heater a/c blower switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tk1251k · 11-18-2007, 03:14 PM

Ny fan switch I have replaced a couple times . I need to replace the plug that plugs into the switch it has four wires. Its in bad shape I had a fuse to blow and that I think is the problem. Anybody put a new plug and if so will wires have to be cut. thanks terry

bouncytruck · 11-18-2007, 04:06 PM

I haven't replaced the plug, but I've gone through 2 switched, hi-speed relay, relay and resistor. I need to replace the high-speed wire harness. The plug at the fuse block is bad.

You can buy a complete harness that will have the plug in place, otherwise, you'll probably need to cut and splice wires.

11-18-2007, 03:14 PM	#1
tk1251k Registered User Join Date: Nov 2005 Location: Newton Posts: 174	heater a/c blower switch Ny fan switch I have replaced a couple times . I need to replace the plug that plugs into the switch it has four wires. Its in bad shape I had a fuse to blow and that I think is the problem. Anybody put a new plug and if so will wires have to be cut. thanks terry

11-18-2007, 04:06 PM	#2
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: heater a/c blower switch I haven't replaced the plug, but I've gone through 2 switched, hi-speed relay, relay and resistor. I need to replace the high-speed wire harness. The plug at the fuse block is bad. You can buy a complete harness that will have the plug in place, otherwise, you'll probably need to cut and splice wires. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L Last edited by bouncytruck; 11-18-2007 at 04:07 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.