1967 SWB stepper in NE AZ!! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toomanytoyz · 08-24-2007, 06:37 AM

Mike,

Have u Gotten the Check yet?

Thanks, Rick

70rs/ss · 08-24-2007, 12:47 PM

Yep, and for "REAL" it is sold this time!! Keep your eyes open for a build thread. toomanytoys is funding the completion (not show type, but real world driver) I will do the work and deliver it to him in early December. Look for it to begin in about a week, I need to clear out a spot in my garage so I can get the truck in there and spend my evenings/weekends in there with it!! BTW, the 67 short fleet 4X4 in my siggy is ready to roll!!! Any takers?!

jorgensensc · 08-24-2007, 01:27 PM

Awesome! Now when I'm wrenchin on mine at night, I'll think of you and I'll know I'm not alone! HA HA!!

70rs/ss · 08-24-2007, 01:40 PM

Hey, Shawn how is my other stepper? Here is the color I am thinking this one will end up? I hope it links: Heck there are lots of options for red!! toomanytoys pick your favorite and it will be done!!

jorgensensc · 08-24-2007, 01:49 PM

Nice color! Your other baby is sitting in pieces, with the engine out getting fresh paint. Not for any real reason other than I just can't leave things alone. She was running great when I took the motor out, now I just have to hope she still runs great when I put it back in. She is also wanting a facelift to the '68 model, but finding the fenders and hood is getting kinda hard and pricey for nice ones, you know I hate rust, that's why I came all the way out there to get her to begin with, no rust... I'll look for the build thread!
Shawn

toomanytoyz · 08-24-2007, 02:49 PM

What Color is the one Attached? I'm Kinda Partial to the Corvette Red, That's the Color of My Nomad............

Rick

toomanytoyz · 08-25-2007, 09:52 PM

Mike,
Just wanted to let you know some stuff will be coming your way soon, Just Today won a set of 5" Drop Coils for the Rear & also got a set of nice Valve Covers from another Board Member to Ship to Ya..........

Will Need to Find a set of 3 " Drop for the Front...........

Thanks, Rick

70rs/ss · 08-25-2007, 09:55 PM

Sweet. As for the color, I'd go to a paint shop and verify the colors cause I have heard the paint chip colors vary from the actual color? I have a spot in the garage cleared out so work can start in earnest next weekend.

toomanytoyz · 08-26-2007, 02:23 PM

Mike,

The Valve cover set & Drop Coils should be mailed to the addy you Provided, let me know when you get them.................

Rick

70rs/ss · 08-26-2007, 09:53 PM

cool. I am steadily gathering pieces. When I get it home I can blow it apart and get to work. Do you want me to just replace stuff as needed and supply you with receipts? It'll save you shipping costs? PM me.

Mike

***Liz*** · 08-27-2007, 11:02 PM

Please keep all trucks for sale in the trucks for sale area, thanks http://67-72chevytrucks.com/vboard/c...ndex.php?cat=8

I know this is a bit afterthought on this thread, bein yall did the deal etc.. just being fair in the postings

good luck with the projects guys

toomanytoyz · 08-31-2007, 09:19 AM

This is Called Hot Rod Red, Really Look's Good.................

This Would be worth Considering, The Chrome Really Seem's to Make That Pop out at You..........

Rick

70rs/ss · 08-31-2007, 01:13 PM

Looks good, I think that flat anodized color looks sweet!! I am excited to get this thing into paint. I am trying to keep from getting attached to it, especially after the paint goes on!!

toomanytoyz · 09-04-2007, 09:35 PM

Mike,

Won a set of 3" Front Drop Spring's off the Evil i will be sending your way, So Yes I will want you to Replace whatever need's it on the Front end when doing the Drop.

I guess all i need to complete the Drop will be Shock's & a Adjustable Panhard Bar, Is That Right? I Think i want that Hot Rod Red Flatz Paint as Long as we come up with Shiny Pc's for the Front Grill, That Really Make's that Paint Pop on That S10 Pic..................

Thanks, Rick

70rs/ss · 09-04-2007, 10:57 PM

Yep and I have a deal for you! PM me!! I am thinking of tossing the disc set-up off of my 2wd Blazer (see my new toy thread on the Blazer board). I'll clean it up and new pads etc so you can have 5-lug and disc brakes? LMK in a PM

Mike

PS on the parts above, yep that'll do it!! The shiney aluminum grill pieces can be bought new. Any word on needing the big back window? I have a line on one if you want/need it?

70rs/ss · 09-10-2007, 12:30 AM

Picts of the new bed, it is very straight, but the inner fenders have been cut out. The fenders are really nice, so I will use them and we need to decide what you can live with. Once we agree on what to use I can begin the sanding, primer, sanding, primer, paint, paint etc etc!!!

70rs/ss · 09-10-2007, 12:36 AM

Here are some more picts, the tailgate is a new leterless gate. It is perfect and straight!! I am beginning to wish this was going to be for me when it's done!! Paint is in the very near future, that's the kind of body work I like, buy perfect straight rust free metal and then scuff and paint!! Repop or perfect OEm is the only way to go!! Gotta love AZ!!

70rs/ss · 09-10-2007, 01:18 AM

http://67-72chevytrucks.com/vboard/s...34#post2350934

To save any hassle, and confusion, I have started a build thread titled "PHOENIX" and the link above takes you there. Watch as I try to build my dream truck for someone else!! I will enjoy evey minutr of the build except when I hand over the keys!!

