towhook id & value - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 09-14-2007, 11:03 PM

these are on a 71 blazer can anyone tell me if they are orig. and what they are worth? thanks for any help.

1969k10stepside · 09-14-2007, 11:17 PM

Not original..not worth much..$15 maybe? What else you selling from that blazer?

billsbowtie · 09-14-2007, 11:33 PM

i am just checking on it right now . it has a 400 sb that i was thinking of getting for my project. if i get it i am useing the eng. trans. linkage power brake setup, power steering set up, alt. brackets. it has a rough body but is supose to have good running gears auto trans. transfer case ft. and rear end. maybe a few body parts. it has a good looking back seat and pass. side ft. bucket driver side is wore but they have been redone at some point. brackets look right but ft. seats look a little wider than orig.

1969k10stepside · 09-14-2007, 11:37 PM

Bill,it may have utility bucket seats which were different (wider) than regular truck buckets.They have a metal back on them where the others had plastic back covers on the blazer/jimmy models.I assume you know the tranny is different as is the tranny linkages on a 4wd...I'd like to buy some parts from it if you do part it out...

billsbowtie · 09-14-2007, 11:47 PM

i was thinking the frame bracket auto trans. that is was the same as a bb 2wd. i have had bb trucks with bb linkage 1 had a 350 trans and 1 had a 400 trans. it looked like everything was working good. are the utility buckets worth as much as the other orig buckets?

1969k10stepside · 09-14-2007, 11:51 PM

Yes,frame bracket should be the same..the linkage from the column to the tranny is the 4wd specific part..The utility ones arent worth as much but are still worth $100-$250 but I think they are more comfortable than the regular truck buckets in my 71...Put me inline for the front driveshaft and some other misc parts if you do get it...

billsbowtie · 09-15-2007, 12:29 AM

ok do you have and ideal of what you good use off of it. i am just trying to get and ideal of how fast i could get part of my money back . because cash is short but i can use alot of the parts myself. i am not in a hurry for the parts but when i do need them they may not be there.

1969k10stepside · 09-15-2007, 12:32 PM

Bill,I could use the front driveshaft,the rod that goes from the column down to the tranny if you dont use it,the metal piece that goes between the tailgate and hatch if it's good,rear seatbelts,the plastic caps that go on top of the door up against the top,front bumper brackets,and some other stuff if I can think of it...

**Classic Bowties** · 09-15-2007, 05:52 PM

Quote:

Originally Posted by billsbowtie

i was thinking the frame bracket auto trans. that is was the same as a bb 2wd. i have had bb trucks with bb linkage 1 had a 350 trans and 1 had a 400 trans. it looked like everything was working good. are the utility buckets worth as much as the other orig buckets?

Hi Bill, I just thought I would confirm that the 2wd BBC/Th400 trans link. frame pivot is different then the 4wd only frame pivot. I hope the pics help, the 2wd BBC/Th400 setup is the upper one in pics and the 4wd setup is the lower one. Cb

72freak · 09-15-2007, 08:44 PM

Quote:

Originally Posted by 1969k10stepside

Not original..not worth much..$15 maybe? What else you selling from that blazer?

$15 new at Northern

billsbowtie · 09-15-2007, 10:55 PM

pics help alot . thanks

09-14-2007, 11:03 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	towhook id & value these are on a 71 blazer can anyone tell me if they are orig. and what they are worth? thanks for any help. __________________ i have 67/72 chevy truck parts f/s.

09-14-2007, 11:17 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: towhook id & value Not original..not worth much..$15 maybe? What else you selling from that blazer? Last edited by 1969k10stepside; 09-14-2007 at 11:18 PM.

09-14-2007, 11:33 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: towhook id & value i am just checking on it right now . it has a 400 sb that i was thinking of getting for my project. if i get it i am useing the eng. trans. linkage power brake setup, power steering set up, alt. brackets. it has a rough body but is supose to have good running gears auto trans. transfer case ft. and rear end. maybe a few body parts. it has a good looking back seat and pass. side ft. bucket driver side is wore but they have been redone at some point. brackets look right but ft. seats look a little wider than orig. __________________ i have 67/72 chevy truck parts f/s.

09-14-2007, 11:37 PM	#4
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: towhook id & value Bill,it may have utility bucket seats which were different (wider) than regular truck buckets.They have a metal back on them where the others had plastic back covers on the blazer/jimmy models.I assume you know the tranny is different as is the tranny linkages on a 4wd...I'd like to buy some parts from it if you do part it out... Last edited by 1969k10stepside; 09-14-2007 at 11:37 PM.

09-14-2007, 11:47 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: towhook id & value i was thinking the frame bracket auto trans. that is was the same as a bb 2wd. i have had bb trucks with bb linkage 1 had a 350 trans and 1 had a 400 trans. it looked like everything was working good. are the utility buckets worth as much as the other orig buckets? __________________ i have 67/72 chevy truck parts f/s.

09-14-2007, 11:51 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: towhook id & value Yes,frame bracket should be the same..the linkage from the column to the tranny is the 4wd specific part..The utility ones arent worth as much but are still worth $100-$250 but I think they are more comfortable than the regular truck buckets in my 71...Put me inline for the front driveshaft and some other misc parts if you do get it...

09-15-2007, 12:29 AM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: towhook id & value ok do you have and ideal of what you good use off of it. i am just trying to get and ideal of how fast i could get part of my money back . because cash is short but i can use alot of the parts myself. i am not in a hurry for the parts but when i do need them they may not be there. __________________ i have 67/72 chevy truck parts f/s.

09-15-2007, 12:32 PM	#8
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: towhook id & value Bill,I could use the front driveshaft,the rod that goes from the column down to the tranny if you dont use it,the metal piece that goes between the tailgate and hatch if it's good,rear seatbelts,the plastic caps that go on top of the door up against the top,front bumper brackets,and some other stuff if I can think of it...

09-15-2007, 10:55 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: towhook id & value pics help alot . thanks __________________ i have 67/72 chevy truck parts f/s.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.