attn: 67 and 68 owners - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dan468 · 10-01-2007, 07:23 PM

Need Pictures of the radiator support mounts that are on the frame. Possibility that mine might have been hole cut to accomadate different mounts. Any pictures of virgin mounts will do me wonders.

Thanks guys,
Dan

PanelDeland · 10-01-2007, 08:22 PM

If you are changing the rubber mounts with a cab mount kit that also contains the radiator supports and it doesn't look like it fits or causes alignment issues with the front end you possibly got a kit that has 69-72 radiator supports mounts.I know the kits say 67-72 but the rad sup mounts are different.
Just a thought on why you are asking.

SacramentoJoe · 10-01-2007, 08:36 PM

Here are the left and right side of my '68.

Don't mind the dirt, I had some fun last weekend. The other stuff is what I call "surface rust"

dan468 · 10-01-2007, 09:12 PM

Quote:

Originally Posted by PanelDeland

If you are changing the rubber mounts with a cab mount kit that also contains the radiator supports and it doesn't look like it fits or causes alignment issues with the front end you possibly got a kit that has 69-72 radiator supports mounts.I know the kits say 67-72 but the rad sup mounts are different.
Just a thought on why you are asking.

thank you both. As the kit being bad or the wrong one, I'm finally past that nightmare (thanks board and brother's trucks). The holes just seem like they have been made bigger like the PO already made that mistake.

Thanks for the pics but I need a pic of the hold on the mount W/O the assembly. I am curious as to the size of the hole.

thanks again

dan468 · 10-02-2007, 03:24 PM

ttt

shifty · 10-02-2007, 05:16 PM

top view:

http://satellitehead.com/images/68ch...teering002.jpg

http://satellitehead.com/images/68ch...teering001.jpg

Of course, the tab with the large half-dollar sized hole is the support I think you're asking about.

Hope that does you wonders

If not, check out my gallery and look for more pics (it's running a tad slow right now for some reason): http://satellitehead.com/gallery

dan468 · 10-02-2007, 10:16 PM

Quote:

Originally Posted by shifty

top view:

http://satellitehead.com/images/68ch...teering002.jpg

http://satellitehead.com/images/68ch...teering001.jpg

Of course, the tab with the large half-dollar sized hole is the support I think you're asking about.

Hope that does you wonders

If not, check out my gallery and look for more pics (it's running a tad slow right now for some reason): http://satellitehead.com/gallery

Shift here's a question...If a bolt is the the only thing to pass through why is the hole so big? the 67 and 68 mounts don't have a raised portion the the rubber mount like the 69-72 pcs.

Thanks again
dan

shifty · 10-02-2007, 11:31 PM

the hole is so big (i assume) so you can actually move the front clip around when you go to bolt up.

think about it - if it's a static, tiny hole to fit that 7/16" carriage bolt, you can't move it forward/back/left/right/diagonal, so it really isnt' conducive to somewhat flexible factory tolerances.

this is just my thought.

by the way - ALL of the body mounts on the truck are that large. All body mounts use large washers and/or rubber bushings to compensate.

10-01-2007, 07:23 PM	#1
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	attn: 67 and 68 owners Need Pictures of the radiator support mounts that are on the frame. Possibility that mine might have been hole cut to accomadate different mounts. Any pictures of virgin mounts will do me wonders. Thanks guys, Dan __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

10-01-2007, 08:22 PM	#2
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: attn: 67 and 68 owners If you are changing the rubber mounts with a cab mount kit that also contains the radiator supports and it doesn't look like it fits or causes alignment issues with the front end you possibly got a kit that has 69-72 radiator supports mounts.I know the kits say 67-72 but the rad sup mounts are different. Just a thought on why you are asking. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 10-01-2007 at 08:23 PM.

10-01-2007, 08:36 PM	#3
SacramentoJoe Always Fixing Things Join Date: Mar 2007 Location: Roseville, CA Posts: 390	Re: attn: 67 and 68 owners Here are the left and right side of my '68. Don't mind the dirt, I had some fun last weekend. The other stuff is what I call "surface rust" Attached Images __________________ Just an Average Joe ‘68 GMC 307 3spd – My dad's original truck 310,000 miles

10-02-2007, 03:24 PM	#5
dan468 Registered User Join Date: Nov 2006 Location: Sun City, Arizona Posts: 430	Re: attn: 67 and 68 owners ttt __________________ 68 C-10 Build thread http://67-72chevytrucks.com/vboard/s...d.php?t=414699

10-02-2007, 05:16 PM	#6
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: attn: 67 and 68 owners top view: http://satellitehead.com/images/68ch...teering002.jpg http://satellitehead.com/images/68ch...teering001.jpg Of course, the tab with the large half-dollar sized hole is the support I think you're asking about. Hope that does you wonders If not, check out my gallery and look for more pics (it's running a tad slow right now for some reason): http://satellitehead.com/gallery __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

10-02-2007, 11:31 PM	#8
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: attn: 67 and 68 owners the hole is so big (i assume) so you can actually move the front clip around when you go to bolt up. think about it - if it's a static, tiny hole to fit that 7/16" carriage bolt, you can't move it forward/back/left/right/diagonal, so it really isnt' conducive to somewhat flexible factory tolerances. this is just my thought. by the way - ALL of the body mounts on the truck are that large. All body mounts use large washers and/or rubber bushings to compensate. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.