08-24-2007, 06:37 AM	#51
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! Mike, Have u Gotten the Check yet? Thanks, Rick

08-24-2007, 12:47 PM	#52
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Yep, and for "REAL" it is sold this time!! Keep your eyes open for a build thread. toomanytoys is funding the completion (not show type, but real world driver) I will do the work and deliver it to him in early December. Look for it to begin in about a week, I need to clear out a spot in my garage so I can get the truck in there and spend my evenings/weekends in there with it!! BTW, the 67 short fleet 4X4 in my siggy is ready to roll!!! Any takers?! Last edited by 70rs/ss; 08-24-2007 at 12:48 PM.

08-24-2007, 01:27 PM	#53
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 1967 SWB stepper in NE AZ!! Awesome! Now when I'm wrenchin on mine at night, I'll think of you and I'll know I'm not alone! HA HA!! __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

08-24-2007, 01:49 PM	#55
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 1967 SWB stepper in NE AZ!! Nice color! Your other baby is sitting in pieces, with the engine out getting fresh paint. Not for any real reason other than I just can't leave things alone. She was running great when I took the motor out, now I just have to hope she still runs great when I put it back in. She is also wanting a facelift to the '68 model, but finding the fenders and hood is getting kinda hard and pricey for nice ones, you know I hate rust, that's why I came all the way out there to get her to begin with, no rust... I'll look for the build thread! Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

08-24-2007, 02:49 PM	#56
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! What Color is the one Attached? I'm Kinda Partial to the Corvette Red, That's the Color of My Nomad............ Rick

08-25-2007, 09:52 PM	#57
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! Mike, Just wanted to let you know some stuff will be coming your way soon, Just Today won a set of 5" Drop Coils for the Rear & also got a set of nice Valve Covers from another Board Member to Ship to Ya.......... Will Need to Find a set of 3 " Drop for the Front........... Thanks, Rick

08-25-2007, 09:55 PM	#58
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Sweet. As for the color, I'd go to a paint shop and verify the colors cause I have heard the paint chip colors vary from the actual color? I have a spot in the garage cleared out so work can start in earnest next weekend. Last edited by 70rs/ss; 09-10-2007 at 12:56 AM.

08-26-2007, 02:23 PM	#59
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! Mike, The Valve cover set & Drop Coils should be mailed to the addy you Provided, let me know when you get them................. Rick Attached Images Last edited by toomanytoyz; 08-26-2007 at 02:27 PM.

08-26-2007, 09:53 PM	#60
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! cool. I am steadily gathering pieces. When I get it home I can blow it apart and get to work. Do you want me to just replace stuff as needed and supply you with receipts? It'll save you shipping costs? PM me. Mike

08-27-2007, 11:02 PM	#61
*Liz* Catchy title goes here.. Join Date: Mar 2002 Location: Rockwell, NC Posts: 39,821	Re: 1967 SWB stepper in NE AZ!! Please keep all trucks for sale in the trucks for sale area, thanks http://67-72chevytrucks.com/vboard/c...ndex.php?cat=8 I know this is a bit afterthought on this thread, bein yall did the deal etc.. just being fair in the postings good luck with the projects guys

08-31-2007, 09:19 AM	#62
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! This is Called Hot Rod Red, Really Look's Good................. This Would be worth Considering, The Chrome Really Seem's to Make That Pop out at You.......... Rick Attached Images Last edited by toomanytoyz; 08-31-2007 at 11:02 AM.

08-31-2007, 01:13 PM	#63
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Looks good, I think that flat anodized color looks sweet!! I am excited to get this thing into paint. I am trying to keep from getting attached to it, especially after the paint goes on!!

09-04-2007, 09:35 PM	#64
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: 1967 SWB stepper in NE AZ!! Mike, Won a set of 3" Front Drop Spring's off the Evil i will be sending your way, So Yes I will want you to Replace whatever need's it on the Front end when doing the Drop. I guess all i need to complete the Drop will be Shock's & a Adjustable Panhard Bar, Is That Right? I Think i want that Hot Rod Red Flatz Paint as Long as we come up with Shiny Pc's for the Front Grill, That Really Make's that Paint Pop on That S10 Pic.................. Thanks, Rick Attached Images Last edited by toomanytoyz; 09-04-2007 at 09:45 PM.

09-04-2007, 10:57 PM	#65
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Yep and I have a deal for you! PM me!! I am thinking of tossing the disc set-up off of my 2wd Blazer (see my new toy thread on the Blazer board). I'll clean it up and new pads etc so you can have 5-lug and disc brakes? LMK in a PM Mike PS on the parts above, yep that'll do it!! The shiney aluminum grill pieces can be bought new. Any word on needing the big back window? I have a line on one if you want/need it?

09-10-2007, 12:30 AM	#66
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Picts of the new bed, it is very straight, but the inner fenders have been cut out. The fenders are really nice, so I will use them and we need to decide what you can live with. Once we agree on what to use I can begin the sanding, primer, sanding, primer, paint, paint etc etc!!! Attached Images



Register or Log In To remove these advertisements.

09-10-2007, 12:36 AM	#67
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! Here are some more picts, the tailgate is a new leterless gate. It is perfect and straight!! I am beginning to wish this was going to be for me when it's done!! Paint is in the very near future, that's the kind of body work I like, buy perfect straight rust free metal and then scuff and paint!! Repop or perfect OEm is the only way to go!! Gotta love AZ!! Attached Images

09-10-2007, 01:18 AM	#68
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,270	Re: 1967 SWB stepper in NE AZ!! http://67-72chevytrucks.com/vboard/s...34#post2350934 To save any hassle, and confusion, I have started a build thread titled "PHOENIX" and the link above takes you there. Watch as I try to build my dream truck for someone else!! I will enjoy evey minutr of the build except when I hand over the keys!!

Register or Log In To remove these advertisements.