just an idea........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hewlett2002000 · 08-15-2007, 09:36 PM

ive had an idea for a while but i would not even attempt it right now for lack of cash. i would like to get a new chevy/gmc truck, most likely wrecked with a good frame and running gear and interior. around like 99 or 2000 model. id like to put a 64-66 body on it and leave all the running gear from the new one, and take the dash and all interior and make it look as much like the new truck on the inside as possible. like on the outside it looks just like a stock 64-66 truck, but on the inside it looks just like a 99 or 2000 truck and rides and drives the same. really since i think about it, it wouldent really be that expensive to do if i could find a newer truck in good condition wrecked for cheap. just alot of fabricating to make things fit. what do yall think? im going to do this someday so please tell me any ideas you have or any links or pics to anybody else thats done something similar.
thanks,
John

Stepside65 · 08-15-2007, 10:22 PM

I've been thinkin bout stealin a chassis from a newer truck for a while. I'm fine with the old interior style.

Preacher · 08-15-2007, 10:22 PM

I've had a simular idea like that. I would keep the interior stock looking with modern day equipment eg. power windows door locks stereo, that sort of thing.

Jdub · 08-15-2007, 10:40 PM

I personally am fond of the 60's interiors. Its one of my favorite things about them. Nowadays the full sheet metal interior is pretty desirable in new car fabrication. Nonetheless, my 2000 gmc sierra is for sale if you like the interiors that much.

David Flores · 08-15-2007, 10:58 PM

I agree. I love the 60's interior. Although, I am adding power windows, and remote door open/closer.

ClassicAutoResto · 08-15-2007, 11:39 PM

Go for it! Just rememberthe electronics,(computers, harnesses,guages,sensors,etc) will have to be retained for the newer chassis to run. Precise planning would be critical or the truck WILL NOT RUN. Good luck whenever you get to start on it. Jerry

David Flores · 08-15-2007, 11:43 PM

I thought you hated newer vehicles though...

ClassicAutoResto · 08-15-2007, 11:58 PM

I am having a difficult enough time with an 84 chassis swap out, and I do restoration for a living! I'll keep you posted on the 84 swap-out to give you an idea of what it takes. Jerry

hewlett2002000 · 08-16-2007, 12:44 AM

yea well theres no way id start something like this now or any time soon. in fact i would trade my truck and all $2000 worth of **** i have sitting on a shelf for it for ANYTHING that drives right now. in fact im gonna go post an ad now. i gotta have something to drive, cause i have $6 to my name and nothing else left to sell and i cant get to work with no wheels.
john

fercho71 · 08-16-2007, 12:46 AM

u know i am fan of the old interiors specially on the classic steering wheel with the ring and all that stuff i don't consider my self and expert to give technical advise but to be hones it would be interesting to see some pictures.
good lock john.

Fer

jchav62 · 08-16-2007, 11:24 AM

I've seen it done to a 67 (newer running gear and gauges). It's possible.

retselgerg · 08-16-2007, 11:42 AM

I've seen a 50's chevy truck done with a about a 95 so, if idone it i would keep it in a stock looking package. just my opinon

jchav62 · 08-16-2007, 01:07 PM

I agree with keeping a stock appearance...

08-15-2007, 09:36 PM	#1
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	just an idea........ ive had an idea for a while but i would not even attempt it right now for lack of cash. i would like to get a new chevy/gmc truck, most likely wrecked with a good frame and running gear and interior. around like 99 or 2000 model. id like to put a 64-66 body on it and leave all the running gear from the new one, and take the dash and all interior and make it look as much like the new truck on the inside as possible. like on the outside it looks just like a stock 64-66 truck, but on the inside it looks just like a 99 or 2000 truck and rides and drives the same. really since i think about it, it wouldent really be that expensive to do if i could find a newer truck in good condition wrecked for cheap. just alot of fabricating to make things fit. what do yall think? im going to do this someday so please tell me any ideas you have or any links or pics to anybody else thats done something similar. thanks, John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

08-15-2007, 10:22 PM	#2
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: just an idea........ I've been thinkin bout stealin a chassis from a newer truck for a while. I'm fine with the old interior style. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

08-15-2007, 10:22 PM	#3
Preacher New Member Join Date: Jul 2007 Location: Rochester, NY Posts: 19	Re: just an idea........ I've had a simular idea like that. I would keep the interior stock looking with modern day equipment eg. power windows door locks stereo, that sort of thing.

