New Guy in San Jose could use help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SanJosesSteve · 08-08-2007, 06:20 PM

Hello Everyone,
I've been the proud owner of a 59' GMC Stepside for about 15 years now. Gramps bought it brand new and only clocked 92K on it before giving it to me. I've put another 30K on it as a weekend driver. It's bone stock. 270cid, 3 on the tree, and never had so much as a radio installed. (Still has the speake r and head unit blanks installed.) Motor never opened up.
Anyway, it's rear crankshaft seal has been M.I.A. for years now, and has trouble maintaining oil pressure w/o a generous helping of Lucans Oil Stabilizer. Recently I noticed some water in the oil. Changed the head gasket but the problem did not go away. I'm thinking the head may be cracked or worse.
Anyone have a reccomendation for a machine shop in the SF Bay Area? I hate to take it just anywhere. I don't imagine shops see GMC 270 Straight Six's every day.
Any advice appreciated. Thanks -SF

2005 Ford Five Hundred
2000 Jeep Cherokee
1972 Fiat 124 Spider
1959 GMC Stepside

krue · 08-08-2007, 06:36 PM

Welcome to the board from South Mississippi! Hate to hear you're having trouble, may get a quicker/better answer on the 47-59 board, or the West board on the Regions page.

c-mack · 08-08-2007, 07:50 PM

hi, welcome to the boards from east texas.

centsless · 08-08-2007, 08:56 PM

Welcome from MD. I dont have any suggestions on a machine shop for you, but post a question in the message boards and I'm sure someone can help!!

jsbgump · 08-08-2007, 09:21 PM

Welcome to the board from Texas

L0WRIDE · 08-08-2007, 10:15 PM

Welcome to the board

CAL 58 GMC · 08-08-2007, 11:58 PM

Welcome to the board from Central Califorina!

shaneschevys · 08-09-2007, 12:39 AM

Welcome from FT Worth TX.

BACKYARD88 · 08-09-2007, 08:28 AM

from South Texas.

**68SWB4x4** · 08-09-2007, 09:35 AM

Welcome to the board from..... ummmmm a little below San Jose

Anyway a guy I used to know specialized in 55-9 GMCs and lived up in the San Jose area, I'll see if I can't find out if he has parts or knows a good machine shop to use. Might take a bit to get in touch so sorry about that!

86swb · 08-09-2007, 01:07 PM

Welcome to the board from Western Kentucky.

gulfcoast66 · 08-10-2007, 08:57 AM

2 the board

Lugnutt · 08-10-2007, 01:22 PM

Welcome from another San Josean!

If I was in your shoes and wanted to be careful with who touched my truck, I'd pay a little extra and bring it to Speed Merchant on Lincoln near San Carlos. They've been around since I was in high school (long long time ago). They build race engines for both street and strip and so people have higher expectations for their work.

I'm sure there are other good shops out there, but if you can't get another good recommendation, I'm sure these guys will do you right.

Good luck!

LUV2XCLR8 · 08-10-2007, 04:58 PM

From West TN

GREASEMONKEY72 · 08-11-2007, 02:13 AM

WELCOME to the board

**Canadian694x4** · 08-12-2007, 02:42 PM

Welcome To The Boards From The Great White North!

**Ron 586** · 08-16-2007, 03:56 PM

Welcome to the board from West Tennessee.

72armyswbtruck · 08-18-2007, 07:04 AM

Welcome to the best site on the web.

**1971K54X4** · 09-07-2007, 11:38 AM

from Iowa

72BlckButy · 09-07-2007, 01:47 PM

to the board from Mid-MO!!!

08-08-2007, 06:20 PM	#1
SanJosesSteve Registered User Join Date: Aug 2007 Location: San Jose, CA Posts: 46	New Guy in San Jose could use help Hello Everyone, I've been the proud owner of a 59' GMC Stepside for about 15 years now. Gramps bought it brand new and only clocked 92K on it before giving it to me. I've put another 30K on it as a weekend driver. It's bone stock. 270cid, 3 on the tree, and never had so much as a radio installed. (Still has the speake r and head unit blanks installed.) Motor never opened up. Anyway, it's rear crankshaft seal has been M.I.A. for years now, and has trouble maintaining oil pressure w/o a generous helping of Lucans Oil Stabilizer. Recently I noticed some water in the oil. Changed the head gasket but the problem did not go away. I'm thinking the head may be cracked or worse. Anyone have a reccomendation for a machine shop in the SF Bay Area? I hate to take it just anywhere. I don't imagine shops see GMC 270 Straight Six's every day. Any advice appreciated. Thanks -SF 2005 Ford Five Hundred 2000 Jeep Cherokee 1972 Fiat 124 Spider 1959 GMC Stepside

