exhaust tips/sound level - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GREASEMONKEY72 · 10-20-2007, 01:22 AM

is it true that the shorter the tip the louder the exhaust will be? im thinking of cutting the tips down a bit instead of running it open and risking losing the mpg

68K20 x Drill · 10-20-2007, 03:18 AM

more pipe or more bends will always make it quieter.
Not necessarily enough difference that you would care.
cut a half a foot off, and you probably can't hear the difference.
Cut the tailpipe off at the muffler, and it will be a good bit louder usually.
This also varies with pipe size, and is a bunch of voodoo.
Lucky for you exhaust is easy to reattach if you decide you shouldn't have cut it.

Spray-Bomb · 10-20-2007, 09:19 PM

A lot of it has to do with where it exits, as to how loud it is to the driver

Say you ran it all the way out the back, it's prolly about as loud as if it was right behind the cab just you don't hear it as much cuz it's not as close to you

crazy longhorn · 10-20-2007, 09:52 PM

If you like it louder, cut a bit off the ends of the tail pipes(16-18"), & add a set of 3 1/2" dia x 16 or 18" long chrome or stainless "cans" (tips). That will make it bark

L

JAKES 68GMC · 10-20-2007, 11:20 PM

Yeah big long tips will help them talk more.

10-20-2007, 01:22 AM	#1
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	exhaust tips/sound level is it true that the shorter the tip the louder the exhaust will be? im thinking of cutting the tips down a bit instead of running it open and risking losing the mpg __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

10-20-2007, 03:18 AM	#2
68K20 x Drill Registered User Join Date: Apr 2007 Location: Freedom CA Posts: 488	Re: exhaust tips/sound level more pipe or more bends will always make it quieter. Not necessarily enough difference that you would care. cut a half a foot off, and you probably can't hear the difference. Cut the tailpipe off at the muffler, and it will be a good bit louder usually. This also varies with pipe size, and is a bunch of voodoo. Lucky for you exhaust is easy to reattach if you decide you shouldn't have cut it. __________________ 68 Chevrolet k20 Longbed 350 SM465/205, Dana 44, 14bolt, Power steering, Power Disk Brakes, 35" BFGs. 84 Chevrolet Suburban K20 6.2 Banks turbo TH400/NP208 Now with G80 68 GMC C20 Parts? Truck And a few cars

10-20-2007, 09:19 PM	#3
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: exhaust tips/sound level A lot of it has to do with where it exits, as to how loud it is to the driver Say you ran it all the way out the back, it's prolly about as loud as if it was right behind the cab just you don't hear it as much cuz it's not as close to you __________________ Just not low enough... ----------------------------- Sinister Killer

10-20-2007, 09:52 PM	#4
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: exhaust tips/sound level If you like it louder, cut a bit off the ends of the tail pipes(16-18"), & add a set of 3 1/2" dia x 16 or 18" long chrome or stainless "cans" (tips). That will make it bark L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

10-20-2007, 11:20 PM	#5
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: exhaust tips/sound level Yeah big long tips will help them talk more.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.