FS: Spindles - stock height- for disk brakes - KANSAS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

53lowdown · 02-04-2007, 05:35 PM

SOLD

Early Classic spindles off of 69 C10 - stock height disk-brake conversion spindles. New 1 year ago, installed on truck but only driven a few hundred miles. I switched to dropped spindles so no longer need these.

These work with the 69 C10 ball joints and tie-rod ends, and 70? and up 1 1/4" rotors and calipers. Only the spindles are for sale.

Early Classic Spindles are the original '60-'72 Stock Height (Disc Brake Conversion) Spindles, and are machined to accept your original tie rods and ball joints.

LIKE NEW, but USED
$150 plus shipping from 66610 (Kansas)

[ol'Blue] · 02-04-2007, 10:10 PM

how much drop, on the spindles you installed?
do you have any clearance problems?

*67BABYBLUE* · 02-04-2007, 10:26 PM

What brand drop spindles did you use? Thanks

53lowdown · 02-04-2007, 10:53 PM

I'm now running 2.5 inch drop spindles from Early Classic, and 3 inch drop springs. No problems rubbing - running 245/40/18's

huero · 05-06-2007, 01:45 PM

Do you accept paypal?

huero · 05-07-2007, 12:03 AM

Sorry, 53 lowdown I am going to pass on the spindles.

70c10 · 06-06-2007, 10:25 PM

Wow, that's a good deal!.

53lowdown · 07-17-2007, 05:37 PM

bump

**DREW67** · 07-17-2007, 07:41 PM

What part of kansas are you in? I'm in KCMO

Searcye · 07-23-2007, 07:28 PM

Are these still available?

53lowdown · 07-30-2007, 11:36 AM

Quote:

Originally Posted by DREW67

What part of kansas are you in? I'm in KCMO

Sorry for the delay - guess I didn't have my subscription notifications set right.
I'm in Topeka, but go through KC quite often. Let me know if you are still interested.

53lowdown · 07-30-2007, 11:36 AM

Quote:

Originally Posted by Searcye

Are these still available?

Yes - still available.

53lowdown · 09-22-2007, 10:49 AM

bump

69gmc292 · 10-02-2007, 07:47 PM

are they still for sale

53lowdown · 10-03-2007, 09:39 AM

Yep, still for sale. PM sent

charlie diaz · 10-03-2007, 12:03 PM

I'll give you $150, shipped. The cashiers check can be in the mail this afternoon.
thanks

53lowdown · 10-03-2007, 12:06 PM

Quote:

Originally Posted by charlie diaz

I'll give you $150, shipped. The cashiers check can be in the mail this afternoon.
thanks

PM sent

53lowdown · 10-03-2007, 02:17 PM

Quote:

Originally Posted by 69gmc292

are they still for sale

PM Sent

53lowdown · 10-04-2007, 08:23 AM

Quote:

Originally Posted by 69gmc292

are they still for sale

Quote:

Originally Posted by 53lowdown

PM Sent

SOLD!

02-04-2007, 05:35 PM	#1
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	FS: Spindles - stock height- for disk brakes - KANSAS SOLD Early Classic spindles off of 69 C10 - stock height disk-brake conversion spindles. New 1 year ago, installed on truck but only driven a few hundred miles. I switched to dropped spindles so no longer need these. These work with the 69 C10 ball joints and tie-rod ends, and 70? and up 1 1/4" rotors and calipers. Only the spindles are for sale. Early Classic Spindles are the original '60-'72 Stock Height (Disc Brake Conversion) Spindles, and are machined to accept your original tie rods and ball joints. LIKE NEW, but USED $150 plus shipping from 66610 (Kansas) __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible Last edited by 53lowdown; 10-05-2007 at 09:30 AM.

02-04-2007, 10:10 PM	#2
[ol'Blue] Registered User Join Date: Jan 2007 Location: West Texas Posts: 158	Re: FS: Spindles - stock height- for disk brakes - KANSAS how much drop, on the spindles you installed? do you have any clearance problems?

02-04-2007, 10:26 PM	#3
67BABYBLUE Account Suspended Join Date: Apr 2003 Location: Crown Point,IN Posts: 257	Re: FS: Spindles - stock height- for disk brakes - KANSAS What brand drop spindles did you use? Thanks

02-04-2007, 10:53 PM	#4
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	Re: FS: Spindles - stock height- for disk brakes - KANSAS I'm now running 2.5 inch drop spindles from Early Classic, and 3 inch drop springs. No problems rubbing - running 245/40/18's __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible Last edited by 53lowdown; 02-11-2007 at 10:11 PM.

05-06-2007, 01:45 PM	#5
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: FS: Spindles - stock height- for disk brakes - KANSAS Do you accept paypal?

05-07-2007, 12:03 AM	#6
huero 1969 Short, Fleet, and Beat Join Date: Apr 2007 Location: Long Beach, Ca. Posts: 867	Re: FS: Spindles - stock height- for disk brakes - KANSAS Sorry, 53 lowdown I am going to pass on the spindles.

06-06-2007, 10:25 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: FS: Spindles - stock height- for disk brakes - KANSAS Wow, that's a good deal!. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-17-2007, 05:37 PM	#8
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	Re: FS: Spindles - stock height- for disk brakes - KANSAS bump __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible

07-17-2007, 07:41 PM	#9
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,031	Re: FS: Spindles - stock height- for disk brakes - KANSAS What part of kansas are you in? I'm in KCMO __________________ DREW67

07-23-2007, 07:28 PM	#10
Searcye Registered User Join Date: Dec 2006 Location: College Park, GA Posts: 4	Re: FS: Spindles - stock height- for disk brakes - KANSAS Are these still available?

09-22-2007, 10:49 AM	#13
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	Re: FS: Spindles - stock height- for disk brakes - KANSAS bump __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible

10-02-2007, 07:47 PM	#14
69gmc292 Registered User Join Date: Mar 2007 Location: tucson Posts: 71	Re: FS: Spindles - stock height- for disk brakes - KANSAS are they still for sale

10-03-2007, 09:39 AM	#15
53lowdown Junior Member Join Date: Feb 2005 Location: topeka, kansas Posts: 258	Re: FS: Spindles - stock height- for disk brakes - KANSAS Yep, still for sale. PM sent __________________ _______________________________________ 62 SWB BBW (under construction) 86 Vette Convertible

10-03-2007, 12:03 PM	#16
charlie diaz Registered User Join Date: May 2005 Location: Colorado Posts: 138	Re: FS: Spindles - stock height- for disk brakes - KANSAS I'll give you $150, shipped. The cashiers check can be in the mail this afternoon. thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.