Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alvin · 11-02-2007, 03:19 PM

I've decided it's time to sell off some of the extra stuff that is filling up my garage. Below is my price list, if I'm asking too much for some things, I guess they won't sell here. I will entertain offers, but my next stop will be craigslist. Looking for local pick-up only on these items.

68 Chevy Grille - real nice shape, stripped to bare metal and primed - $100

68 Driver's side fender - stripped to bare metal and primed, dent near rear edge, by door - $75

Another Pic
Another Pic
Another Pic

68 Pass side fender - stripped to bare metal and primed, dented and battery rusted front cup completely through - $25

Another Pic
Another Pic
Another Pic
Another Pic
Another Pic

68 GMC hood - decent shape, no major damage or rust anywhere, has holes for GMC letters and front edge molding - $100

68 GMC tailgate - fleetside, nice driver, stripped and primed, few dents, bowed just a little bit - $100

Tailgate Pic 2
Tailgate Pic 3
Tailgate Pic 4
Tailgate Pic 5
Tailgate Pic 6
Tailgate Pic 7
Tailgate Pic 8
Tailgate Pic 9

68 GMC Cab w/ wiper cowl - real solid, from Texas, non-a/c (although has holes cut for the ball vents on each side), mostly stripped and primed. Needs rockers (few holes), 1 cab corner (dented, not really rusted), and a little other work. Can get pics. Comes with clear Ohio title. Wiper cowl is nice. Doors have been sold! - $650

Cab Pic 3
Cab Pic 4
Cab Pic 5
Cab Pic 6
Cab Pic 7
Cab Pic 8
Cab Pic 9
Cab Pic 10
Cab Pic 11
Cab Pic 12
Cab Pic 13
Cab Pic 14

68 Short fleet bed - SOLD on craigslist

350 Engine/TH350 Tranny combo - Came in "Ethel", still on frame, I drove it a mile, and it might need a little trans work, ran fine, never smoked or sputtered. - $600

350 4 bolt Core - crank, rods, pistons, block and heads (still assembled for the most part), late 80's crate motor, virgin block - $100

Please respond in thread, I can't keep track otherwise. I will post pics of some items when I get home, other items as they are requested/time allows. All items are from truck pictured below!

Thanks for looking!

**lks dcvn** · 11-02-2007, 03:48 PM

PM sent.

meathead95 · 11-02-2007, 04:24 PM

interested in fenders and grill what would shipping be to 37180?

Alvin · 11-02-2007, 09:46 PM

Sorry meathead95, only going with local pick-up this time around. If I have trouble getting rid of some stuff, shipping might be available in the future.

scrapmetalart · 11-03-2007, 11:45 PM

can I see pics of the hood & grill?

do I need the 68 core support if changing from 69 to 68 frontend?

**special-K** · 11-04-2007, 08:46 AM

I`m interested in the bed.Can I get pictures of the floor condition?

69ShortStep · 11-04-2007, 09:01 AM

Need a passenger door. If you will separate, please provide pics and price of the passenger door.

Alvin · 11-04-2007, 12:16 PM

scrapmetalart - PM sent

special-K - I will be able to get pics of the bed floor tomorrow.

69ShortStep - I have one person interested in the cab, let me see if he was interested in the doors as well. I will let you know.

Thanks everyone!

Alvin · 11-05-2007, 08:17 PM

Grill:

Put the big parts on a rolling chassis I've got, so I can get to work sorting out the rest of my garage.

I've added a bunch of pics to this gallery:
http://newt0.com/simplegal/view/Parts+for+sale/

I know it's hard to sort through, so feel free to ask for pics still. If you need to see anything else, let me know.

Alvin · 11-07-2007, 07:23 PM

TTT

Thursday I'll list the cab and bed on the Cincinnati craigslist!

*b-rad* · 11-13-2007, 10:32 PM

i would like to have the 4 bolt eng and both finders but im in iraq any thing we can work out im in the army should be out here in 7 months thanks alot

Big J · 11-14-2007, 07:07 AM

Put me in line for both doors.
pm sent

Alvin · 12-03-2007, 03:50 PM

TTT

Doors have been sold!

Thanks Jason!

Big J · 12-03-2007, 07:21 PM

It was good to see ya again and thanks for the deal on some great doors.

Fellas, I checked out the bed and it is sweet. If anyone is in need of a solid SWB then this is the one for you. Its a hell of a deal.......

