|
09-22-2007, 03:15 PM
|
#1 |
|
Registered User
Join Date: Apr 2007
Location: Edmonton, AB, CAN
Posts: 346
|
Taking the bed apart?
So I have limited space, and manpower, so i cant really just undo the bed to frame mounts and lift it off, is there anyway i can take it apart panel by panel? and i cant get the huge phillips screws out at the front of the bed, any help with that?
|
|
|
|
09-22-2007, 03:17 PM
|
#2 |
|
Registered User
Join Date: Mar 2006
Location: USA
Posts: 21,020
|
Re: Taking the bed apart?
Unbolt the bed from the frame and move it back so you can have access to the front bolts.For the phillips screws,my cordless drill got them out.You will need to get the spotwelds off at the tailgate end that hold the floor to the sides but other then that it's just removing bolts.I've found with a impact just tighten them till they break as it's a PITA to unbolt them.
|
|
|
|
|
09-22-2007, 05:04 PM
|
#3 |
|
Sisyphus was my mentor!
 
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
Re: Taking the bed apart?
i heated the phillips screws to red hot with my torch & while they where still hot they just threaded out easily... 1969k10stepside is right, just break off the side bolts or cut them off.
__________________
passthebuck  #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
|
09-22-2007, 05:52 PM
|
#4 |
|
Junior Member
Join Date: Jan 2007
Location: Dallas, TX
Posts: 246
|
Re: Taking the bed apart?
1/4" thick cut off wheel.... i just ground one down until the phillips head fell off.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
