68 Chevy C-10 project for sale

[bigblock69]

Here goes, I have a 1968 chevy C-10. I have more parts than I can possible remember so I will update this tomorow and have photos.

The frame has been sandblasted primed and painted by a professional restoration shop. The front brakes are upgraded to 12 inch cross drilled and slotted rotors from early classic enterprises. It had a classic drop "6 rear 4 front" also from ECE and all new stainless or grade 8 hardware. It has a drop center cross member with a 700R4 trans crossmember also from ECE. The rear end is factory 12in with eaton posi and new 3.73 gears along with Mosler axles. The trailing arms are custom from ECE. Everything on this frame is painted or powder coated. I have new big block mount towers and engine mounts and will include small block towers as well. A Custom made drive shaft is included.

The cab is a 68 cab and has been soda blasted and put into primer. there are some dents which need some attention some of them have already been fixed. The cabcorners can be saved; however, I do have new ones that go with the truck. I had new rockers installed at a local body shop that did not align them correctly so I have two new rockes that go with it at well. Along with that I have the forward tower braces "dog ears" if you want to install them as well. Two new doors along with usable originals. The floor is solid, so no suprises. The fire wall is partially shaved to make way for vintage air.

The bed is a very solid short bed fleetside with a steel floor which has been soda blasted as well and is in primer. There are a few dents in it which need attention as well. It has a new front panel "the good fitting one" and a new left wheel tub. The underside has not been undercoated yet.

I have a new left fender, core support, new inner fenders, barely used 4 core radiator, and a new Goodmark cowl induction hood. Along with the purchase of this truck goes a 70 long bed "parts truck" and everything in the bed of it. It has alot of old, possibly usable parts. Every part I have for 67-72 chevy truck is included.

The Engine is a 30 over 454 built just plain crazy. I would like to seperate it from the truck and hold on to it, but it can go it the offer is correct. Aprox 525 HP at the crank.

Same with the transmission as with the engine. I would like to keep it but everythin is for sale. It is a 700R4 built to withstand 700hp and is powder coated.

This is an excellent project truck and I do want to finish it; however, I am in the military and am going where a restoration is not possible . I have done, in my mind the best possible job that can be done on a restoration and this project "what is completed" is as close to perfect as possible. I am sure that I have left some stuff out so I will include my emial and my number and will update this soon.

qwkcbr@yahoo.com
618-792-6646 Cell
Location St. Louis, MO

Price, we all know, the trucks we love tend not to bring about big numbers in the final sale or trade provided that is what your intentions are. I have invested way more time and money that I can possibly get for this truck and I have all the reciepts to prove it. I am selling this for $10,000 and I feel this is reasonable for a truck like this and those of you who have done custom projects like this will agree. Let my loss be your gain. I look forward to talking to you.

Thanks
Josh

[Liz]

Please keep all trucks for sale in the trucks for sale area, thanks http://67-72chevytrucks.com/vboard/c...ndex.php?cat=8