what is this? stereo wiring question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

>X< · 12-23-2002, 04:50 PM

yeah, well i had a urge to do some work on truck today, so i finished shaving front side markers, started on back ones, took ot glovebox and took out crappy tape player (see other post about friggin dash) because i'm about t do something to dash, dont realy know what yet though.

BUt anyway, i was labeling the wires for the stereo and i am stumped. theres are two wires that go from back of stereo, spliced n to speaker wire, then split apart again, one goes t fusebox luster of wires and one goes to this thing that is near my gas pedal. when you push the pedal in it hits this plastic thing that either cuts off or gives elec. to this wire, that goes back to stereo. what the hell is this? a volume control, maybe turns it up? i never ad any speakers in so i dont know what it does, radio does work though. an thoughts? i took soem pictures but they came outbad so i'll get some more in a minute. thanks, sean

>X< · 12-23-2002, 05:45 PM

here's a picture of he switch. only one of the metal things had a wire connected to it, the brown piece of plastic moves in and out, the rubber was the guys way of adjusting it, the rbber piece is what the top of the pedal hits to move the brown piece

RED72blazer · 12-23-2002, 06:30 PM

Do you have any better pics? It looks to me like the kick down swich for a pontiac. I have one, if you get A better pic I'll compare them.

jostrans68 · 12-23-2002, 09:48 PM

its a gas pedal mounted kickdown for a th400 stock on 72s

>X< · 12-24-2002, 01:43 AM

what is a kickdown switch? why does it go to the stereo? my guess is that it turns the radio louder with throttle, but i guess it doesnt work. i'll get a pic wtih it installed tomorrow

>X< · 12-24-2002, 02:39 PM

if i was at my house i wuld take a pic, its in a bracket that has to be stock, you cant take the bracket of, it holds the pedal on. do yall think i should take it off or leave it? i'm trying to get rid of junk wires and kinda replace the important stuff

redneck_chev · 12-24-2002, 02:55 PM

seanh71
That switch is for a th400. That is the electronic passing gear switch. I dont know why it is running through the stereo wiring harness.
I hope this helps
redneck_chev

>X< · 12-24-2002, 06:19 PM

so since i have a turbo 350 with no wires going to it, its safe to take it out? thanks for the help guys

12-23-2002, 04:50 PM	#1
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	what is this? stereo wiring question yeah, well i had a urge to do some work on truck today, so i finished shaving front side markers, started on back ones, took ot glovebox and took out crappy tape player (see other post about friggin dash) because i'm about t do something to dash, dont realy know what yet though. BUt anyway, i was labeling the wires for the stereo and i am stumped. theres are two wires that go from back of stereo, spliced n to speaker wire, then split apart again, one goes t fusebox luster of wires and one goes to this thing that is near my gas pedal. when you push the pedal in it hits this plastic thing that either cuts off or gives elec. to this wire, that goes back to stereo. what the hell is this? a volume control, maybe turns it up? i never ad any speakers in so i dont know what it does, radio does work though. an thoughts? i took soem pictures but they came outbad so i'll get some more in a minute. thanks, sean __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-23-2002, 05:45 PM	#2
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	here's a picture of he switch. only one of the metal things had a wire connected to it, the brown piece of plastic moves in and out, the rubber was the guys way of adjusting it, the rbber piece is what the top of the pedal hits to move the brown piece Attached Images __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-23-2002, 06:30 PM	#3
RED72blazer urban fourwheelin Join Date: Aug 2002 Location: Seattle Posts: 1,007	Do you have any better pics? It looks to me like the kick down swich for a pontiac. I have one, if you get A better pic I'll compare them. __________________ 1972 K5 Blazer with Cummins 4BT, NV4500 swap in the parts gathering stage.

12-23-2002, 09:48 PM	#4
jostrans68 Jostrans68 Join Date: Mar 2001 Location: Bloomington indiana Posts: 1,182	its a gas pedal mounted kickdown for a th400 stock on 72s __________________ [CGTW Member former 67-72 now with a 96 silverado

12-24-2002, 01:43 AM	#5
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	what is a kickdown switch? why does it go to the stereo? my guess is that it turns the radio louder with throttle, but i guess it doesnt work. i'll get a pic wtih it installed tomorrow __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-24-2002, 02:39 PM	#6
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	if i was at my house i wuld take a pic, its in a bracket that has to be stock, you cant take the bracket of, it holds the pedal on. do yall think i should take it off or leave it? i'm trying to get rid of junk wires and kinda replace the important stuff __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.

12-24-2002, 02:55 PM	#7
redneck_chev Registered User Join Date: May 2000 Location: Jeffersonville, Kentucky Posts: 28	seanh71 That switch is for a th400. That is the electronic passing gear switch. I dont know why it is running through the stereo wiring harness. I hope this helps redneck_chev __________________ 1967 Chevy C-10 fleetside SB 3speed on column Corvette yellow#35 Black W/Red Metal Flake int. looks like Black cherry Diamond White Pearl /Grille Jenson CD system Wooden bed

12-24-2002, 06:19 PM	#8
>X< registered IWATA user Join Date: Feb 2002 Location: Baton Rouge Posts: 4,481	so since i have a turbo 350 with no wires going to it, its safe to take it out? thanks for the help guys __________________ -'63 Ford Fairlane 500 coupe, v8, auto, faded and rusty. awaiting built roller 302 and some flat black -'99 Honda Prelude. vtech/5spd. no pipe, no intake, bone stock. awaiting new top end. -01 GMC Yukon SLT 5.3 dented and scratched with a noisy tranny. Take off that Von Dutch hat before i stab you with a 000 Mack.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.