Blazer Tailgate Seal Retainers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hgs_notes · 08-08-2007, 11:00 PM

As a matter of fact, I don't know what to call them. These are the plates that hold the seals in place for the tailgate to bed side seal. In good shape with screws included. $10.00 shipped.SOLD, thanks Jim

JWPOORE · 08-09-2007, 01:02 AM

You don't happen to have a picture of exactly where these go and what they look like when they are on the truck? I am clueless on where they go and do not see them on my truck so I would be interested in them if I knew exactly what they look like on a truck and if my truck needs them.

**6t727t2** · 08-09-2007, 06:26 AM

Next in line, I'll take them.

hgs_notes · 08-09-2007, 07:45 AM

JWPOORE, This pic shows it. Look on the right side of the bed side, where the tailgate would meet up with it. The black line is the rubber seal it holds in place.

This is not normally installed on trucks, but lets say you had a nice bed cover and wanted to be able to seal the tailgate tight, these parts from a blazer would do it. FYI, there is also a seal that goes along the bed floor, held down by a carpet strip, and a seal on the bottom of the blazer hatch, which meets with another metal strip that runs along the top of the tailgate.

I have that top strip also, but I don't want to sell it and ship it because the last time a shipped a long skinny metal part, it ended up being two long skinny broken parts and the buyer was not happy. I ended up loosing the part and the cost to ship it.

6t727t2, you are next in line.

LUV2XCLR8 · 08-09-2007, 02:41 PM

Damn, missed an awesome deal there, 3rdsy's (Like that will happen)

JWPOORE · 08-09-2007, 05:38 PM

PM Sent

JWPOORE · 08-09-2007, 05:47 PM

Payment sent. Thank you!

08-08-2007, 11:00 PM	#1
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Blazer Tailgate Seal Retainers As a matter of fact, I don't know what to call them. These are the plates that hold the seals in place for the tailgate to bed side seal. In good shape with screws included. $10.00 shipped.SOLD, thanks Jim __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 08-09-2007 at 07:32 PM.

08-09-2007, 01:02 AM	#2
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: Blazer Tailgate Seal Retainers You don't happen to have a picture of exactly where these go and what they look like when they are on the truck? I am clueless on where they go and do not see them on my truck so I would be interested in them if I knew exactly what they look like on a truck and if my truck needs them.

08-09-2007, 06:26 AM	#3
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,454	Re: Blazer Tailgate Seal Retainers Next in line, I'll take them.

08-09-2007, 07:45 AM	#4
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Blazer Tailgate Seal Retainers JWPOORE, This pic shows it. Look on the right side of the bed side, where the tailgate would meet up with it. The black line is the rubber seal it holds in place. This is not normally installed on trucks, but lets say you had a nice bed cover and wanted to be able to seal the tailgate tight, these parts from a blazer would do it. FYI, there is also a seal that goes along the bed floor, held down by a carpet strip, and a seal on the bottom of the blazer hatch, which meets with another metal strip that runs along the top of the tailgate. I have that top strip also, but I don't want to sell it and ship it because the last time a shipped a long skinny metal part, it ended up being two long skinny broken parts and the buyer was not happy. I ended up loosing the part and the cost to ship it. 6t727t2, you are next in line. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff Last edited by hgs_notes; 08-09-2007 at 07:46 AM.

08-09-2007, 02:41 PM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Blazer Tailgate Seal Retainers Damn, missed an awesome deal there, 3rdsy's (Like that will happen) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-09-2007, 05:38 PM	#6
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: Blazer Tailgate Seal Retainers PM Sent

08-09-2007, 05:47 PM	#7
JWPOORE Registered User Join Date: Nov 2006 Location: Central Valley, CA Posts: 198	Re: Blazer Tailgate Seal Retainers Payment sent. Thank you!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.