WIW 67 Chevy misc parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ksjh1316* · 10-08-2007, 04:48 PM

Clean Grill no dents or damage
Hood straight no rust clear coat has peeled off
rad support clean rust free
pass side front qtr may have bondo cant tell looks straight
good shape aftermarket a/c complete with brackets works

If any one can help me out with this I may look to save it or else I have been tols its crusher time on wends. Back end of this looks like it was hit by a semi short bed was totally torn off the truck. From what i say this may be tha only thing that is salvageable unless you know some other things that should be saved. The owner of the yard would rather scrap it all and should have a price for me by tues just don't want to get screwed and want to save the 67 parts from becoming Kia's.

Just talked with the owner of the yard everything can be had for $200.00 let me know.

LUV2XCLR8 · 10-08-2007, 05:17 PM

Sounds like a good deal, but w/out pic's I can't be 100% sure

*ksjh1316* · 10-08-2007, 05:23 PM

He wouldn't let me take pick of her the more I think about it I may be able to get the whole front clip for 200.00. I will try and sneak some picks later when he is not around.

meathead95 · 10-08-2007, 05:26 PM

what kind of aftermarket ac is it?

*ksjh1316* · 10-08-2007, 05:33 PM

Just the cheasy square box that sits at a funky angle. Its hot in KS need ac real bad lol

kyull67 · 10-08-2007, 08:30 PM

I might be interested in the hood if you get it.

*ksjh1316* · 10-08-2007, 09:58 PM

Thanks for the help so far need more input the truck will hit the crusher in the morn.

Luvlegs · 10-09-2007, 08:24 AM

hope it's not too late - I don't need anything for a 67 but I'd bet (depending on condition) you could get 50 for each fender (shipping might be costly) and 75-100 for the grille (ie: ith trim rings?). Is any of the AC stuff still on the engine? All the brackets and such would sell - depending on what they are - if it's a 6 cylinder ac setup or for a 454, put me in line! hahaha Be careful about cutting into an AC system that might be still charged... SAFETY FIRST... I'd get what you can. Good luck!

10-08-2007, 04:48 PM	#1
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	WIW 67 Chevy misc parts Clean Grill no dents or damage Hood straight no rust clear coat has peeled off rad support clean rust free pass side front qtr may have bondo cant tell looks straight good shape aftermarket a/c complete with brackets works If any one can help me out with this I may look to save it or else I have been tols its crusher time on wends. Back end of this looks like it was hit by a semi short bed was totally torn off the truck. From what i say this may be tha only thing that is salvageable unless you know some other things that should be saved. The owner of the yard would rather scrap it all and should have a price for me by tues just don't want to get screwed and want to save the 67 parts from becoming Kia's. Just talked with the owner of the yard everything can be had for $200.00 let me know. Last edited by ksjh1316; 10-08-2007 at 04:59 PM. Reason: new info

10-08-2007, 05:17 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: WIW 67 Chevy misc parts Sounds like a good deal, but w/out pic's I can't be 100% sure __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-08-2007, 05:23 PM	#3
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: WIW 67 Chevy misc parts He wouldn't let me take pick of her the more I think about it I may be able to get the whole front clip for 200.00. I will try and sneak some picks later when he is not around.

10-08-2007, 05:26 PM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: WIW 67 Chevy misc parts what kind of aftermarket ac is it? __________________ 72 2wd blazer 72 swb 4x4

10-08-2007, 05:33 PM	#5
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: WIW 67 Chevy misc parts Just the cheasy square box that sits at a funky angle. Its hot in KS need ac real bad lol

10-08-2007, 08:30 PM	#6
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: WIW 67 Chevy misc parts I might be interested in the hood if you get it. __________________ The first '67 The current '67 '63 Biscayne

10-08-2007, 09:58 PM	#7
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: WIW 67 Chevy misc parts Thanks for the help so far need more input the truck will hit the crusher in the morn.

10-09-2007, 08:24 AM	#8
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: WIW 67 Chevy misc parts hope it's not too late - I don't need anything for a 67 but I'd bet (depending on condition) you could get 50 for each fender (shipping might be costly) and 75-100 for the grille (ie: ith trim rings?). Is any of the AC stuff still on the engine? All the brackets and such would sell - depending on what they are - if it's a 6 cylinder ac setup or for a 454, put me in line! hahaha Be careful about cutting into an AC system that might be still charged... SAFETY FIRST... I'd get what you can. Good luck! __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 10-09-2007 at 08:24 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.