SWB Stepside Fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muckyp · 12-28-2002, 01:03 AM

Can someone tell me if anyone makes stepside fenders for these trucks? Or maybe does anyone have a drivers side fender without the spare tire notch they would like to get rid of cheap?

Thanks

chevy_fatman · 12-28-2002, 01:15 AM

Aftermarket stepside fenders are only made of fiberglass, nobody makes'em from steel, at least not yet, you can get used ones in good condition anywhere around 100 bucks and up

jku72 · 12-28-2002, 01:16 AM

try the parts board. If somebody has one, there is the place, just start a WTB fender thread.

Lightspeed · 12-28-2002, 10:52 AM

isn't goodmark sposed to start making them soon?

chevy_fatman · 12-28-2002, 12:35 PM

I think goodmark will, but not 'till later next year, but price for them won't be cheap, we're better off getting ol' original ones, which will always fit

cole · 01-01-2003, 06:45 PM

I had a hard time finding a fender, but my brother in law found one in Modesto, Ca. The guy wanted my old one plus $200.00. It hurt but it was in perfect shape. They only make fiberglass ones new, but a company in Orange, Ca should have them soon this year. I would wait for the new ones if you can. I looked all over Arizona and there was nothing.

Take care, Cole

Riles72 · 01-01-2003, 06:57 PM

I needed a new fender for my bed, driver's side I think. The one I had was creased up and had a huge rip down it. It would've taken a long time to fix. Anyways, I found a guy in Guthrie, oklahoma that wanted to get rid of a few fenders. all I needed was the one, and we ended up paying the guy 20 bucks for an original fender! I couldn't believe it! it only had 1 rust spot! it was actually easier to fix than the original one! Now I've got a fuel door in the back of it since I got the blazer tank..
All I'd be able to tell you is check the little "freebie" classified papers like you can get at restraunts and hotels. that's where i found my bed and fenders. 20 bucks for the fenders, 100 bucks for a complete bed. I made my money back just selling the tailgate (it was a gmc bed). I think we sold the gmc stepside tailgate for around 150 bucks. not a bad deal if ya ask me...

Riley

RON WOODGEARD · 01-01-2003, 07:16 PM

RILEY,

You stole yours man.. Cool find.

MUCKYP,

Around here "IF" (I kept my eyes open for 5 years) you can find a stepside drivers side w/o cutout it'll run you $300.00 to $500.00 depending on condition. I got mine from TXGARY (here on this board) It was drivers w/o cutout, No dents or even dings and no rust, I paid $150.00 + crating/shipping and I really thought that was a find. You might want to check him out, he parts these things to help afford his.

If I can find a short wide box I'll part with both of mine.

RON

cole · 01-08-2003, 11:45 AM

Here is the number for the truck shop. In the catalogue it said coming soon, stepside fenders. 1-800-chevy-47 (243-8947).
Hope this helps.

Take care, Cole

12-28-2002, 01:03 AM	#1
muckyp Registered User Join Date: Mar 2001 Location: Forney, Texas Posts: 290	SWB Stepside Fenders Can someone tell me if anyone makes stepside fenders for these trucks? Or maybe does anyone have a drivers side fender without the spare tire notch they would like to get rid of cheap? Thanks

12-28-2002, 01:15 AM	#2
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Aftermarket stepside fenders are only made of fiberglass, nobody makes'em from steel, at least not yet, you can get used ones in good condition anywhere around 100 bucks and up __________________ Paul How do you make the invisible, visible?.........You take it away.

12-28-2002, 01:16 AM	#3
jku72 Registered User Join Date: Jan 2002 Location: cornville, maine Posts: 659	try the parts board. If somebody has one, there is the place, just start a WTB fender thread. __________________ jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers

12-28-2002, 12:35 PM	#5
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	I think goodmark will, but not 'till later next year, but price for them won't be cheap, we're better off getting ol' original ones, which will always fit __________________ Paul How do you make the invisible, visible?.........You take it away.

01-01-2003, 06:45 PM	#6
cole Registered User Join Date: Aug 2002 Location: AZ Posts: 17	Stepfender I had a hard time finding a fender, but my brother in law found one in Modesto, Ca. The guy wanted my old one plus $200.00. It hurt but it was in perfect shape. They only make fiberglass ones new, but a company in Orange, Ca should have them soon this year. I would wait for the new ones if you can. I looked all over Arizona and there was nothing. Take care, Cole

12-28-2002, 10:52 AM	#4
Lightspeed Registered User Join Date: Oct 2002 Location: Virginia Posts: 226	isn't goodmark sposed to start making them soon?

01-01-2003, 06:57 PM	#7
Riles72 Registered User Join Date: Feb 2000 Location: Chickasha, Oklahoma Posts: 117	I got lucky!! I needed a new fender for my bed, driver's side I think. The one I had was creased up and had a huge rip down it. It would've taken a long time to fix. Anyways, I found a guy in Guthrie, oklahoma that wanted to get rid of a few fenders. all I needed was the one, and we ended up paying the guy 20 bucks for an original fender! I couldn't believe it! it only had 1 rust spot! it was actually easier to fix than the original one! Now I've got a fuel door in the back of it since I got the blazer tank.. All I'd be able to tell you is check the little "freebie" classified papers like you can get at restraunts and hotels. that's where i found my bed and fenders. 20 bucks for the fenders, 100 bucks for a complete bed. I made my money back just selling the tailgate (it was a gmc bed). I think we sold the gmc stepside tailgate for around 150 bucks. not a bad deal if ya ask me... Riley __________________ 72 Chevy short stepside 350/350 tilt, vintage air a/c sunset Orange Metallic paint Early Classic 2.5/4 drop eagle series 211 wheels

01-01-2003, 07:16 PM	#8
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	RILEY, You stole yours man.. Cool find. MUCKYP, Around here "IF" (I kept my eyes open for 5 years) you can find a stepside drivers side w/o cutout it'll run you $300.00 to $500.00 depending on condition. I got mine from TXGARY (here on this board) It was drivers w/o cutout, No dents or even dings and no rust, I paid $150.00 + crating/shipping and I really thought that was a find. You might want to check him out, he parts these things to help afford his. If I can find a short wide box I'll part with both of mine. RON

01-08-2003, 11:45 AM	#9
cole Registered User Join Date: Aug 2002 Location: AZ Posts: 17	Here is the number for the truck shop. In the catalogue it said coming soon, stepside fenders. 1-800-chevy-47 (243-8947). Hope this helps. Take care, Cole



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.