250, 3 speed parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shaneschevys · 11-12-2007, 02:34 PM

All of this came out of my 69 panel
250 i was told it was knocking 50.00 no shipping
3 speed, bell housing, & starter 75.00 no shipping
3 speed column 50.00 no shipping
Intake/exhaust manifold 25.00 no shipping
Clutch rod, z bracket, spring, engine & frame brackets 30.00 shipped to you sold
Double groove pully 20.00 shipped to you sold
Alt brackets 15.00 shipped to you
Water neck 15.00 shipped to you sold
Carb spacer 15.00 shipped to you sold
Throttle linkage 15.00 shipped to yousold
Man steering gear box 20.00 no shipping
If the prices are to high make me an offer.

shaneschevys · 11-12-2007, 02:36 PM

more pics

qksilver · 11-12-2007, 09:13 PM

If you take pay pal, I would be interested in the clutch and throttle stuff. Pm me, I tend to forget.
Thanks,
Steve

shaneschevys · 11-13-2007, 12:09 AM

Quote:

Originally Posted by qksilver

If you take pay pal, I would be interested in the clutch and throttle stuff. Pm me, I tend to forget.
Thanks,
Steve

PM sent

Luvlegs · 11-14-2007, 12:57 PM

Do you have the tranny dust cover (covers the ring gear)?

shaneschevys · 11-14-2007, 01:11 PM

Quote:

Originally Posted by Luvlegs

Do you have the tranny dust cover (covers the ring gear)?

Do you need both parts? how about 20.00 shipped for both pieces.

Mt Man Chad · 11-14-2007, 01:59 PM

I'm interested in the carb spacer and breather tube water neck. Also the upper Alternator/power steering bracket.

Any chance of selling/shipping the 153 tooth flywheel or starter?

shaneschevys · 11-14-2007, 02:16 PM

Quote:

Originally Posted by Mt Man Chad

I'm interested in the carb spacer and breather tube water neck. Also the upper Alternator/power steering bracket.

Any chance of selling/shipping the 153 tooth flywheel or starter?

PM sent

Luvlegs · 11-14-2007, 04:13 PM

Quote:

Originally Posted by shaneschevys

Do you need both parts? how about 20.00 shipped for both pieces.

Now I feel "uneducated" - I'm not sure as there was never one on mine - when I look at my oil pan from the front, there is no cover on the underside of the bellhousing and I can see the ring gear - What would the two pieces you have be?

shaneschevys · 11-15-2007, 11:59 AM

ttt

Dale99 · 11-22-2007, 10:12 PM

double grove water pump pully? Please pm me if you have one.

MikeN · 11-23-2007, 10:47 AM

I'm interested in the shift linkage and the levers on the side of the tranny, if you want to sell them, you can PM me.

Luvlegs · 11-23-2007, 12:48 PM

Still would like the covers - can you show me what they are?

shaneschevys · 11-27-2007, 12:53 PM

Here is a pic of the cover. It bolts up between the flywheel & the oil pan.

Dale99 pm sent

MikeN pm sent

shaneschevys · 11-28-2007, 10:50 AM

ttt

Luvlegs · 11-28-2007, 11:30 AM

sending PM

(paypal went to)

bean · 11-28-2007, 12:24 PM

if that cover between the flywheel and oil pan is still available i'll take it. I'll be in fort worth friday i could pick it up from you. Just let me know. Thanks

ebfabman · 11-28-2007, 01:40 PM

....3 speed column & linkage........

