Question for Crazy Longhorn - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neonlarry · 12-25-2002, 03:42 PM

In this pic, where did you get that alternator, or how did you make it that color? I want a red one for mine, and I can't decide if I should take one apart and have the case powdercoated, buy a new onw, or what.

bigjimzlll · 12-25-2002, 04:26 PM

proform makes powder coated and chrome ones for 99.99

crazy longhorn · 12-25-2002, 04:53 PM

The pic doesnt show for me Larry, but if its a shot from webshots on my 69 its a 73 up alt that is painted with high temp eng enamel. I just pulled the pulley & fan off , & taped the holes & squirted it. the color is a Ford red, same as my sb.

neonlarry · 12-25-2002, 05:13 PM

Yea, it's your picture. That looks pretty nice, I will have to try it. Did you use primer on it or anything, or did you just spray it with the engine paint?

crazy longhorn · 12-25-2002, 05:22 PM

I had a buddy givin me hell about that "ratty lookin alt" on that fresh sb.....he thought i needed chrome, but i didnt think so! No, i didnt use any primer, just cleaned it up good with brake clean, & squirted it. I dont drive in the wet, or slick but the paint has been on there for 5 yrs.......a cheap detail , on a low bucks toy!

neonlarry · 12-25-2002, 05:26 PM

Cool, I got a free one, and I have to take it apart anyway to clean it, so I will give it a try. If I get a chance, I will post a pic of it when I am finished too.

crazy longhorn · 12-25-2002, 05:33 PM

Thats the way to go.....spend the bucks on what makes em "go fast", & a little elbow grease will do the details

you wont see too much chrome on my truck......it wont make it run any faster

neonlarry · 12-25-2002, 08:14 PM

Quote:

spend the bucks on what makes em "go fast", & a little elbow grease will do the details

Amen lol

12-25-2002, 03:42 PM	#1
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Question for Crazy Longhorn In this pic, where did you get that alternator, or how did you make it that color? I want a red one for mine, and I can't decide if I should take one apart and have the case powdercoated, buy a new onw, or what. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-25-2002, 04:26 PM	#2
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	proform makes powder coated and chrome ones for 99.99 __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

12-25-2002, 04:53 PM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	The pic doesnt show for me Larry, but if its a shot from webshots on my 69 its a 73 up alt that is painted with high temp eng enamel. I just pulled the pulley & fan off , & taped the holes & squirted it. the color is a Ford red, same as my sb. __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-25-2002, 05:13 PM	#4
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Yea, it's your picture. That looks pretty nice, I will have to try it. Did you use primer on it or anything, or did you just spray it with the engine paint? __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-25-2002, 05:22 PM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	I had a buddy givin me hell about that "ratty lookin alt" on that fresh sb.....he thought i needed chrome, but i didnt think so! No, i didnt use any primer, just cleaned it up good with brake clean, & squirted it. I dont drive in the wet, or slick but the paint has been on there for 5 yrs.......a cheap detail , on a low bucks toy! __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

12-25-2002, 05:26 PM	#6
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Cool, I got a free one, and I have to take it apart anyway to clean it, so I will give it a try. If I get a chance, I will post a pic of it when I am finished too. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-25-2002, 05:33 PM	#7
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Thats the way to go.....spend the bucks on what makes em "go fast", & a little elbow grease will do the details you wont see too much chrome on my truck......it wont make it run any faster __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.