Linex in blazer? anyone done it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlazerWA · 11-18-2007, 10:28 PM

Hey im thinking of putting linex in my 72 blazer...maybe even around the passenger area in ft...has anyone done it? bad idea? If not, wheres the best place to buy carpet, or is that poly rubber stuff better...thanks!! heres my ride[IMG]

[/IMG]

Thealien · 11-19-2007, 01:25 PM

There have been a couple of discussions about it. Some feel like it is hiding something and would never buy a truck with it done? Some say it would hurt value? I have a 1972 GMC Jimmy that was 95% rust free and am having that professionally repaired right now. I plan on having this as a top off summer toy that will get caught in the rain. I am seriously considering lineX the entire interior for weather/rust protection. I don't really plan on ever selling my Jimmy, I would just lose money anyway.

If I do it this spring I'll let you know what I think.

72BlazerWA · 11-19-2007, 01:52 PM

yeah the bed in mine doesnt have any rust at all, I would just do it for protection as well as sound deadening...what has anyone else done for floor covering to deaden sound and strengthen appeal? any suggestions? thanks...

5150 · 11-19-2007, 02:44 PM

I'm doing it in mine, but haven't done it yet. I hear that opinion about the resell value, you do what you want. Line-x will probably make it last longer.

vtblazer · 11-19-2007, 05:11 PM

Quote:

Originally Posted by 72BlazerWA

yeah the bed in mine doesnt have any rust at all, I would just do it for protection as well as sound deadening...what has anyone else done for floor covering to deaden sound and strengthen appeal? any suggestions? thanks...

Not much of a sound deadener IMO.

My off road blazer has it and it's deffinetly sweet, get muddy and rinse.

35spline · 11-23-2007, 08:40 PM

I have it on my 69 Blazer and like it. If you go this route I would suggest changing your body mounts before they spray it so you won't have to cut it to get to the bolts.

72BlazerWA · 11-23-2007, 08:43 PM

why change the body mounts? side note, I love that bikini top! where did u get it? u dont by chance have another one do u?

bouncytruck · 11-23-2007, 10:57 PM

The original body mounts are rubber and tend to decay. Shot body mounts will cause sag in the body making the doors harder to close and the hard top harder to put on.

Yukon Jack organized a group buy on bikini tops. Ya might check with him to see who made them or if there are any left over.

72BlazerWA · 11-23-2007, 10:59 PM

where would I get body mounts and are they hard to install? bouncytruck, you dont by chance have a soft top for sale do u? I hear your name mentioned with soft tops, anyways, your pretty close, tht id ask...thanks!

**FRENCHBLUE72** · 11-24-2007, 02:41 PM

Just make sure you go with a good spray on line.. I used cheap stuff and it sucks...duplicolor does not work..

DURRTY · 11-24-2007, 03:27 PM

Quote:

Originally Posted by 35spline

I have it on my 69 Blazer and like it. If you go this route I would suggest changing your body mounts before they spray it so you won't have to cut it to get to the bolts.

nice looking rig !! do you have any pics of the liner closer up?

jaros44sr · 11-24-2007, 03:35 PM

Quote:

Originally Posted by 35spline

I have it on my 69 Blazer and like it. If you go this route I would suggest changing your body mounts before they spray it so you won't have to cut it to get to the bolts.

Start thread so we can all see lots of pics....I've been trying to decide on mirrors, and I think I just found the answer, are they available as repros? J.

Big J · 11-24-2007, 08:36 PM

I'm going to use it on mine. The entire interior, short of the dash. I did the lower half of my Dodge with the roll on stuff made by Bondo about 2 years ago. Still looks good. When its clean

35spline · 11-30-2007, 11:39 PM

Quote:

Originally Posted by DURRTY

nice looking rig !! do you have any pics of the liner closer up?

I don't think I have any close up pics of the bed liner but I can tell you that I am real happy with the way it turned out.

35spline · 11-30-2007, 11:55 PM

Quote:

Originally Posted by jaros44sr

Start thread so we can all see lots of pics....I've been trying to decide on mirrors, and I think I just found the answer, are they available as repros? J.

I believe I got the mirrors from Classic Industries or maybe LMC Trucks? Start a thread? Ok, but I will not have any time until the end of Dec 07. Also someone asked about my top. It was homemade.

jaros44sr · 12-01-2007, 07:44 AM

Quote:

Originally Posted by 35spline

I believe I got the mirrors from Classic Industries or maybe LMC Trucks? Start a thread? Ok, but I will not have any time until the end of Dec 07. Also someone asked about my top. It was homemade.

Thanks for they info. on the mirrors. Didn't know the were repro'd...

I did my front floors with Herculiner, if you have pics. of before and after can't see where it would hurt resale, unless the new owner wants the stock look. It's got to hold up better than paint

**Classic Bowties** · 12-01-2007, 02:29 PM

Quote:

Originally Posted by 72BlazerWA

Hey im thinking of putting linex in my 72 blazer...maybe even around the passenger area in ft...has anyone done it? bad idea? If not, wheres the best place to buy carpet, or is that poly rubber stuff better...thanks!!