08-08-2007, 06:36 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: New Guy in San Jose could use help Welcome to the board from South Mississippi! Hate to hear you're having trouble, may get a quicker/better answer on the 47-59 board, or the West board on the Regions page. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

08-08-2007, 07:50 PM	#3
c-mack Registered User Join Date: May 2007 Location: Crockett, Texas Posts: 581	Re: New Guy in San Jose could use help hi, welcome to the boards from east texas. __________________ 1967 chevy truck 350 V8 1973 VW Transporter/Hippy Bus 1964 VW Baja Bug "When the power of love overcomes the love of power the world will know peace"- Jimi Hendrix

08-08-2007, 08:56 PM	#4
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: New Guy in San Jose could use help Welcome from MD. I dont have any suggestions on a machine shop for you, but post a question in the message boards and I'm sure someone can help!! __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board

08-08-2007, 09:21 PM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: New Guy in San Jose could use help Welcome to the board from Texas __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

08-08-2007, 10:15 PM	#6
L0WRIDE Registered User Join Date: Jan 2005 Location: AUCKLAND, NEW ZEALAND Posts: 2,166	Re: New Guy in San Jose could use help Welcome to the board __________________ 49 CHEVROLET 1/2 TON, 52 CHEVROLET SEDAN 62 HARDTOP NOVA 65 CHEVROLET BB LWB FLEETSIDE 90 CHEVROLET EXTRA CAB CHEVY ONLY - NZ Chapter http://67-72chevytrucks.com/vboard/s...d.php?t=137984

08-08-2007, 11:58 PM	#7
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: New Guy in San Jose could use help Welcome to the board from Central Califorina! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

08-09-2007, 12:39 AM	#8
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: New Guy in San Jose could use help Welcome from FT Worth TX. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

08-09-2007, 08:28 AM	#9
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: New Guy in San Jose could use help from South Texas. __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

08-09-2007, 09:35 AM	#10
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	Re: New Guy in San Jose could use help Welcome to the board from..... ummmmm a little below San Jose Anyway a guy I used to know specialized in 55-9 GMCs and lived up in the San Jose area, I'll see if I can't find out if he has parts or knows a good machine shop to use. Might take a bit to get in touch so sorry about that! __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

08-09-2007, 01:07 PM	#11
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: New Guy in San Jose could use help Welcome to the board from Western Kentucky. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

08-10-2007, 08:57 AM	#12
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: New Guy in San Jose could use help 2 the board __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

08-10-2007, 01:22 PM	#13
Lugnutt Registered User Join Date: Jan 2007 Location: San Jose, California Posts: 194	Re: New Guy in San Jose could use help Welcome from another San Josean! If I was in your shoes and wanted to be careful with who touched my truck, I'd pay a little extra and bring it to Speed Merchant on Lincoln near San Carlos. They've been around since I was in high school (long long time ago). They build race engines for both street and strip and so people have higher expectations for their work. I'm sure there are other good shops out there, but if you can't get another good recommendation, I'm sure these guys will do you right. Good luck!

08-10-2007, 04:58 PM	#14
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: New Guy in San Jose could use help From West TN __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-11-2007, 02:13 AM	#15
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: New Guy in San Jose could use help WELCOME to the board __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME



Register or Log In To remove these advertisements.

08-12-2007, 02:42 PM	#16
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: New Guy in San Jose could use help Welcome To The Boards From The Great White North! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

08-16-2007, 03:56 PM	#17
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: New Guy in San Jose could use help Welcome to the board from West Tennessee. __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket

08-18-2007, 07:04 AM	#18
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: New Guy in San Jose could use help Welcome to the best site on the web. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

09-07-2007, 11:38 AM	#19
1971K54X4 Member Join Date: Jan 2007 Location: Manchester, Iowa Posts: 1,493	Re: New Guy in San Jose could use help from Iowa __________________ Korey 1955 Bel Air 2 door hardtop 1971 Blazer 4x4 1973 Z-28 Prostreet

09-07-2007, 01:47 PM	#20
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: New Guy in San Jose could use help to the board from Mid-MO!!! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

Register or Log In To remove these advertisements.