FS: Factory Big Block Truck Parts

[Classic Bowties]

All of these parts with the exception of the 68-71 stands were just removed from a running 72 with BBC 402/Th400 with 80k original, all are in great working condition. Payment by paypal if shipped or cash in hand upon pickup, I can also accept credit card payments thru paypal. Thanks, Cb

72 BBC Frame Stands, Motor Mounts and Clamshells w/thru bolts. - Sold to "67"StepSide

72 BBC Alternator & 3 Piece Bracket Set (for short W.P. only). - Sold to 396muncie

68-72 BBC Power Steering Pump, Pulley, Reservoir & both Brackets (for short W.P. only). - $250... Free Shipping

68-72 BBC/TH400 Trans Shift Linkage with Rod and BBC Frame Pivot. - $75... Free Shipping

68-72 BBC Pulleys for short W.P. only. 1-two groove crank, 1-single groove crank for power steering and 1-two groove w.p. pulley. - $100... Free Shipping

67-72 Radiator Mounts for AC, H.D. Cooling and 4 core equipped trucks - Uppers & Lowers with all 4 rubber cushions - Sold to Musclerodz - but I do have more of these available.

68-71 BBC Motor Stand Set - Sold to Stepside_Sweden - but I do have more of these available.

[Classic Bowties]

Pics of Big Block Stands.

[48 ish]

I'm overseas right now, will be back in Aug. I'll buy them if you still have then.

[Classic Bowties]

Originally Posted by 48 ish

I'm overseas right now, will be back in Aug. I'll buy them if you still have then.

48 ish > when you return this august if you are still in need of these parts I will most likely have a few Big Block parts trucks around yet to get you going as I see you are just north of me, but for now all the parts in this post are still for sale. C.B.

[manimal]

C.B., could I get a pic of the back side of the alternator bracket? I need the brace that runs from the top to the exhaust manifold-may have to make one from cr stock,just need to see the angles of the flats. Thanks
-Lance

[KJ69]

I am interested in purchasing the shift linkage parts. Is this all I would need to hook up to my 400turbo? I am running a small block 350 and removing my straight shift transmission to install an automatic. So far I have the tranny, crossmember, automatic steering column. Is this all these is to the linkage I would need?

Thanks,
Kelly

[Stepside_Sweden]

I would like to buy the Motor mounts/stands

Can you ship to Sweden?

How much will it cost to ship ?

My shipping adress is

Henrik Johansson
Spireavägen 4
26041 Nyhamnsläge
Sweden

[396muncie]

Alternator bracket set sold. Alternator still available. Payment sent. Thank you!!

[Musclerodz]

I will take the 4 core radiator brackets. Tell me where to paypal the money to

Mike

[Classic Bowties]

Originally Posted by KJ69

I am interested in purchasing the shift linkage parts. Is this all I would need to hook up to my 400turbo? I am running a small block 350 and removing my straight shift transmission to install an automatic. So far I have the tranny, crossmember, automatic steering column. Is this all these is to the linkage I would need?

Thanks,
Kelly

KJ69 - I dont think you need the big block linkage. The BB setup uses a different frame pivot and the mainrod is longer and has a bend in it as it has to clear the firewall because of motor/trans position, the BB/th400 setup sits farther to the rear then the SB/th400 does. Below is a pic of the BB setup (top) compared to a SB setup (bottom) that was removed from a 70 C10 w/350 & th400. Let me know what setup you are going to need. I will take $45... shipped for the SB trans setup. Thanks, Cb

manimal - the picture you wanted is below

Stepside Sweden - pm returned & working on getting shipping cost to Sweeden

396 muncie - pm returned & parts sent

musclerodz - pm returned & parts sent

[manimal]

Thank You C.B.
-Lance

[Classic Bowties]

ttt

[Musclerodz]

You wouldn't happen to have just the can extra that goes on the back of the power steering pump would you? I have a customer that needs the can only.

Mike

[suville]

How much with shipping to 83647 for a pair of frame towers (rt pic) dont even need the clamshells just the towers. Thanks for your time!

[396muncie]

Are the pulleys the right ones for A/C? If so, are they different than small block with A/C? I know the top one is the same, but not sure about the bottoms.

[48 ish]

Classic Bowties, I'm back and in need of everything BBC. I always enjoy a drive to Portland, what do you have left?

[Classic Bowties]

Originally Posted by Musclerodz

You wouldn't happen to have just the can extra that goes on the back of the power steering pump would you? I have a customer that needs the can only.Mike

Musclerodz: Sorry, I do not have it separate, I only have complete BBC pump, brackets, and resrvoir setups available at this time. Cb

Originally Posted by suville

How much with shipping to 83647 for a pair of frame towers (rt pic) dont even need the clamshells just the towers. Thanks for your time!

suville: The above listed 72 BBC towers have been sold already and I dont have any pulled and ready to ship as of right now, but if 68-71 BBC towers will work for you I could ship as soon as payment is received. LMK, Cb

Originally Posted by 396muncie

Are the pulleys the right ones for A/C? If so, are they different than small block with A/C? I know the top one is the same, but not sure about the bottoms.

396muncie: Yes, the pictured pulleys are the correct ones for A/C and all three pulleys were removed from the same 72 402 truck with air, this pulley setup is for BBC SWP applications only. Cb

[Classic Bowties]

Originally Posted by 48 ish

Classic Bowties, I'm back and in need of everything BBC. I always enjoy a drive to Portland, what do you have left?

48 ish: I have everything listed above (even the ones marked sold) in duplicates already pulled & ready to ship except for the 72 BBC towers and the 9 BBC air brackets, which I should have both of these items pulled and ready to ship soon. Pm returned, Cb

[suville]

I would rather have the later ones, I can wait till you can pull them how much with shipping to 83647 Thanks for your time Steve