71 blazer parts:top, front clip, lift, wheels ... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gottwake · 11-08-2007, 10:21 PM

and here...

gottwake · 11-08-2007, 10:32 PM

Oh yea, It's all going (except for the body). Wheels, axels, front shaft + transfer case, windsheild, visors, OEM guage cluster, ash tray. + whatever else I unpack.

CCCC · 11-09-2007, 12:10 AM

I aplogize if I missed it, but did you quote a price on the top - and whether it is single or double wall?

e5j · 11-09-2007, 12:13 AM

I'm interested in the top. Where in SoCal are you? I'm in San Diego.

This top should fit a '72 as well, shouldn't it?

mkmiller1 · 11-09-2007, 01:22 AM

PM sent

gottwake · 11-09-2007, 09:58 AM

I am sure that its a dbl wall cause the bolts go up thru the bottom rails. Also, the hatch works perfect and only damage is a small stress crack and chip on inside passanger side. I used to own a body shop so I am capable of doing repairs (the right way) for a small fee.LOL The pics on page 1 show the wear.

bad_turbo · 11-09-2007, 09:41 PM

do you have all the brackets and hardware for the rear seat? Is it mounted where the front seats should be? How much were you going to ask for the seat? Oh, and I have a suburban that needs LOTS of bodywork

**too much stuff** · 11-09-2007, 10:26 PM

What is the condition of the gauge cluster? Eric

gottwake · 11-09-2007, 11:55 PM

The seat has the mounting hardware. Here is a pic of the cluster and I also found the two stock mirrors and glove compartment door.

David Johnson · 11-10-2007, 12:24 AM

I'm still interested in the seat if you will ship it. Need a price shipped to 74873. Thanks

gottwake · 11-10-2007, 12:36 AM

It shows 83.00 from here to yander. It's kinda heavy.

David Johnson · 11-10-2007, 08:59 AM

Okay, what was the price for the seat itself. If I pay the $83 and some extra for packaging, will you pack and ship it?

gottwake · 11-10-2007, 09:59 AM

Absolutly, BTY...how much did I say for the seat?

Chevyman63 · 11-10-2007, 10:52 AM

Quote:

Originally Posted by Chevyman63

Put me in line for fuel cell also, if it gets this far. How about pics of inner fenders and shipping to 48867.
Thanks

Any progress on pics & price for inner fenders?
What is the status of the fuel cell?
Thanks!

Matt72blaze · 11-10-2007, 05:30 PM

waitin' on pics of the front clip....

thanks,
matt

gottwake · 11-10-2007, 06:32 PM

Okay, Clip...a little damage on the fender. But core, hood, inners all in great shape.

gottwake · 11-10-2007, 06:38 PM

...

gottwake · 11-10-2007, 06:40 PM

okay...

David Johnson · 11-10-2007, 09:19 PM

I've looked all through the thread and can't find a seat price. Let me know.

gottwake · 11-10-2007, 10:29 PM

Man...I dont know, whatever is fair. Not really looking to make a bunch of money but more to help out with some not-so-easy parts to find.

DieselEater · 11-10-2007, 11:13 PM

I'd like a quote on front driveline shipped to 81082...I think I'm second in line.

Thanks,

A.....

bad_turbo · 11-11-2007, 04:21 PM

If Mr. Johnson passes on the rear seat, I will pick it up.

wibilly · 11-11-2007, 06:57 PM

how much for the mirrors i gave mine to abuddy when i had other plans now i need some 54859 is my zip

jaros44sr · 11-11-2007, 09:13 PM

Did read rite? Are taking off the windshield frame, 'cause if you are, I would be interested in it. Let me know if the is any rust in it and you could get pics. Thanks for your time... J

11-08-2007, 10:21 PM	#26
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... and here... Attached Images

11-08-2007, 10:32 PM	#27
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... Oh yea, It's all going (except for the body). Wheels, axels, front shaft + transfer case, windsheild, visors, OEM guage cluster, ash tray. + whatever else I unpack.

11-09-2007, 12:10 AM	#28
CCCC Registered User Join Date: Mar 2007 Location: San Pedro River, SE Arizona Posts: 734	Re: 71 blazer parts:top, front clip, lift, wheels ... I aplogize if I missed it, but did you quote a price on the top - and whether it is single or double wall? __________________ CCCC 67 Sting Ray Coupe 327 4sp; 68 K10 Suburban 327 4sp; 69 K20 Lifted 383 4sp; 69 C80 Fire Truck 478 V6 5sp/2sp; 69 C20 Longhorn 327 4sp; 70 C30 Wrecker 350 4sp; 70 C30 Flat Bed 350 4sp; 71 C20 LWB 350 4sp; 72 K5 Blazer 350 4sp; 72 C30 Flat Bed Gooseneck Hauler with sleeper 350/TH400; 72 C20 Longhorn 402 4sp; 52 Mack LTL Supercharged Cummins 5sp x 3sp; 01 Dodge 5.9 HO Cummins 6spd; 02 Safari Trek 2430 8.1 Vortec on Workhorse Chassis; 03 Silverado 2500 HD 4wd Duramax/Allison Moved but still in the family 70 C20 Custom Camper 350/TH350; 72 K5 Blazer CST Highlander 350/TH350 Recently sent to new homes 72 C30 MoHome 402 4sp; 72 K5 Blazer Conv 350 4sp; 75 GMC 6000 Aerial 350 w Allison; 72 GMC 3500 Utility 350 4sp; 70 GMC 3500, 350 4sp

11-09-2007, 12:13 AM	#29
e5j Registered User Join Date: Aug 2007 Location: San Diego, CA Posts: 9	Re: 71 blazer parts:top, front clip, lift, wheels ... I'm interested in the top. Where in SoCal are you? I'm in San Diego. This top should fit a '72 as well, shouldn't it?

