wheel cylinder part 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

salazar44 · 09-25-2007, 10:19 PM

So I had to special order my new wheel cylinders. I got them and comparing the old with the new and the new ones are slightly larger. I bolted them in and they seem to fit. They are a bit snug with the rubber boot against the backing plate a bit.

Do you think this is an issue? Anyone have a part number to suggest?

This is what I have Raymold (Raybestos) Part Number: 2037026/right, 2037025/left

Part Number: 2037026
Inlet Thread Size: 7/16-20 IN
Bore Diameter: 1 1/8 IN
Material Type: Cast Iron
Grade: STANDARD
Sub Brand: RAYMOLD
Type: Wheel Cylinders

Dadsredwagon · 09-25-2007, 11:15 PM

i'm getting ready to replace mine as well, but noticed the old one are close to the backing plate as well, what size socket was used to remove them
(assuming the front ones)

thx

salazar44 · 09-25-2007, 11:26 PM

I just used a big adjustable wrench. They came out pretty easily. I guess I was lucky my threads were smooth and silky!

Let me know what brand and part number you get please! and also if the rubber boot is tight up against the backing plate. Thanks.

hewlett2002000 · 09-26-2007, 04:32 AM

i got my rear wheel cylinders at autozone. i dont have the part number anymore. i got everything to replace all the rear brake parts at autozone. just thought id let yall know.
John

09-25-2007, 10:19 PM	#1
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	wheel cylinder part 2 So I had to special order my new wheel cylinders. I got them and comparing the old with the new and the new ones are slightly larger. I bolted them in and they seem to fit. They are a bit snug with the rubber boot against the backing plate a bit. Do you think this is an issue? Anyone have a part number to suggest? This is what I have Raymold (Raybestos) Part Number: 2037026/right, 2037025/left Part Number: 2037026 Inlet Thread Size: 7/16-20 IN Bore Diameter: 1 1/8 IN Material Type: Cast Iron Grade: STANDARD Sub Brand: RAYMOLD Type: Wheel Cylinders __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com Last edited by salazar44; 09-25-2007 at 10:20 PM.

09-25-2007, 11:15 PM	#2
Dadsredwagon Registered User Join Date: Aug 2006 Location: Spring,TX Posts: 342	Re: wheel cylinder part 2 i'm getting ready to replace mine as well, but noticed the old one are close to the backing plate as well, what size socket was used to remove them (assuming the front ones) thx

09-25-2007, 11:26 PM	#3
salazar44 65 - Chevy C10 Join Date: Jun 2006 Location: Los Angeles, CA Posts: 625	Re: wheel cylinder part 2 I just used a big adjustable wrench. They came out pretty easily. I guess I was lucky my threads were smooth and silky! Let me know what brand and part number you get please! and also if the rubber boot is tight up against the backing plate. Thanks. __________________ VIC One Repair Leads to Another! http://vix65chevyc10.blogspot.com

09-26-2007, 04:32 AM	#4
hewlett2002000 Registered User Join Date: Dec 2006 Location: Cleveland, Tx Posts: 1,619	Re: wheel cylinder part 2 i got my rear wheel cylinders at autozone. i dont have the part number anymore. i got everything to replace all the rear brake parts at autozone. just thought id let yall know. John __________________ Respect: 1. A feeling of appreciative, often deferential regard; esteem. 2. The state of being regarded with honor or esteem. 3. Willingness to show consideration or appreciation. When you fail to show consideration to others values you are showing disrespect.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.