lq4 Motor, Tranny, Computer, and Harness $3500 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigo181979 · 11-18-2007, 11:34 AM

Quote:

Originally Posted by IvelDesigns

Are these the LQ4 or LQ9 engines? Would you consider selling one w/o the tranny/xfer case?

I have no need for a 4wd setup.

All of them are LQ4 motors w/ the 4L65E tranny's, and I am not intrested in seperating the sets right now.

XXL · 11-18-2007, 03:30 PM

Can you post some motor numbers? You list them as LS1's, then you tell us they're 6.0L motors, then they may be LQ4's.

bigo181979 · 11-18-2007, 04:34 PM

They are the 6.0L lq4 motor out of the hummer h2's 300hp with the 4L65e tranny. Some one had told me that they were also called an LS1 but those are the 5.7 motors, in any case they are the motorsout of 04-06 H2 Hummers, and they are all LQ'4s.
Sorry for the confusion.

killer71 · 11-21-2007, 01:02 PM

disregard my earlier requests for picts. i am no longer interested. I have 2 on the way. Thankx!

bigo181979 · 11-23-2007, 07:14 PM

new post

**clay68c10** · 11-24-2007, 05:16 PM

That's a DEAL! Too bad this didn't pop up 2 years ago when I was debating whether or not to build my 454.

jay6891 · 11-26-2007, 01:20 PM

Just saw a thing on CNN about some company in Witchta doing these conversions. This yall?

bigo181979 · 11-26-2007, 04:52 PM

Yeah thats us, well part of us anyway we have hlineconversion.com and mashmotorsinc.com. We do the wild stuff at hline and just the basic conversions at mash. The hline shop is the one you saw on TV.

smoky02 · 11-30-2007, 10:21 PM

The reason that you were told that it's an LS1 motor is that it uses the same block as an LS1. The LQ4, LQ9, and the LR4, and so furth all use the same block, the differences are the cams, stroke and bore. That's why the GTO and 6.0 Vette motors are considered LS1 motors.

Just my .02 cents.

Also bump for you.

faribran · 11-30-2007, 10:49 PM

hey bud

bigo181979 · 12-01-2007, 08:58 AM

Quote:

Originally Posted by faribran

hey bud

Whats up???

smoky02 · 12-01-2007, 05:05 PM

I'm sorry about the confusion big....Faribran is my dad...LOL

bigo181979 · 12-01-2007, 05:56 PM

Ok makes sense now.

smoky02 · 12-01-2007, 07:01 PM

LOL...I thought you might be a bit lost...I'm military and deployed to Afganistan

faribran · 12-01-2007, 11:33 PM

Bud, i wondered if u would see this...

Pap

11-18-2007, 03:30 PM	#27
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 Can you post some motor numbers? You list them as LS1's, then you tell us they're 6.0L motors, then they may be LQ4's. __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter

11-18-2007, 04:34 PM	#28
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: LS-1 Motor, Tranny, Computer, and Harness $3500 They are the 6.0L lq4 motor out of the hummer h2's 300hp with the 4L65e tranny. Some one had told me that they were also called an LS1 but those are the 5.7 motors, in any case they are the motorsout of 04-06 H2 Hummers, and they are all LQ'4s. Sorry for the confusion.

11-21-2007, 01:02 PM	#29
killer71 Registered User Join Date: May 2006 Location: at work Posts: 2,552	Re: lq4 Motor, Tranny, Computer, and Harness $3500 disregard my earlier requests for picts. i am no longer interested. I have 2 on the way. Thankx! __________________ R.I.P. Killer 71 10/26/07

11-23-2007, 07:14 PM	#30
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: lq4 Motor, Tranny, Computer, and Harness $3500 new post Last edited by bigo181979; 12-06-2007 at 03:44 PM.

11-24-2007, 05:16 PM	#31
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: lq4 Motor, Tranny, Computer, and Harness $3500 That's a DEAL! Too bad this didn't pop up 2 years ago when I was debating whether or not to build my 454. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-26-2007, 01:20 PM	#32
jay6891 Car Knocker Join Date: May 2001 Location: jefferson,arkansas Posts: 664	Re: lq4 Motor, Tranny, Computer, and Harness $3500 Just saw a thing on CNN about some company in Witchta doing these conversions. This yall? __________________ 68 c-10,91 sportside bed,350 .030 over,4 bolt,10-1 comp,2.05 intake/1.94 exhaust,1.6 Harland Sharp roller rockers,edelbrock rpm cam and intake w/750 carb, 700r4, 3.73 gears,Jacabbs Electronic Igntion w/Accel HEI distributer and super coil. ZR-1 roll pan, filled tailights. Blazer tank. Hidden hitch. 2 1/2" Flowmaster 40's. Parts bought but not installed>> ford 9" posi with disc. CCP front and rear lowering kit 4/5. Cab corners,foor boards,rockers, cab braces, Phatom grill, Painless wiring kit.

11-26-2007, 04:52 PM	#33
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: lq4 Motor, Tranny, Computer, and Harness $3500 Yeah thats us, well part of us anyway we have hlineconversion.com and mashmotorsinc.com. We do the wild stuff at hline and just the basic conversions at mash. The hline shop is the one you saw on TV.

11-30-2007, 10:21 PM	#34
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: lq4 Motor, Tranny, Computer, and Harness $3500 The reason that you were told that it's an LS1 motor is that it uses the same block as an LS1. The LQ4, LQ9, and the LR4, and so furth all use the same block, the differences are the cams, stroke and bore. That's why the GTO and 6.0 Vette motors are considered LS1 motors. Just my .02 cents. Also bump for you. __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

11-30-2007, 10:49 PM	#35
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: lq4 Motor, Tranny, Computer, and Harness $3500 hey bud __________________ "

12-01-2007, 05:05 PM	#37
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: lq4 Motor, Tranny, Computer, and Harness $3500 I'm sorry about the confusion big....Faribran is my dad...LOL __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

12-01-2007, 05:56 PM	#38
bigo181979 Junior Member Join Date: Jan 2007 Location: wichita, ks Posts: 242	Re: lq4 Motor, Tranny, Computer, and Harness $3500 Ok makes sense now.

12-01-2007, 07:01 PM	#39
smoky02 Registered User Join Date: Oct 2003 Location: Sunny, Florida, some might call it South Alabama Posts: 834	Re: lq4 Motor, Tranny, Computer, and Harness $3500 LOL...I thought you might be a bit lost...I'm military and deployed to Afganistan __________________ Just sold my C10...sad day... Looking for a 1972 Blazer to hopefully fill the hole in my heart.

12-01-2007, 11:33 PM	#40
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: lq4 Motor, Tranny, Computer, and Harness $3500 Bud, i wondered if u would see this... Pap __________________ "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.