Wheels, Wheels, Wheels???? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tvblazer78 · 11-09-2007, 08:05 PM

Well it's down to Billet Specialties Soft Lip Vintec Dish and Billet Specialties Vintec. I pushing myself to the Soft Lip because it comes in 20x10 and the Vintec on comes in 20x9.5.

But one good thing I can get this with the wheels..

f.monroe · 11-09-2007, 08:21 PM

I am sure either will look good on your Blazer . One thing to consider . How much lip will be left on the front wheels if you run the Vin tec dish . The center of the wheel bells outwards from the lugs to where it meets the wheel hoop but you will need enough backspacing to keep it under the wheelwell .I would look into how much lip will be there . It might make the wheel face look flat . Frank

boxrodz · 11-09-2007, 08:44 PM

Quote:

Originally Posted by cochino12

Ha ha thats my old neighbors truck

OT.
I came across it in the parking lot of the Goodguys event a couple of years ago. Very well done.

Geez, I think I spent as much time checking it out than the rods inside the gates. I even had the parking lot security nervous.

draggin86 · 11-09-2007, 09:07 PM

Boze would look hot!

**N2TRUX** · 11-09-2007, 10:43 PM

VinTec SL dish-

**N2TRUX** · 11-09-2007, 10:46 PM

VinTec dish-

**N2TRUX** · 11-09-2007, 10:48 PM

VinTec-

poolboy65-ls1 · 11-09-2007, 11:46 PM

I want a 2wd Blazer!!!!!!!!!

cochino12 · 11-10-2007, 12:00 AM

Quote:

Originally Posted by N2TRUX

VinTec-

Hey Ken you should swap me front ends

**N2TRUX** · 11-10-2007, 12:15 AM

Quote:

Originally Posted by cochino12

Hey Ken you should swap me front ends

Now you tell me. I have (almost) all the pieces to convert my 82 to a 73. I will have a VERY modified 82 clip for sale in the future if you want to update yours.

poolboy65-ls1 · 11-10-2007, 12:18 AM

Hey Ken! You should swap me your blazer for my truck!

tvblazer78 · 11-10-2007, 10:00 AM

Thanks Ken for all the good pics.. Dose red truck have 20" front and back? If so that looks sweet..

This is the place that I my get wheels from, the big thing is I have to pay tax on them. check out the prices for me..

http://www.newstalgiawheel.com/wheel...p?subcat2=1024

Thanks,
Trav

Quote:

Originally Posted by N2TRUX

VinTec SL dish-

**N2TRUX** · 11-10-2007, 10:24 AM

Quote:

Originally Posted by tvblazer78

Thanks Ken for all the good pics.. Does red truck have 20" front and back? If so that looks sweet..
Thanks,Trav

Yep, 20's all around. It does look good, don't it?

**N2TRUX** · 11-10-2007, 10:29 AM

Quote:

Originally Posted by poolboy65-ls1

Hey Ken! You should swap me your blazer for my truck!

You might not want it in it's current condition, but if your interested we can talk. Oh yeah, you might want to bring cash too...

tvblazer78 · 11-10-2007, 03:43 PM

Ken your Blazer It's It's all gone..

Here's a pic that someone did for me with SL wheels

Quote:

Originally Posted by N2TRUX

You might not want it in it's current condition, but if your interested we can talk. Oh yeah, you might want to bring cash too...

11-09-2007, 08:05 PM	#26
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Wheels, Wheels, Wheels???? Well it's down to Billet Specialties Soft Lip Vintec Dish and Billet Specialties Vintec. I pushing myself to the Soft Lip because it comes in 20x10 and the Vintec on comes in 20x9.5. But one good thing I can get this with the wheels.. Attached Images __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

11-09-2007, 08:21 PM	#27
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wheels, Wheels, Wheels???? I am sure either will look good on your Blazer . One thing to consider . How much lip will be left on the front wheels if you run the Vin tec dish . The center of the wheel bells outwards from the lugs to where it meets the wheel hoop but you will need enough backspacing to keep it under the wheelwell .I would look into how much lip will be there . It might make the wheel face look flat . Frank __________________ Born and proudly residing in a Red State !

11-09-2007, 09:07 PM	#29
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Wheels, Wheels, Wheels???? Boze would look hot!

11-09-2007, 10:43 PM	#30
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Wheels, Wheels, Wheels???? VinTec SL dish- Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-09-2007, 10:46 PM	#31
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Wheels, Wheels, Wheels???? VinTec dish- Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" Last edited by N2TRUX; 11-09-2007 at 10:46 PM.

11-09-2007, 10:48 PM	#32
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Wheels, Wheels, Wheels???? VinTec- Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-09-2007, 11:46 PM	#33
poolboy65-ls1 iamthepoolboy! Join Date: Jun 2004 Location: Benton Arkansas Posts: 175	Re: Wheels, Wheels, Wheels???? I want a 2wd Blazer!!!!!!!!! __________________ Black primed 81 Silverado SWB one owner rust free all original 106,000 project. Steel cowl hood, 89/91 front grill, Blazer tailgate trim, sport rear bumper, 5/6 Drop, 17" Eagle Alloys, Big block is on the stand! COMING SOON: one piece glass, and more. Last edited by poolboy65-ls1; 11-09-2007 at 11:46 PM.

11-10-2007, 12:18 AM	#36
poolboy65-ls1 iamthepoolboy! Join Date: Jun 2004 Location: Benton Arkansas Posts: 175	Re: Wheels, Wheels, Wheels???? Hey Ken! You should swap me your blazer for my truck! __________________ Black primed 81 Silverado SWB one owner rust free all original 106,000 project. Steel cowl hood, 89/91 front grill, Blazer tailgate trim, sport rear bumper, 5/6 Drop, 17" Eagle Alloys, Big block is on the stand! COMING SOON: one piece glass, and more.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.