air pressure gauge???? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67cst · 12-19-2002, 03:22 AM

here she be vinnie

67cst · 12-19-2002, 03:23 AM

oops, never realized it was sorta fuzzy, i think you get the idea though?!?!

ckhd · 12-19-2002, 09:48 AM

67cst - I'll trade. I have a tach lens and all that would let you use a tach dash without the air pressure gauge.

Also, you need to be careful about the fuel gauge. Well, not the gauge, but the idiot lights in the fuel gauge. Big trucks usually have different words on them. My c60 has "Overspeed" where "Brake" would be on a pickup. Just use your existing fuel gauge.

The bezel is different too. It's cut deeper for the pickup's steering colum.

694X4 · 12-19-2002, 10:02 AM

67CST I have the same thing out of a big truck in my 69 with the air gauge. All you have to do is buy a new bezel so that it fits your column. I don't realy know what these go for but i payed $140 for the dash then went down the line about 20 yards and got a n.o.s. bezel and new n.o.s. amp gauge for $100. Did I pay too much I bought it a few years ago at a swap meet and never price checked after.

67cst · 12-19-2002, 11:13 AM

thanks for the useful info guys, i was planning on getting a new bezel anways, anyone have an extra one kicking around that is in great shape? also on the back of the tach which wire goes to the distributor and which one goes to power? thanks for the help

Derek

Duallie · 12-20-2002, 03:41 AM

The back of the tach has the wire assignment stamped into it: COIL and 12V. The coil lead goes to the negative side of the points coil or the "TACH" connector on your HEI. The "12V" lead goes to the fuse panel "IGN SW" or something like that.
I think the last link accessed via my signature will show what my tach/air dash looks like. I've got it hooked to the onboard air compressor converted from an A6 A/C compressor.

67cst · 12-20-2002, 04:51 AM

thanks duallie

12-19-2002, 03:22 AM	#26
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	here she be vinnie Attached Images __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-19-2002, 03:23 AM	#27
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	oops, never realized it was sorta fuzzy, i think you get the idea though?!?! __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-19-2002, 09:48 AM	#28
ckhd Registered User Join Date: Oct 2000 Location: St. Johns, Arizona Posts: 2,660	67cst - I'll trade. I have a tach lens and all that would let you use a tach dash without the air pressure gauge. Also, you need to be careful about the fuel gauge. Well, not the gauge, but the idiot lights in the fuel gauge. Big trucks usually have different words on them. My c60 has "Overspeed" where "Brake" would be on a pickup. Just use your existing fuel gauge. The bezel is different too. It's cut deeper for the pickup's steering colum. __________________ my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans?

12-19-2002, 10:02 AM	#29
694X4 Registered User Join Date: Jul 2001 Location: utica, oh, Posts: 249	67CST I have the same thing out of a big truck in my 69 with the air gauge. All you have to do is buy a new bezel so that it fits your column. I don't realy know what these go for but i payed $140 for the dash then went down the line about 20 yards and got a n.o.s. bezel and new n.o.s. amp gauge for $100. Did I pay too much I bought it a few years ago at a swap meet and never price checked after. __________________ 69 3/4 ton 4x4 gmc with 6" sky jacker soft ride. 350 / th350 / 205 work in progress

12-19-2002, 11:13 AM	#30
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	thanks for the useful info guys, i was planning on getting a new bezel anways, anyone have an extra one kicking around that is in great shape? also on the back of the tach which wire goes to the distributor and which one goes to power? thanks for the help Derek __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-20-2002, 03:41 AM	#31
Duallie Registered User Join Date: Feb 2001 Location: Nikiski, Alaska Posts: 477	The back of the tach has the wire assignment stamped into it: COIL and 12V. The coil lead goes to the negative side of the points coil or the "TACH" connector on your HEI. The "12V" lead goes to the fuse panel "IGN SW" or something like that. I think the last link accessed via my signature will show what my tach/air dash looks like. I've got it hooked to the onboard air compressor converted from an A6 A/C compressor. __________________ Just as if I knew what I was doin'

12-20-2002, 04:51 AM	#32
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	thanks duallie __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.