anyone near southwest va. interested in a nice driver shape lwb stepside bed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 08-24-2007, 11:11 PM

i am getting me a 71 gmc to use as a work truck . it has a nice driver shape lwb stepside bed on it box is good and soild wood floor is gone and replaced with plywood i think i didn't look at it long . going try to get it home tomarrow. pass. side bed fender looked just about perfect surface rust under neith good green paint on all of it. driver side fender has a couple small dents toward bottom rear of fender and some rust threw where it meets the inner box/bed steps are good and soild ft. gate very good shape. tailgate is not included that is the deal with the way i bought the truck i will be asking $500.00 for the bed . if i can sale it i will put 1 of my wide beds on it if it runs out good.if not i will part it out.

billsbowtie · 08-25-2007, 09:31 PM

heres a few pics. and above i said the floor was gone its not it has very good wood that is covered up with a piece of mining belt.

billsbowtie · 08-25-2007, 09:31 PM

billsbowtie · 08-25-2007, 09:31 PM

billsbowtie · 08-25-2007, 09:46 PM

Tigman · 08-26-2007, 08:38 AM

I'm in Big Stone Gap!! What do you want for the truck?

Mark

**special-K** · 08-26-2007, 08:43 AM

Just a thought:If no one wants it as a longbed,it would be real easy to make a shortbed out of it.

bean · 08-26-2007, 01:48 PM

have you decided yet if you're going to part it out?

billsbowtie · 08-26-2007, 05:59 PM

tigman i would take $1500.00 for it before i tag it. witch is going to be soon i hope. it has a new jasper short block new carb fuel pump wires plugs dis. cap head has been redone cab is soild except floor suports needs 2 or 3 of them. it has been setting about 2 or 3 years under a shed so the gas was bad . i cleaned it out . today i bought new plugs fuel filter and stuff to change oil. i think that will help it alot. let me no if you are interested in it. i was going to sale the bed and put a wide bed on it and use it for a work truck. it says on the title that is only has 67000 act miles .
special-k i was thinking the same thing. it has a super nice pass. fender the hole box is real good for a driver. i was suprized when we put it on the rollback and saw the wood floor from under neith.
bean what parts where you interrested in i have 4 other trucks i am junking out.

billsbowtie · 08-26-2007, 06:15 PM

tigman heres my # if you want to call me 276-346-3426 ask for big bill

billsbowtie · 09-06-2007, 11:04 PM

bed is still f/s

08-24-2007, 11:11 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	anyone near southwest va. interested in a nice driver shape lwb stepside bed? i am getting me a 71 gmc to use as a work truck . it has a nice driver shape lwb stepside bed on it box is good and soild wood floor is gone and replaced with plywood i think i didn't look at it long . going try to get it home tomarrow. pass. side bed fender looked just about perfect surface rust under neith good green paint on all of it. driver side fender has a couple small dents toward bottom rear of fender and some rust threw where it meets the inner box/bed steps are good and soild ft. gate very good shape. tailgate is not included that is the deal with the way i bought the truck i will be asking $500.00 for the bed . if i can sale it i will put 1 of my wide beds on it if it runs out good.if not i will part it out. __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? heres a few pics. and above i said the floor was gone its not it has very good wood that is covered up with a piece of mining belt. __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:31 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-25-2007, 09:46 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? __________________ i have 67/72 chevy truck parts f/s.

08-26-2007, 08:38 AM	#6
Tigman Registered User Join Date: Jul 2007 Location: Big Stone Gap, Va Posts: 84	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? I'm in Big Stone Gap!! What do you want for the truck? Mark

08-26-2007, 08:43 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? Just a thought:If no one wants it as a longbed,it would be real easy to make a shortbed out of it. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 08-26-2007 at 08:45 AM.

08-26-2007, 01:48 PM	#8
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? have you decided yet if you're going to part it out?

08-26-2007, 05:59 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? tigman i would take $1500.00 for it before i tag it. witch is going to be soon i hope. it has a new jasper short block new carb fuel pump wires plugs dis. cap head has been redone cab is soild except floor suports needs 2 or 3 of them. it has been setting about 2 or 3 years under a shed so the gas was bad . i cleaned it out . today i bought new plugs fuel filter and stuff to change oil. i think that will help it alot. let me no if you are interested in it. i was going to sale the bed and put a wide bed on it and use it for a work truck. it says on the title that is only has 67000 act miles . special-k i was thinking the same thing. it has a super nice pass. fender the hole box is real good for a driver. i was suprized when we put it on the rollback and saw the wood floor from under neith. bean what parts where you interrested in i have 4 other trucks i am junking out. __________________ i have 67/72 chevy truck parts f/s.

08-26-2007, 06:15 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? tigman heres my # if you want to call me 276-346-3426 ask for big bill __________________ i have 67/72 chevy truck parts f/s.

09-06-2007, 11:04 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: anyone near southwest va. interested in a nice driver shape lwb stepside bed? bed is still f/s __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.