The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-13-2007, 08:34 PM   #1
b1v3r
Registered User
 
Join Date: Aug 2007
Location: Austin, Texas
Posts: 11
Swapping 4.3 V6

I have an 85 CK that has a great body and nice running 4.3. V6. It only has about 68,/70,000 miles original miles on it because the previous owner died and it sat dorment for 2 years. I am fearful of the engine because of the age, (but it runs great). Would it be better to have the v6 rebuilt or go ahead and swap out for a rebuilt 305. Im not into speed, but I am into original and semi-custom. I was told that a 305 would bolt right up to thr recently rebuilt tranny and all I would need would be a/c brackets. It doesnt have ac now. I live on a very limited budget.
b1v3r is offline   Reply With Quote
Old 11-13-2007, 08:38 PM   #2
old Rusty C10
Robert Olson Transport
 
old Rusty C10's Avatar
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,280
Re: Swapping 4.3 V6

id just run the truck.. the 305 gives you no more power than the six, and the gas mileage stinks not that the six is much better but i had a truck (86) that had the 4.3 and it ran like a champ and did whatever i needed it to.. change your fluids and just drive dont fix what aint broke
__________________
Bob



1951 International running on a squarebody chassis


"If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board"
http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!)


PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport

Live each day to the fullest.. you never know when fate is going to pull the rug out from under you...
I hate cancer!!
old Rusty C10 is offline   Reply With Quote
Old 11-13-2007, 09:52 PM   #3
cjracing15
Registered User
 
cjracing15's Avatar
 
Join Date: Jan 2007
Location: Lexington, TN
Posts: 1,427
Re: Swapping 4.3 V6

I just did this swap on a 4X4 86. IT IS DEFINITLY NOT JUST A BOLT IN SWAP!!!

You need V-8 motor mounts, exaust manafoilds, new carb linkage brackets, along with new acc cable a tv cable for trans, new exaust pipes,(4.3 uses very small pipe size) v-8 radator and shroud, plus you need to find a good running 305 350. but all of your accs. on the front of the motor will bolt to a small block.

If you are going to be on a small budget and the 4.3 runs sweet I would do the needed mantance on the motor and drive it. Then start your search for all of the parts you need for the swap. Then buy them as you go.

What I did was I bought a running but well used suburban with a 350 in it and used all stuff I needed off of that.

If you have any questions post them and I would be glad to help.
cjracing15 is offline   Reply With Quote
Old 11-13-2007, 10:09 PM   #4
motopatzo
Registered User
 
motopatzo's Avatar
 
Join Date: Oct 2006
Location: maple ridge, b.c., canada
Posts: 190
Re: Swapping 4.3 V6

I also agree. If you don't mind the power you have know, I would leave it alone. I had a 4.3 in my truck, and it is not a straight swap.
motopatzo is offline   Reply With Quote
Old 11-14-2007, 04:12 AM   #5
Pyrotechnic
Registered User
 
Pyrotechnic's Avatar
 
Join Date: Feb 2007
Location: Austin, TX
Posts: 3,930
Re: Swapping 4.3 V6

I agree, if you are on a budget you just answered your own question. Engine swaps are time consuming and will nickel and dime you along the way, at least if you want something that starts up every morning.
Pyrotechnic is offline   Reply With Quote
Old 11-14-2007, 11:56 AM   #6
60-66 Nut
Professional Beer Tester
 
Join Date: Aug 2004
Location: Louisiana
Posts: 453
Re: Swapping 4.3 V6

I have to agree with everyone else. I've done lots of engine swaps over the years, and if you don't have a parts donor vehicle it can run you crazy rounding up part after part, not to mention the cost. And if you did decide to do it, you might want to consider a 350. It fits in the same place as the 305, with much better power and probably about the same mileage.

The early(pre-vortec) 4.3's were very reliable engines. The one in my 92' GMC has 384,000 miles, it's never been rebuilt, and it still doesn't use any oil between changes(5,000 miles). I drive it 80 miles a day to work and back, and I still get 22-23mpg(5 spd).

So if yours runs good and doesn't leak or burn a bunch of oil, just run it and enjoy. Best of luck.

60-66 Nut
__________________
60 Ford F100 Custom Cab
61 Apache Short Fleetside
64 C10 Short Stepside
65 C80 409 V8 5spd(X-Firetruck)
83 GMC 350 Olds Diesel
85 GMC Short Bed
86 GMC Short Bed
90 GMC R3500 Crew Cab
92 GMC 1500
60-66 Nut is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com