heater core question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68w/sbc406 · 08-07-2007, 03:36 PM

so i have changed my fan in the past so i know you have to pull the hood hindge to get that out, but do you have to pull the inner fender to get the heater core box off to get at the heater core? all tips and suggestions welcome.
68 chevy with no A/C
thanks for any info
Ben

rophle1 · 08-07-2007, 03:54 PM

I had to drop the inner fender to get the bottom screw out. I didn't put the screw back in so that I won't have to drop the fender again.

Yeller68 · 08-07-2007, 03:58 PM

Sure makes it a lot easier. I didn't have to totally remove the inner fender, just take out several bolts on the back side, and pry it down just enough to get heater box out. And I'm same setup as you 68 w/o AC.

Longhorn Man · 08-07-2007, 04:31 PM

There's a FAQ with a step by step for this.

68w/sbc406 · 08-07-2007, 05:58 PM

sorry, didnt have time to search when i posted this.
http://67-72chevytrucks.com/vboard/s...ad.php?t=69812
pretty much what i thought just was hopeing there was an easier way

08-07-2007, 03:36 PM	#1
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	heater core question so i have changed my fan in the past so i know you have to pull the hood hindge to get that out, but do you have to pull the inner fender to get the heater core box off to get at the heater core? all tips and suggestions welcome. 68 chevy with no A/C thanks for any info Ben __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

08-07-2007, 03:54 PM	#2
rophle1 Registered User Join Date: Jan 2007 Location: Athens, GA Posts: 112	Re: heater core question I had to drop the inner fender to get the bottom screw out. I didn't put the screw back in so that I won't have to drop the fender again. __________________ 1968 C10 Stepside 396 bored .030 TH400

08-07-2007, 03:58 PM	#3
Yeller68 Active Member Join Date: Aug 2001 Location: Villa Rica, Ga Posts: 297	Re: heater core question Sure makes it a lot easier. I didn't have to totally remove the inner fender, just take out several bolts on the back side, and pry it down just enough to get heater box out. And I'm same setup as you 68 w/o AC.

08-07-2007, 04:31 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: heater core question There's a FAQ with a step by step for this.

08-07-2007, 05:58 PM	#5
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	Re: heater core question sorry, didnt have time to search when i posted this. http://67-72chevytrucks.com/vboard/s...ad.php?t=69812 pretty much what i thought just was hopeing there was an easier way __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.