I like it alot when its clean, here are a couple pics of my 72 K/5 that was line-x'ed in 2000, did the complete inner bare tub from rear gate to Fwd. top of backside of firewall. It is holding up great and makes cleanup after a weekend of play a snap. As far as it hurting the overall value of your truck, I dont feel that it does if a true quality job shop and product are used. I have turned down a few very serious (had to think about) cash offers over the last couple of years and remember this... if you grow tired of the line-x or decide on a change, a rubber mat and pad or even a complete carpet kit could easily be layed over the top of it. The pictured instrument bezel and chrome plated glove door faces were also done in line-x. Cb

ColoradoK5 · 12-01-2007, 02:53 PM

I think that it looks sweet! Makes me want to do mine.

5150 · 12-01-2007, 03:11 PM

Looks great. Thanks for the instrument panel and glove box idea. I'll have to do that when I do my roadster.

vtblazer · 12-01-2007, 05:04 PM

Quote:

Originally Posted by Classic Bowties

I like it alot when its clean, here are a couple pics of my 72 K/5 that was line-x'ed in 2000, did the complete inner bare tub from rear gate to Fwd. top of backside of firewall. It is holding up great and makes cleanup after a weekend of play a snap. As far as it hurting the overall value of your truck, I dont feel that it does if a true quality job shop and product are used. I have turned down a few very serious (had to think about) cash offers over the last couple of years and remember this... if you grow tired of the line-x or decide on a change, a rubber mat and pad or even a complete carpet kit could easily be layed over the top of it. The pictured instrument bezel and chrome plated glove door faces were also done in line-x. Cb

Any outside/whole blazer pics?

Looks amazing from the inside, has all the right goodies.

badpeanut · 12-01-2007, 10:02 PM

Quote:

Originally Posted by vtblazer

Any outside/whole blazer pics?

2X! Nice Blazer!

11-18-2007, 10:28 PM	#1
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Linex in blazer? anyone done it? Hey im thinking of putting linex in my 72 blazer...maybe even around the passenger area in ft...has anyone done it? bad idea? If not, wheres the best place to buy carpet, or is that poly rubber stuff better...thanks!! heres my ride[IMG][/IMG]

11-19-2007, 01:25 PM	#2
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,122	Re: Linex in blazer? anyone done it? There have been a couple of discussions about it. Some feel like it is hiding something and would never buy a truck with it done? Some say it would hurt value? I have a 1972 GMC Jimmy that was 95% rust free and am having that professionally repaired right now. I plan on having this as a top off summer toy that will get caught in the rain. I am seriously considering lineX the entire interior for weather/rust protection. I don't really plan on ever selling my Jimmy, I would just lose money anyway. If I do it this spring I'll let you know what I think.

11-19-2007, 01:52 PM	#3
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: Linex in blazer? anyone done it? yeah the bed in mine doesnt have any rust at all, I would just do it for protection as well as sound deadening...what has anyone else done for floor covering to deaden sound and strengthen appeal? any suggestions? thanks...

11-19-2007, 02:44 PM	#4
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Linex in blazer? anyone done it? I'm doing it in mine, but haven't done it yet. I hear that opinion about the resell value, you do what you want. Line-x will probably make it last longer. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

11-23-2007, 08:40 PM	#6
35spline Registered User Join Date: Dec 2006 Location: Murphy, TX Posts: 19	Re: Linex in blazer? anyone done it? I have it on my 69 Blazer and like it. If you go this route I would suggest changing your body mounts before they spray it so you won't have to cut it to get to the bolts.

11-23-2007, 08:43 PM	#7
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: Linex in blazer? anyone done it? why change the body mounts? side note, I love that bikini top! where did u get it? u dont by chance have another one do u?

11-23-2007, 10:57 PM	#8
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Re: Linex in blazer? anyone done it? The original body mounts are rubber and tend to decay. Shot body mounts will cause sag in the body making the doors harder to close and the hard top harder to put on. Yukon Jack organized a group buy on bikini tops. Ya might check with him to see who made them or if there are any left over. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

11-23-2007, 10:59 PM	#9
72BlazerWA Registered User Join Date: Nov 2007 Location: Friday Harbor Posts: 113	Re: Linex in blazer? anyone done it? where would I get body mounts and are they hard to install? bouncytruck, you dont by chance have a soft top for sale do u? I hear your name mentioned with soft tops, anyways, your pretty close, tht id ask...thanks!

11-24-2007, 02:41 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: Linex in blazer? anyone done it? Just make sure you go with a good spray on line.. I used cheap stuff and it sucks...duplicolor does not work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-24-2007, 08:36 PM	#13
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Linex in blazer? anyone done it? I'm going to use it on mine. The entire interior, short of the dash. I did the lower half of my Dodge with the roll on stuff made by Bondo about 2 years ago. Still looks good. When its clean Attached Images __________________ BAZINGA! My Build Last edited by Big J; 11-24-2007 at 08:38 PM.

12-01-2007, 02:53 PM	#18
ColoradoK5 Registered User Join Date: Jan 2007 Location: Denver Colorado Posts: 608	Re: Linex in blazer? anyone done it? I think that it looks sweet! Makes me want to do mine.

12-01-2007, 03:11 PM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Linex in blazer? anyone done it? Looks great. Thanks for the instrument panel and glove box idea. I'll have to do that when I do my roadster. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.