WTT or WTB:14-bolt/4.10 for my 3.73 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 08-23-2007, 08:55 PM

Here it is...
My`92 K3500 SRW has 4.10s and there`s a problem with the rear.I have the 3.73 rear from my`95 that I totalled that I`m ready to install and change-out the gears from the 4.10.I`m wondering if there`s someone within striking distance with a truck or just a rear with 4.10s that might be considering going to 3.73s.I`d swap 3.73s into my front,but I think I need to stay with what I have for my marine-prepped 6.5TD to run right.It likes higher rpms with no wastegate and a higher output injector pump(& medium duty turbo).I also run 255/85s which are about 33 inches tall in a heavy truck(Reading work topper full of tools inside and out).She blows the black smoke below 2,000 rpm.So,that`s where I`m at and why I need to swap.The 3.73 rear from the`95 has 120,000 miles and was in a truck that I bought used @ 50,000 miles and babied.I garauntee there will be no problems with this rear.I`ll be putting it in my`92 if I find no takers or a deal on a 4.10.
Prolly a pm would be best since I may not check here too often...Thanks

**special-K** · 09-01-2007, 06:45 AM

Any 4.10 rears out there to bolt in an`88-up?

Jim P · 09-02-2007, 11:50 AM

A friend of mine HAD one for sale. 4.10, no posi. He was asking $750.00 I can find out if he still has it, and all the details if you are interested.

Jim

**special-K** · 09-13-2007, 09:07 PM

No thanks.I`d never pay that much to be honest.He should reconsider his price if he wants to sell it to anyone at all.They go for around $300.

**jamie72** · 09-17-2007, 09:02 PM

Tim if you were closer i`m sure i could find what you need, i got 2- 14 bolts here.
i can usally buy them for 150.00 or so...

jeffspower · 09-17-2007, 09:23 PM

My '88 came with a 4:10 70HD. I bought a '98 4:10 14 bolt, put in new 3.21's & stuck it in. Too bad you are so far away- I still have the 70HD.

**special-K** · 09-18-2007, 06:29 AM

I haven`t even checked locally.I`m sure they`d get me one quick if one wasn`t in their yard for some reason.Not a rare part.I just hoped to hook up a trade to scratch someone else`s back.Eeew!Does that expression feel wierd to say to anyone else?(unless it`s a woman,of course).

08-23-2007, 08:55 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	WTB or WTT:14-bolt/4.10 for my 3.73 Here it is... My`92 K3500 SRW has 4.10s and there`s a problem with the rear.I have the 3.73 rear from my`95 that I totalled that I`m ready to install and change-out the gears from the 4.10.I`m wondering if there`s someone within striking distance with a truck or just a rear with 4.10s that might be considering going to 3.73s.I`d swap 3.73s into my front,but I think I need to stay with what I have for my marine-prepped 6.5TD to run right.It likes higher rpms with no wastegate and a higher output injector pump(& medium duty turbo).I also run 255/85s which are about 33 inches tall in a heavy truck(Reading work topper full of tools inside and out).She blows the black smoke below 2,000 rpm.So,that`s where I`m at and why I need to swap.The 3.73 rear from the`95 has 120,000 miles and was in a truck that I bought used @ 50,000 miles and babied.I garauntee there will be no problems with this rear.I`ll be putting it in my`92 if I find no takers or a deal on a 4.10. Prolly a pm would be best since I may not check here too often...Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-01-2007 at 06:45 AM.

09-01-2007, 06:45 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: WTT or WTB:14-bolt/4.10 for my 3.73 Any 4.10 rears out there to bolt in an`88-up? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-02-2007, 11:50 AM	#3
Jim P Registered User Join Date: May 2004 Location: Lake Hopatcong, NJ Posts: 5	Re: WTT or WTB:14-bolt/4.10 for my 3.73 A friend of mine HAD one for sale. 4.10, no posi. He was asking $750.00 I can find out if he still has it, and all the details if you are interested. Jim

09-13-2007, 09:07 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: WTT or WTB:14-bolt/4.10 for my 3.73 No thanks.I`d never pay that much to be honest.He should reconsider his price if he wants to sell it to anyone at all.They go for around $300. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-17-2007, 09:02 PM	#5
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,839	Re: WTT or WTB:14-bolt/4.10 for my 3.73 Tim if you were closer i`m sure i could find what you need, i got 2- 14 bolts here. i can usally buy them for 150.00 or so... __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

09-17-2007, 09:23 PM	#6
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: WTT or WTB:14-bolt/4.10 for my 3.73 My '88 came with a 4:10 70HD. I bought a '98 4:10 14 bolt, put in new 3.21's & stuck it in. Too bad you are so far away- I still have the 70HD. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

09-18-2007, 06:29 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: WTT or WTB:14-bolt/4.10 for my 3.73 I haven`t even checked locally.I`m sure they`d get me one quick if one wasn`t in their yard for some reason.Not a rare part.I just hoped to hook up a trade to scratch someone else`s back.Eeew!Does that expression feel wierd to say to anyone else?(unless it`s a woman,of course). __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.