67 LWB - One Sun visor??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mt Man Chad · 10-28-2007, 01:23 PM

I recently brought home a 67 LWB and been doing some cleaning inside and ready to replace front rotted fenders and put a good hood on it.

I was working on the interior last weekend and the driver side sun visor had a wasp nest behind it and was trashed, I was ready to install two good green ones I have.

I went to screw in the passenger side BUT it is not even drilled for a visor and never appears to have had one???????

Has anybody ever come across this?

cdowns · 10-28-2007, 01:30 PM

it wasnt uncommon back then for basic trucks// i hadd a van that only had a drivers seat and 1visor// the 60 ford pickup i'm working on had only 1visor and driver only wiper

uno67 · 10-28-2007, 02:41 PM

same deal on my truck but if you look close on mine you can see the dimples where the holes need to go

CJJ67 · 10-28-2007, 04:01 PM

I have a '67 short bed stepside and mine is the same, only the driver's side has a sun visor. When I get to that point I will drill the holes for a passenger side visor.

67_C-30 · 10-28-2007, 05:54 PM

My '67 C-30 didn't come with a passenger side visor or a rear view mirror. It has dimples where they would have mounted, but were never drilled.

**passthebuck** · 10-28-2007, 06:16 PM

my red 67 is the same - one visor

bad6772 · 10-28-2007, 06:38 PM

< my 67 was also a one visor truck...did add another one though........

wibilly · 10-29-2007, 03:09 AM

i have two 67's one with[cst with air and a plane jane swb with only one, i guess i never looked at it close enough to notice any dimples

Gray Ghost · 11-03-2007, 08:02 AM

I have a 67 stepper and it's the same way...I thought it was weird but I've seen two others since.

aventur1 · 11-03-2007, 08:54 AM

My 71 only came with one, there's plastic covers where it should be.

Guy58 · 11-03-2007, 11:54 AM

I also have a 1967 stepside with only a driver side sun visor. I thought it strange and did notice dimples where the passanger visor should be. My question is if I want to install the passanger side one do I just need to drill holes or do I need a plate behind the metal to hold it in place? Thanks.

**michael bustamante** · 11-03-2007, 12:59 PM

My 67 came with 2 sunvisors but only the driver side rear view mirror. the pass. side is smooth. also, my interior door skins have no holes to mount the arm rests. and it`s a custom cab

CPNEJR · 11-03-2007, 02:27 PM

the passenger visor was an option as was a rear view mirror on the inside and on the passenger side. since back then it only needed one rear view mirror on the vehicle they were optional but after 67 i believe the you had to have all three. the armrest were also optional i believe.

davidh · 11-03-2007, 02:40 PM

Quote:

Originally Posted by Mt Man Chad

I recently brought home a 67 LWB and been doing some cleaning inside and ready to replace front rotted fenders and put a good hood on it.

I was working on the interior last weekend and the driver side sun visor had a wasp nest behind it and was trashed, I was ready to install two good green ones I have.

I went to screw in the passenger side BUT it is not even drilled for a visor and never appears to have had one???????

Has anybody ever come across this?

post some pics of that bad boy. want to see it.

Mt Man Chad · 11-03-2007, 03:56 PM

These are the only currently pics i have. I'm putting a complete matching front clip on it this weekends from another truck I parted. It currently has a completey rotted Core support and both fenders are gone. From the firewall and back it's pretty clean.

I have allways like the small window cabs!

davidh · 11-03-2007, 04:11 PM

I'd buy them all day for that price. They are hard not to when they are that cheap. clean rockers to boot. I call them work trucks, once someone scratched their head and asked how many work trucks do you need? LOL

**michael bustamante** · 11-03-2007, 05:09 PM

I guess even the wasps know a good truck. My 49 GMC came with a couple of good sized wasps nest in it from years past. One was good sized too. under the gas pedal

Critter · 11-03-2007, 05:21 PM

Y'all should start a new "club" to put down in your avatar area. Instead of "The 4x4 Club" or "The Disc Brake Club", it could say "The One Visor Club" or maybe the "MonoVisor Club"

PanelDeland · 11-03-2007, 06:51 PM

Think a visor is a strange option?Look at a Panel,the passenger seat is an option.

Gray Ghost · 11-03-2007, 07:11 PM

The panel also has a very unique floor there with traction strips. It's almost shaped like a ramp.

davidh · 11-03-2007, 09:34 PM

most of the time one 's I run across with one visor are 3/4 ton. Im not sure about the option. Never seen a glove box id say "passenger sun visor" as on option

10-28-2007, 01:23 PM	#1
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	67 LWB - One Sun visor??? I recently brought home a 67 LWB and been doing some cleaning inside and ready to replace front rotted fenders and put a good hood on it. I was working on the interior last weekend and the driver side sun visor had a wasp nest behind it and was trashed, I was ready to install two good green ones I have. I went to screw in the passenger side *BUT* it is not even drilled for a visor and never appears to have had one??????? Has anybody ever come across this? Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 10-28-2007 at 01:36 PM.

