Tire Fitment Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ChaseDale3and8 · 08-11-2007, 06:25 PM

We are going to have to buy new tires very soon for my wife's 2002 Durango. It has 265-75-16s on it which is the same size of tire that my 2003 Z71 Silverado came with.

My tires only have just over 15,000 miles on them, and I'm thinking about upgrading my truck to a 285-75-16 if they will fit with no rubbing, then put my tires on the Durango.

Does anybody know if a 285 will fit without rubbing? It appears just by looking that I have room for a bigger tire. The 265s don't fill the wheelwells up completely. I just wondered if anybody here has run a 285 on the 99 and up trucks without any rubbing. ...Joe

earl87gta · 08-12-2007, 06:20 AM

I run 285 on my D- max I had to crank the Tbars up a little but the rid fine. I would take pics but I have put a KMA bumper on the front now so I have even more room.

**special-K** · 08-12-2007, 09:25 AM

I see people running 285/75s on the`99-ups and some say no cranking the "T"s was needed.But,they prolly didn`t have diesels.I`ve been running them on`88-ups for year with diesels,crankes t-bars,and the little bumper filler removed.With 8" wheels it gets a bit tight at time and`ll rub.

ChaseDale3and8 · 08-13-2007, 04:02 PM

Thanks guys I knew somebody here would know. ...Joe

08-11-2007, 06:25 PM	#1
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Tire Fitment Question We are going to have to buy new tires very soon for my wife's 2002 Durango. It has 265-75-16s on it which is the same size of tire that my 2003 Z71 Silverado came with. My tires only have just over 15,000 miles on them, and I'm thinking about upgrading my truck to a 285-75-16 if they will fit with no rubbing, then put my tires on the Durango. Does anybody know if a 285 will fit without rubbing? It appears just by looking that I have room for a bigger tire. The 265s don't fill the wheelwells up completely. I just wondered if anybody here has run a 285 on the 99 and up trucks without any rubbing. ...Joe __________________ I'm not speedin'! I'm qualifyin'!

08-12-2007, 06:20 AM	#2
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Tire Fitment Question I run 285 on my D- max I had to crank the Tbars up a little but the rid fine. I would take pics but I have put a KMA bumper on the front now so I have even more room. __________________ Earl 68 2500 4x4 GMC Burb

08-12-2007, 09:25 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Tire Fitment Question I see people running 285/75s on the`99-ups and some say no cranking the "T"s was needed.But,they prolly didn`t have diesels.I`ve been running them on`88-ups for year with diesels,crankes t-bars,and the little bumper filler removed.With 8" wheels it gets a bit tight at time and`ll rub. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-13-2007, 04:02 PM	#4
ChaseDale3and8 Registered User Join Date: Jun 2007 Location: Springfield Mo. Posts: 1,086	Re: Tire Fitment Question Thanks guys I knew somebody here would know. ...Joe __________________ I'm not speedin'! I'm qualifyin'!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.