11-09-2007, 01:22 AM	#30
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	Re: 71 blazer parts:top, front clip, lift, wheels ... PM sent __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

11-09-2007, 09:58 AM	#31
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... I am sure that its a dbl wall cause the bolts go up thru the bottom rails. Also, the hatch works perfect and only damage is a small stress crack and chip on inside passanger side. I used to own a body shop so I am capable of doing repairs (the right way) for a small fee.LOL The pics on page 1 show the wear.

11-09-2007, 09:41 PM	#32
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 71 blazer parts:top, front clip, lift, wheels ... do you have all the brackets and hardware for the rear seat? Is it mounted where the front seats should be? How much were you going to ask for the seat? Oh, and I have a suburban that needs LOTS of bodywork __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting " Last edited by bad_turbo; 11-09-2007 at 10:25 PM.

11-09-2007, 10:26 PM	#33
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,715	Re: 71 blazer parts:top, front clip, lift, wheels ... What is the condition of the gauge cluster? Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-09-2007, 11:55 PM	#34
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... The seat has the mounting hardware. Here is a pic of the cluster and I also found the two stock mirrors and glove compartment door. Attached Images

11-10-2007, 12:24 AM	#35
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 71 blazer parts:top, front clip, lift, wheels ... I'm still interested in the seat if you will ship it. Need a price shipped to 74873. Thanks

11-10-2007, 12:36 AM	#36
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... It shows 83.00 from here to yander. It's kinda heavy.

11-10-2007, 08:59 AM	#37
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 71 blazer parts:top, front clip, lift, wheels ... Okay, what was the price for the seat itself. If I pay the $83 and some extra for packaging, will you pack and ship it?

11-10-2007, 09:59 AM	#38
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... Absolutly, BTY...how much did I say for the seat?

11-10-2007, 05:30 PM	#40
Matt72blaze Registered User Join Date: Sep 2007 Location: Wilmington, OH Posts: 60	Re: 71 blazer parts:top, front clip, lift, wheels ... waitin' on pics of the front clip.... thanks, matt __________________ 1970 C20 now a K30 1986 3+3 Dually

11-10-2007, 06:32 PM	#41
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... Okay, Clip...a little damage on the fender. But core, hood, inners all in great shape. Attached Images __________________ Blazer Project



Register or Log In To remove these advertisements.

11-10-2007, 06:38 PM	#42
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... ... Attached Images __________________ Blazer Project

11-10-2007, 06:40 PM	#43
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... okay... Attached Images __________________ Blazer Project

11-10-2007, 09:19 PM	#44
David Johnson Registered User Join Date: Dec 2004 Location: Shawnee, OK Posts: 614	Re: 71 blazer parts:top, front clip, lift, wheels ... I've looked all through the thread and can't find a seat price. Let me know.

11-10-2007, 10:29 PM	#45
gottwake Registered User Join Date: Oct 2007 Location: Santa Clarita, CA Posts: 581	Re: 71 blazer parts:top, front clip, lift, wheels ... Man...I dont know, whatever is fair. Not really looking to make a bunch of money but more to help out with some not-so-easy parts to find. __________________ Blazer Project

11-10-2007, 11:13 PM	#46
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: 71 blazer parts:top, front clip, lift, wheels ... I'd like a quote on front driveline shipped to 81082...I think I'm second in line. Thanks, A..... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

11-11-2007, 04:21 PM	#47
bad_turbo turbo enthusiast Join Date: Jan 2004 Location: carmichael, ca. Posts: 1,826	Re: 71 blazer parts:top, front clip, lift, wheels ... If Mr. Johnson passes on the rear seat, I will pick it up. __________________ "But daddy, I didn't hit them all with a stick"...what my 6 year old tells me when I pick him up from school early for fighting "

11-11-2007, 06:57 PM	#48
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: 71 blazer parts:top, front clip, lift, wheels ... how much for the mirrors i gave mine to abuddy when i had other plans now i need some 54859 is my zip __________________ common sense isn't so common anymore

11-11-2007, 09:13 PM	#49
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,462	Re: 71 blazer parts:top, front clip, lift, wheels ... Did read rite? Are taking off the windshield frame, 'cause if you are, I would be interested in it. Let me know if the is any rust in it and you could get pics. Thanks for your time... J __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 11-12-2007 at 06:10 AM.

Register or Log In To remove these advertisements.