Alternator mounting locations.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 11-23-2007, 08:28 PM

ok.. i've got a factory big block factory air truck... 1970... i am pretty sure that the alt is supposed to go on the drivers side.... but i can't find a upper mounting bracket for it... i am using a small block one now with the bolt not even in the slot part but out on the end of the bracket.... was the big block upper bracket the same just longer????? i can't find any info... does anyone have some pics or suggestions...

thanks..

JCA1972 · 11-23-2007, 08:51 PM

I'll be keeping an eye on this thread, I have the same dillema.

corn · 11-23-2007, 09:40 PM

Ebay? LMC?

**'70_402** · 11-23-2007, 09:46 PM

no luck on info..... the ones they show look the same as what i have but what i have is too short

**lolife99** · 11-23-2007, 09:57 PM

Can you post some pics of what you have?

**lolife99** · 11-23-2007, 10:11 PM

CHeck out this thread in the parts section. Here's you answer,...http://67-72chevytrucks.com/vboard/s...d.php?t=267541.

kxnomore · 11-23-2007, 11:33 PM

Here's a closeup of the right bracket from my old 72 Custom Camper. Man, I wish I'd kept that truck!!!

**Classic Bowties** · 11-23-2007, 11:42 PM

Quote:

Originally Posted by 70'_402

ok.. i've got a factory big block factory air truck... 1970... i am pretty sure that the alt is supposed to go on the drivers side.... but i can't find a upper mounting bracket for it... i am using a small block one now with the bolt not even in the slot part but out on the end of the bracket.... was the big block upper bracket the same just longer????? i can't find any info... does anyone have some pics or suggestions...

thanks..

Yes, correct on drivers side mounting and if you are using the oe type lower alt. bracket (short w.p. only) then you will also need to use one of the two oe upper bracket type's pictured below. The top pic is the 68-71 type and the lower pic is of the three piece 72 setup, both setup's use the same lower cast cradle. Cb

**'70_402** · 11-25-2007, 01:51 PM

ok, great info that looks just like what i have but mine is too short... the alt hits the valve covers.... does the small block one look just like that one???

heres a pic of what i have.... if i move the alt into the ajdusting slot it hits the cover.

**clay68c10** · 11-25-2007, 03:36 PM

The 68-71 BBC top bracket looks very similar to the SBC one you have, but it's longer.

franko72 · 11-25-2007, 05:54 PM

those pics are dead on! I removed all of those parts today to change a leaky mainifold gasket.Easy to remove and replace.There is a strut type bar that mounts from the middle of the drivers side cylinder head to the top of the body bracket for support.

11-23-2007, 08:28 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Alternator mounting locations.... ok.. i've got a factory big block factory air truck... 1970... i am pretty sure that the alt is supposed to go on the drivers side.... but i can't find a upper mounting bracket for it... i am using a small block one now with the bolt not even in the slot part but out on the end of the bracket.... was the big block upper bracket the same just longer????? i can't find any info... does anyone have some pics or suggestions... thanks.. __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

11-23-2007, 08:51 PM	#2
JCA1972 Registered User Join Date: Dec 2006 Location: Baytown, Texas Posts: 194	Re: Alternator mounting locations.... I'll be keeping an eye on this thread, I have the same dillema. __________________ 1971 C-10 2004 Yukon: 1998 Honda Accord 2008 Honda Civic 2004 HD V-Rod http://67-72chevytrucks.com/vboard/s...d.php?t=226458

11-23-2007, 09:40 PM	#3
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Alternator mounting locations.... Ebay? LMC?

11-23-2007, 09:46 PM	#4
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Re: Alternator mounting locations.... no luck on info..... the ones they show look the same as what i have but what i have is too short __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

11-23-2007, 09:57 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Alternator mounting locations.... Can you post some pics of what you have? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-23-2007, 10:11 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Alternator mounting locations.... CHeck out this thread in the parts section. Here's you answer,...http://67-72chevytrucks.com/vboard/s...d.php?t=267541. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-23-2007, 11:33 PM	#7
kxnomore Registered User Join Date: Dec 2006 Location: CA Posts: 331	Re: Alternator mounting locations.... Here's a closeup of the right bracket from my old 72 Custom Camper. Man, I wish I'd kept that truck!!! Attached Images Last edited by kxnomore; 11-23-2007 at 11:34 PM. Reason: oops forgot pic.

11-25-2007, 01:51 PM	#9
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,553	Re: Alternator mounting locations.... ok, great info that looks just like what i have but mine is too short... the alt hits the valve covers.... does the small block one look just like that one??? heres a pic of what i have.... if i move the alt into the ajdusting slot it hits the cover. Attached Images __________________ https://www.ebay.com/itm/29620574751...mis&media=COPY

11-25-2007, 03:36 PM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,991	Re: Alternator mounting locations.... The 68-71 BBC top bracket looks very similar to the SBC one you have, but it's longer. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-25-2007, 05:54 PM	#11
franko72 Franko72 Join Date: May 2004 Location: Cincinnati,Ohio Posts: 471	Re: Alternator mounting locations.... those pics are dead on! I removed all of those parts today to change a leaky mainifold gasket.Easy to remove and replace.There is a strut type bar that mounts from the middle of the drivers side cylinder head to the top of the body bracket for support. __________________ 1972 C20 cheyenne Super 402 BB/400 turbo LWB A/C Tilt, Cruise Control, Saddle tanks, Tach My Home Page Better to burn out than it is to rust



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.