10-28-2007, 01:30 PM	#2
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: 67 LWB - One Sun visor??? it wasnt uncommon back then for basic trucks// i hadd a van that only had a drivers seat and 1visor// the 60 ford pickup i'm working on had only 1visor and driver only wiper __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-28-2007, 02:41 PM	#3
uno67 Registered User Join Date: Mar 2003 Location: Tucson, Az Posts: 185	Re: 67 LWB - One Sun visor??? same deal on my truck but if you look close on mine you can see the dimples where the holes need to go

10-28-2007, 04:01 PM	#4
CJJ67 Registered User Join Date: Sep 2003 Location: Temecula, Ca. Posts: 64	Re: 67 LWB - One Sun visor??? I have a '67 short bed stepside and mine is the same, only the driver's side has a sun visor. When I get to that point I will drill the holes for a passenger side visor.

10-28-2007, 05:54 PM	#5
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: 67 LWB - One Sun visor??? My '67 C-30 didn't come with a passenger side visor or a rear view mirror. It has dimples where they would have mounted, but were never drilled. __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

10-28-2007, 06:16 PM	#6
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: 67 LWB - One Sun visor??? my red 67 is the same - one visor __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

10-28-2007, 06:38 PM	#7
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: 67 LWB - One Sun visor??? < my 67 was also a one visor truck...did add another one though........

10-29-2007, 03:09 AM	#8
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: 67 LWB - One Sun visor??? i have two 67's one with[cst with air and a plane jane swb with only one, i guess i never looked at it close enough to notice any dimples __________________ common sense isn't so common anymore

11-03-2007, 08:02 AM	#9
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 67 LWB - One Sun visor??? I have a 67 stepper and it's the same way...I thought it was weird but I've seen two others since. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

11-03-2007, 08:54 AM	#10
aventur1 Registered User Join Date: Aug 2007 Location: Boise, Idaho Posts: 676	Re: 67 LWB - One Sun visor??? My 71 only came with one, there's plastic covers where it should be. Last edited by aventur1; 11-03-2007 at 08:54 AM. Reason: spelling

11-03-2007, 11:54 AM	#11
Guy58 Registered User Join Date: Oct 2007 Location: Albuquerque, NM Posts: 158	Re: 67 LWB - One Sun visor??? I also have a 1967 stepside with only a driver side sun visor. I thought it strange and did notice dimples where the passanger visor should be. My question is if I want to install the passanger side one do I just need to drill holes or do I need a plate behind the metal to hold it in place? Thanks.

11-03-2007, 12:59 PM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 67 LWB - One Sun visor??? My 67 came with 2 sunvisors but only the driver side rear view mirror. the pass. side is smooth. also, my interior door skins have no holes to mount the arm rests. and it`s a custom cab __________________ 1967custom

11-03-2007, 02:27 PM	#13
CPNEJR Registered User Join Date: Sep 2003 Location: Franconia,N.H. Posts: 1,029	Re: 67 LWB - One Sun visor??? the passenger visor was an option as was a rear view mirror on the inside and on the passenger side. since back then it only needed one rear view mirror on the vehicle they were optional but after 67 i believe the you had to have all three. the armrest were also optional i believe. __________________ (Only) Member of the CPNE Fan Club Aint that the truth 67 C-10 350 with 3-speed tranny and 308 gears swb step 82 Z28 Camaro 355 small block over 350 hp and a borg warner super t-10 (blown engine) 72 Chevy K20 Suburban (future project) 70 Chevy K20 now 68 GMC K2500 2003 Chevy 2500hd ccsb 4X4 (daily driver)

11-03-2007, 03:56 PM	#15
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 67 LWB - One Sun visor??? These are the only currently pics i have. I'm putting a complete matching front clip on it this weekends from another truck I parted. It currently has a completey rotted Core support and both fenders are gone. From the firewall and back it's pretty clean. I have allways like the small window cabs! Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 11-03-2007 at 04:30 PM.

11-03-2007, 04:11 PM	#16
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: 67 LWB - One Sun visor??? I'd buy them all day for that price. They are hard not to when they are that cheap. clean rockers to boot. I call them work trucks, once someone scratched their head and asked how many work trucks do you need? LOL Attached Images __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.



Register or Log In To remove these advertisements.

11-03-2007, 05:09 PM	#17
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: 67 LWB - One Sun visor??? I guess even the wasps know a good truck. My 49 GMC came with a couple of good sized wasps nest in it from years past. One was good sized too. under the gas pedal __________________ 1967custom

11-03-2007, 05:21 PM	#18
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: 67 LWB - One Sun visor??? Y'all should start a new "club" to put down in your avatar area. Instead of "The 4x4 Club" or "The Disc Brake Club", it could say "The One Visor Club" or maybe the "MonoVisor Club" __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com Last edited by Critter; 11-03-2007 at 05:22 PM.

11-03-2007, 06:51 PM	#19
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: 67 LWB - One Sun visor??? Think a visor is a strange option?Look at a Panel,the passenger seat is an option. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

11-03-2007, 07:11 PM	#20
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 67 LWB - One Sun visor??? The panel also has a very unique floor there with traction strips. It's almost shaped like a ramp. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

11-03-2007, 09:34 PM	#21
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	Re: 67 LWB - One Sun visor??? most of the time one 's I run across with one visor are 3/4 ton. Im not sure about the option. Never seen a glove box id say "passenger sun visor" as on option __________________ Even the nicest dodge-chrysler is only 2years away from being parked outside of Section 8 housing.

Register or Log In To remove these advertisements.