08-15-2007, 10:40 PM	#4
Jdub Big gulps huh? Join Date: Aug 2007 Location: Moore, OK Posts: 63	Re: just an idea........ I personally am fond of the 60's interiors. Its one of my favorite things about them. Nowadays the full sheet metal interior is pretty desirable in new car fabrication. Nonetheless, my 2000 gmc sierra is for sale if you like the interiors that much. __________________ When in Rome.. 1966 Chevy C10 Long Stepside: PROJECT TRUCK= custom cracked windshield, and uhh some sweet boat carpet 2000 GMC Sierra Short Wide: SHOW TRUCK= 22's, bags, performance engine, system, tv, blah blah blah 2004 VTX 1300C: DAILY DRIVER= Custom flame paint job, pipes, grips, mirrors, lights, pegs, etc etc ...2006 Honda Accord: OLD LADYS RIDE

08-15-2007, 10:58 PM	#5
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: just an idea........ I agree. I love the 60's interior. Although, I am adding power windows, and remote door open/closer. __________________ 66 c10 swbfs My Build.

08-15-2007, 11:39 PM	#6
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: just an idea........ Go for it! Just rememberthe electronics,(computers, harnesses,guages,sensors,etc) will have to be retained for the newer chassis to run. Precise planning would be critical or the truck WILL NOT RUN. Good luck whenever you get to start on it. Jerry

08-15-2007, 11:43 PM	#7
David Flores Registered User Join Date: May 2007 Location: Temple Texas Posts: 399	Re: just an idea........ I thought you hated newer vehicles though... __________________ 66 c10 swbfs My Build.

08-15-2007, 11:58 PM	#8
ClassicAutoResto Rust Buster Join Date: Apr 2007 Location: Lebanon, Ky Posts: 558	Re: just an idea........ I am having a difficult enough time with an 84 chassis swap out, and I do restoration for a living! I'll keep you posted on the 84 swap-out to give you an idea of what it takes. Jerry

08-16-2007, 12:44 AM	#9
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: just an ida........ yea well theres no way id start something like this now or any time soon. in fact i would trade my truck and all $2000 worth of **** i have sitting on a shelf for it for ANYTHING that drives right now. in fact im gonna go post an ad now. i gotta have something to drive, cause i have $6 to my name and nothing else left to sell and i cant get to work with no wheels. john __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.

08-16-2007, 12:46 AM	#10
fercho71 Registered User Join Date: Jun 2007 Location: sandiego, ca Posts: 453	Re: just an idea........ u know i am fan of the old interiors specially on the classic steering wheel with the ring and all that stuff i don't consider my self and expert to give technical advise but to be hones it would be interesting to see some pictures. good lock john. Fer __________________ 1966 chevy c-20 truck " La Chata " under construccion

08-16-2007, 11:24 AM	#11
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: just an idea........ I've seen it done to a 67 (newer running gear and gauges). It's possible. __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

08-16-2007, 11:42 AM	#12
retselgerg Registered User Join Date: Mar 2007 Location: Grundy Virginia Posts: 385	Re: just an idea........ I've seen a 50's chevy truck done with a about a 95 so, if idone it i would keep it in a stock looking package. just my opinon __________________ "OLE BLUE" Goodwrench 350, 5speed, Tilt, PS, PB, "some guys got into cars for money or girls but i got into cars because of the cars" -Jay Leno

08-16-2007, 01:07 PM	#13
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: just an idea........ I agree with keeping a stock appearance... __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.