My One Ton and Other - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tractorsx · 08-10-2007, 01:59 PM

I see some people like to look at PU's that aren't cruisers and show trucks so I will show a little of what I have. Both are 71's one ton flat was bought for a part truck, thinking I could sell hoist and make a little money, but I liked It so much and is very usefull I just keep it. Other one is a 3/4 ton that I have had for serveral years just now starting to do a frame off rebuild and will put a nice flat bed back on it and us as a daily driver. Both ran-run good with not much rust or mechanical problems. Oh, by the way the one ton is used to haul my trash to landfill so that is why it has the generic cover, but grandkids think it was built as a camper

ChevLoRay · 08-10-2007, 02:13 PM

Well, it wouldn't take much to make a camper out of it, now would it? Then, when you get back home, just hit the dump button and let it all slide out the back, and back to work you go. Multi-tasking at its' best.

**jerry moss** · 08-10-2007, 04:27 PM

I used to hunt around craig back in the 90s with a gentleman named J.B. Chapman. him and his dad had an auto repair shop in town and were real nice people. everyone we met back there was really friendly and the country around there is gorgeous. lots of our trucks back then too.
nice looking projects

**Yukon Jack** · 08-10-2007, 04:48 PM

They both look great to me. Gotta like functional!

**special-K** · 08-10-2007, 06:27 PM

Moffit County,now that`s wild Colorado country.I knew a guy in Matbell named Roger German.He lived at the county road shop and had Chesapeake Bay Retrievers.He gave me a tour around the county that I felt priviledged to see.
Back to your thread...Nice pair of trucks.Looks like a nice flatbed you`re puttin`on the K/20.

67_C-30 · 08-10-2007, 06:41 PM

Cool trucks! I'm partial to the 1 ton!!

powell72 · 08-10-2007, 10:55 PM

Couple of good old working trucks. My dad and I are planning a trip to Craig at the end of the summer to go snoop around at Ike's Transmission and Auto Salvage.

Big D · 08-11-2007, 10:37 PM

I like to see more pics of the flatbed on the 3/4 if you have any. How wide is it? I've been thinking about putting a nice flatbed on my 3/4 4x4 project.

I can pick up a nice used flatbed around here for around 500 bucks, but the ones I looked at were around 7 1/2 feet wide and would hang out past the cab. yours looks pretty much flush with it.

08-10-2007, 01:59 PM	#1
tractorsx Registered User Join Date: Sep 2006 Location: Craig Co Posts: 17	My One Ton and Other I see some people like to look at PU's that aren't cruisers and show trucks so I will show a little of what I have. Both are 71's one ton flat was bought for a part truck, thinking I could sell hoist and make a little money, but I liked It so much and is very usefull I just keep it. Other one is a 3/4 ton that I have had for serveral years just now starting to do a frame off rebuild and will put a nice flat bed back on it and us as a daily driver. Both ran-run good with not much rust or mechanical problems. Oh, by the way the one ton is used to haul my trash to landfill so that is why it has the generic cover, but grandkids think it was built as a camper Attached Images

08-10-2007, 02:13 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: My One Ton and Other Well, it wouldn't take much to make a camper out of it, now would it? Then, when you get back home, just hit the dump button and let it all slide out the back, and back to work you go. Multi-tasking at its' best. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-10-2007, 04:27 PM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,960	Re: My One Ton and Other I used to hunt around craig back in the 90s with a gentleman named J.B. Chapman. him and his dad had an auto repair shop in town and were real nice people. everyone we met back there was really friendly and the country around there is gorgeous. lots of our trucks back then too. nice looking projects __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA Last edited by jerry moss; 08-10-2007 at 04:27 PM.

08-10-2007, 04:48 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	Re: My One Ton and Other They both look great to me. Gotta like functional! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

08-10-2007, 06:27 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: My One Ton and Other Moffit County,now that`s wild Colorado country.I knew a guy in Matbell named Roger German.He lived at the county road shop and had Chesapeake Bay Retrievers.He gave me a tour around the county that I felt priviledged to see. Back to your thread...Nice pair of trucks.Looks like a nice flatbed you`re puttin`on the K/20. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-10-2007, 06:41 PM	#6
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: My One Ton and Other Cool trucks! I'm partial to the 1 ton!! __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

08-10-2007, 10:55 PM	#7
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: My One Ton and Other Couple of good old working trucks. My dad and I are planning a trip to Craig at the end of the summer to go snoop around at Ike's Transmission and Auto Salvage. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

08-11-2007, 10:37 PM	#8
Big D Registered User Join Date: Apr 2005 Location: Dunlap, IL Posts: 308	Re: My One Ton and Other I like to see more pics of the flatbed on the 3/4 if you have any. How wide is it? I've been thinking about putting a nice flatbed on my 3/4 4x4 project. I can pick up a nice used flatbed around here for around 500 bucks, but the ones I looked at were around 7 1/2 feet wide and would hang out past the cab. yours looks pretty much flush with it. __________________ 68 GMC 64 1/2 Mustang convert A bachelor's life is no life for a single man." - Samuel Goldwyn



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.