2wd to 4x4 will it work? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stepside65 · 09-09-2007, 08:53 PM

Will 79 spring hangers,rear axle,front axle,motor and t-case crossmembers work on my 65 chassis? Thanks in advance for any information.

67-72williso · 09-09-2007, 09:31 PM

Anything can be made to work,if you have the skill, time and money. What you are looking at there will take a good bit of each unless you would settle for a half a?s job. Hope that helps.
Later, Willis

**jamie72** · 09-09-2007, 10:10 PM

i agree with williso, but imo its just too much work to make a 2wd into a 4wd, i have heard the 60-66 frames have the same body mounts measurements, so you body would bolt to a 4wd frame. thats the only way i would do it.
good luck

1969k10stepside · 09-09-2007, 10:24 PM

Well,If you dont feel like adding that to your current frame you might could talk me into letting the '69 K20 go so I can hurry up and get the 72 short 4wd GMC home..You might decide the looks of the 67-72s look better and keep it as that instead of a 65 body on it..

Stepside65 · 09-09-2007, 11:44 PM

I'd love to have a 67-72. Who knows? Maybe one day.

09-09-2007, 08:53 PM	#1
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	2wd to 4x4 will it work? Will 79 spring hangers,rear axle,front axle,motor and t-case crossmembers work on my 65 chassis? Thanks in advance for any information. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor

09-09-2007, 09:31 PM	#2
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: 2wd to 4x4 will it work? Anything can be made to work,if you have the skill, time and money. What you are looking at there will take a good bit of each unless you would settle for a half a?s job. Hope that helps. Later, Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

09-09-2007, 10:10 PM	#3
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: 2wd to 4x4 will it work? i agree with williso, but imo its just too much work to make a 2wd into a 4wd, i have heard the 60-66 frames have the same body mounts measurements, so you body would bolt to a 4wd frame. thats the only way i would do it. good luck __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

09-09-2007, 10:24 PM	#4
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: 2wd to 4x4 will it work? Well,If you dont feel like adding that to your current frame you might could talk me into letting the '69 K20 go so I can hurry up and get the 72 short 4wd GMC home..You might decide the looks of the 67-72s look better and keep it as that instead of a 65 body on it.. Last edited by 1969k10stepside; 09-09-2007 at 10:25 PM.

09-09-2007, 11:44 PM	#5
Stepside65 Still Truckless! Join Date: Jul 2007 Location: Valrico, Florida Posts: 3,166	Re: 2wd to 4x4 will it work? I'd love to have a 67-72. Who knows? Maybe one day. __________________ ~James Truckless 2009 Hyundai Sonata<~~Wife's sedanomatic 1997 Nissan Pickup Father-in-law's tonka toy I am forced to drive Founder of The 60-66 Club Tutor Et Ultor



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.