum car or truck?

thats all i can think of right now. i appreciate any help you can give.
thanks,
John

[David Flores]

For the accelerator setup and floor ebrake setup, check out Lokar Performance.
http://www.lokar.com/

[layinrocker65]

just about any company that sells disc brakes for are trucks, have rotors in 6 lug. There usually more that the 5 lug though.

[rodnok1]

I put a acc pedal setup from a camaro in, there are several threads on here about cable swaps/even a no weld swap.
You may have to change location in brake pedal, the stock location doesn't give enough throw. You will prob need adj rod also.
You prob can find 6 lug rotors/what it may take some checking/you need to figure out what bearings you now have and see what 6 lug rotors call for same bearings.
check out the link to my homepage(panel progress pics), it may help you out with other things.

[Chevy Fleetside]

Originally Posted by hewlett2002000

ive been posting my questions in separate posts so im just gonna ask them all here. here it goes...


i am changing fro my Saginaw 4spd to a th350. will a powerglide crossmember and yoke work on the th350? if the glide crossmember will work can i bolt it where it would go stock on my truck or does it need to be in a different location?

thanks,
John

I have a powerglide crossmember holding in my 700r4 with my TH350 tranny mount. So in other words. Yes the powerglide crossmemeber will work with the TH350 tranny...

[mbgmike]

Originally Posted by David Flores

For the accelerator setup and floor ebrake setup, check out Lokar Performance.
http://www.lokar.com/

Thats what I used in My 65. We are dealers for Lokar.

Mike