11-02-2007, 03:19 PM	#1
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH I've decided it's time to sell off some of the extra stuff that is filling up my garage. Below is my price list, if I'm asking too much for some things, I guess they won't sell here. I will entertain offers, but my next stop will be craigslist. Looking for local pick-up only on these items. 68 Chevy Grille - real nice shape, stripped to bare metal and primed - $100 68 Driver's side fender - stripped to bare metal and primed, dent near rear edge, by door - $75 Another Pic Another Pic Another Pic 68 Pass side fender - stripped to bare metal and primed, dented and battery rusted front cup completely through - $25 Another Pic Another Pic Another Pic Another Pic Another Pic 68 GMC hood - decent shape, no major damage or rust anywhere, has holes for GMC letters and front edge molding - $100 68 GMC tailgate - fleetside, nice driver, stripped and primed, few dents, bowed just a little bit - $100 Tailgate Pic 2 Tailgate Pic 3 Tailgate Pic 4 Tailgate Pic 5 Tailgate Pic 6 Tailgate Pic 7 Tailgate Pic 8 Tailgate Pic 9 68 GMC Cab w/ wiper cowl - real solid, from Texas, non-a/c (although has holes cut for the ball vents on each side), mostly stripped and primed. Needs rockers (few holes), 1 cab corner (dented, not really rusted), and a little other work. Can get pics. Comes with clear Ohio title. Wiper cowl is nice. Doors have been sold! - $650 Cab Pic 3 Cab Pic 4 Cab Pic 5 Cab Pic 6 Cab Pic 7 Cab Pic 8 Cab Pic 9 Cab Pic 10 Cab Pic 11 Cab Pic 12 Cab Pic 13 Cab Pic 14 68 Short fleet bed - SOLD on craigslist 350 Engine/TH350 Tranny combo - Came in "Ethel", still on frame, I drove it a mile, and it might need a little trans work, ran fine, never smoked or sputtered. - $600 350 4 bolt Core - crank, rods, pistons, block and heads (still assembled for the most part), late 80's crate motor, virgin block - $100 Please respond in thread, I can't keep track otherwise. I will post pics of some items when I get home, other items as they are requested/time allows. All items are from truck pictured below! Thanks for looking! Attached Images __________________ Ethel - The Legend Continues... Ethel has been sold. Last edited by Alvin; 12-22-2007 at 05:12 PM. Reason: Bed has been sold

11-02-2007, 03:48 PM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,339	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH PM sent.

11-02-2007, 04:24 PM	#3
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH interested in fenders and grill what would shipping be to 37180? __________________ 72 2wd blazer 72 swb 4x4

11-02-2007, 09:46 PM	#4
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH Sorry meathead95, only going with local pick-up this time around. If I have trouble getting rid of some stuff, shipping might be available in the future. __________________ Ethel - The Legend Continues... Ethel has been sold.

11-03-2007, 11:45 PM	#5
scrapmetalart Junior Member Join Date: Mar 2007 Location: DAYTON Posts: 505	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH can I see pics of the hood & grill? do I need the 68 core support if changing from 69 to 68 frontend? __________________ frontstreetcycle on Instagram

11-04-2007, 08:46 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH I`m interested in the bed.Can I get pictures of the floor condition? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-04-2007, 09:01 AM	#7
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH Need a passenger door. If you will separate, please provide pics and price of the passenger door.

11-04-2007, 12:16 PM	#8
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH scrapmetalart - PM sent special-K - I will be able to get pics of the bed floor tomorrow. 69ShortStep - I have one person interested in the cab, let me see if he was interested in the doors as well. I will let you know. Thanks everyone! __________________ Ethel - The Legend Continues... Ethel has been sold.

11-05-2007, 08:17 PM	#9
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH Grill: Put the big parts on a rolling chassis I've got, so I can get to work sorting out the rest of my garage. I've added a bunch of pics to this gallery: http://newt0.com/simplegal/view/Parts+for+sale/ I know it's hard to sort through, so feel free to ask for pics still. If you need to see anything else, let me know. __________________ Ethel - The Legend Continues... Ethel has been sold.

11-07-2007, 07:23 PM	#10
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH TTT Thursday I'll list the cab and bed on the Cincinnati craigslist! __________________ Ethel - The Legend Continues... Ethel has been sold.

11-13-2007, 10:32 PM	#11
b-rad Account Suspended Join Date: Nov 2007 Location: FT STEWART GA Posts: 509	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH i would like to have the 4 bolt eng and both finders but im in iraq any thing we can work out im in the army should be out here in 7 months thanks alot

11-14-2007, 07:07 AM	#12
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH Put me in line for both doors. pm sent __________________ BAZINGA! My Build Last edited by Big J; 11-14-2007 at 07:12 AM.

12-03-2007, 03:50 PM	#13
Alvin Never Done? Join Date: May 2000 Location: Ohio Posts: 1,435	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH TTT Doors have been sold! Thanks Jason! __________________ Ethel - The Legend Continues... Ethel has been sold.

12-03-2007, 07:21 PM	#14
Big J Its lookin' like a Blazer! Join Date: Aug 2003 Location: Gods Country, KY Posts: 1,773	Re: Cab, doors, SWB, Fenders, 350/TH350 Cincinnati, OH It was good to see ya again and thanks for the deal on some great doors. Fellas, I checked out the bed and it is sweet. If anyone is in need of a solid SWB then this is the one for you. Its a hell of a deal....... __________________ BAZINGA! My Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.