The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-09-2007, 03:58 PM   #1
Luvlegs
Registered User
 
Luvlegs's Avatar
 
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
one last (fingers crossed) ps ? re: belt

My ps setup is now installed! Ye ha! In the pic of the vehicle it came off of (70 4x4 blazer, I250), there is ONE belt that encompasses the crank, fan, alternator and ps. I THINK I've got the part number (advance auto's) - it's 15400.

Can anyone verify that or have another part number or length? If all goes well, I should be able to do the belt in the a.m. and then take her for a spin...
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)

Wear your PPE! You can eat with false teeth but you can't see with a false eye.

1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Luvlegs is offline   Reply With Quote
Old 08-09-2007, 05:24 PM   #2
Luvlegs
Registered User
 
Luvlegs's Avatar
 
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
Re: one last (fingers crossed) ps ? re: belt

ttt before I leave work - hoping someone can jump in.
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)

Wear your PPE! You can eat with false teeth but you can't see with a false eye.

1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Luvlegs is offline   Reply With Quote
Old 08-09-2007, 07:31 PM   #3
Richard H.
Spanked once
 
Richard H.'s Avatar
 
Join Date: Oct 2006
Location: Intheshop, Indiana
Posts: 969
Re: one last (fingers crossed) ps ? re: belt

Can you get your hands on a seamstress tape measure , the cloth type? The measurement you want is the outside around the pulley's not inside the groove.
The 15400 means it is a 1/2" belt 40 inches long I believe.
Richard H. is offline   Reply With Quote
Old 08-09-2007, 11:23 PM   #4
Luvlegs
Registered User
 
Luvlegs's Avatar
 
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
Re: one last (fingers crossed) ps ? re: belt

You are right on the belt. I stopped at advance, I knew approximately the size (good eye for that sort of thing) - first one they pulled 15400 wasn't even close so I looked at their computer and saw one listed as outter lug, 50".... I said, that's it. I got it on tonight - fit perfectly! I had filled the pump last night and let it set all day. When I got home tonight, it had drained down into the gear box. I filled the pump again and after about 5 lock to lock turns, no more air - works too danged cool. Finished at 10 tonight - first thing in the am, it's out for a test drive!!!!
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer"
(you don't always have to state the obvious)

Wear your PPE! You can eat with false teeth but you can't see with a false eye.

1959 Studebaker Silverhawk 350/400
1972 C10 L6 3OTT
2005 F350 - Built - whew!
Luvlegs is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com