Looking for info: 66 body on a 73-87 frame? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Mach1 · 09-10-2007, 11:29 PM

Like title says, I ahve a friend I just sold him my 86 parts frame so he can do his front disc brake conversion on his 66. He has asked me if it is possible to swap his body onto the newer frame.

My reply was t hat any thing was possible.

But has it been done and what would it take is all he asked.

Can anyone with experience in this let me know? Is there a previous thread I can be refered to?

thanks,
Thomas

Longhorn Man · 09-11-2007, 12:11 AM

I would double check with the guys on the 60 - 66 board, bu tI think the wheel base id onger on the new one, and the frame isn't flat on the new one like the old body needs.

67Mach1 · 09-11-2007, 07:13 AM

Quote:

Originally Posted by Longhorn Man

I would double check with the guys on the 60 - 66 board, bu tI think the wheel base id onger on the new one, and the frame isn't flat on the new one like the old body needs.

I was pretty sure about the frame shape but not sure about WB.

I'll ask over there. Thanks.

Thomas

**special-K** · 09-11-2007, 07:19 AM

Try the 60-66 board since it doesn`t have anything to do with 67-72s,anyway.Maybe the body forum?

67Mach1 · 09-11-2007, 08:14 AM

Quote:

Originally Posted by special-K

Try the 60-66 board since it doesn`t have anything to do with 67-72s,anyway.Maybe the body forum?

s-K sorry to have this in the wrong section.... I don't have a 60-66 so this is the forum I usually am on. I have already posted it on the other one per LHM suggestion.

Regards,

09-10-2007, 11:29 PM	#1
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Looking for info: 66 body on a 73-87 frame? Like title says, I ahve a friend I just sold him my 86 parts frame so he can do his front disc brake conversion on his 66. He has asked me if it is possible to swap his body onto the newer frame. My reply was t hat any thing was possible. But has it been done and what would it take is all he asked. Can anyone with experience in this let me know? Is there a previous thread I can be refered to? thanks, Thomas __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale

09-11-2007, 12:11 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Looking for info: 66 body on a 73-87 frame? I would double check with the guys on the 60 - 66 board, bu tI think the wheel base id onger on the new one, and the frame isn't flat on the new one like the old body needs.

09-11-2007, 07:19 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Looking for info: 66 body on a 73-87 frame? Try the 60-66 board since it doesn`t have anything to do with 67-72s,anyway.Maybe the body forum? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.