I'm interested in knowing the condition of the shifting column. I have 2 that are so worn out, they're not worth rebuilding. Were you able to drive the truck with the 3speed in it?

shaneschevys · 11-28-2007, 02:08 PM

Bean the covers are sold

ebfabman I am unsure of the condition on the shifting mech. in the column. I didnt get to drive the truck. The linkage is also sold.

bean · 11-28-2007, 05:47 PM

shane
if you come across another one of those shields the goes between the pan and the flywheel i'll take it. Thanks.
bean

Dale99 · 11-28-2007, 05:49 PM

just got msg today, pm sent back

shaneschevys · 11-29-2007, 01:05 AM

Quote:

Originally Posted by bean

shane
if you come across another one of those shields the goes between the pan and the flywheel i'll take it. Thanks.
bean

I think i may have another one at my other place. I will check and see and get back with you.

shaneschevys · 12-06-2007, 02:04 PM

ttt

11-12-2007, 02:34 PM	#1
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	250, 3 speed parts All of this came out of my 69 panel 250 i was told it was knocking 50.00 no shipping 3 speed, bell housing, & starter 75.00 no shipping 3 speed column 50.00 no shipping Intake/exhaust manifold 25.00 no shipping Clutch rod, z bracket, spring, engine & frame brackets 30.00 shipped to you sold Double groove pully 20.00 shipped to you sold Alt brackets 15.00 shipped to you Water neck 15.00 shipped to you sold Carb spacer 15.00 shipped to you sold Throttle linkage 15.00 shipped to yousold Man steering gear box 20.00 no shipping If the prices are to high make me an offer. Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club** Last edited by shaneschevys; 12-06-2007 at 02:02 PM.

11-12-2007, 02:36 PM	#2
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts more pics Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club** Last edited by shaneschevys; 11-12-2007 at 02:44 PM.

11-12-2007, 09:13 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 250, 3 speed parts If you take pay pal, I would be interested in the clutch and throttle stuff. Pm me, I tend to forget. Thanks, Steve

11-14-2007, 12:57 PM	#5
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 250, 3 speed parts Do you have the tranny dust cover (covers the ring gear)? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

11-14-2007, 01:59 PM	#7
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 250, 3 speed parts I'm interested in the carb spacer and breather tube water neck. Also the upper Alternator/power steering bracket. Any chance of selling/shipping the 153 tooth flywheel or starter? __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 11-14-2007 at 02:01 PM.

11-15-2007, 11:59 AM	#10
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-22-2007, 10:12 PM	#11
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 250, 3 speed parts double grove water pump pully? Please pm me if you have one.

11-23-2007, 10:47 AM	#12
MikeN Registered User Join Date: Oct 2007 Location: Marietta, GA Posts: 805	Re: 250, 3 speed parts I'm interested in the shift linkage and the levers on the side of the tranny, if you want to sell them, you can PM me.

11-23-2007, 12:48 PM	#13
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 250, 3 speed parts Still would like the covers - can you show me what they are? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

11-27-2007, 12:53 PM	#14
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts Here is a pic of the cover. It bolts up between the flywheel & the oil pan. Dale99 pm sent MikeN pm sent Attached Images __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-28-2007, 10:50 AM	#15
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

11-28-2007, 11:30 AM	#16
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 250, 3 speed parts sending PM (paypal went to) __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 11-28-2007 at 01:42 PM.

11-28-2007, 12:24 PM	#17
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: 250, 3 speed parts if that cover between the flywheel and oil pan is still available i'll take it. I'll be in fort worth friday i could pick it up from you. Just let me know. Thanks

11-28-2007, 01:40 PM	#18
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	Re: 250, 3 speed parts ....3 speed column & linkage........ I'm interested in knowing the condition of the shifting column. I have 2 that are so worn out, they're not worth rebuilding. Were you able to drive the truck with the 3speed in it?

11-28-2007, 02:08 PM	#19
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts Bean the covers are sold ebfabman I am unsure of the condition on the shifting mech. in the column. I didnt get to drive the truck. The linkage is also sold. __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**



Register or Log In To remove these advertisements.

11-28-2007, 05:47 PM	#20
bean Registered User Join Date: Jun 2002 Location: Fort Worth, TX Posts: 920	Re: 250, 3 speed parts shane if you come across another one of those shields the goes between the pan and the flywheel i'll take it. Thanks. bean

11-28-2007, 05:49 PM	#21
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 250, 3 speed parts just got msg today, pm sent back

12-06-2007, 02:04 PM	#23
shaneschevys Its always something! Join Date: Aug 2005 Location: FT Worth,TX Posts: 4,992	Re: 250, 3 speed parts ttt __________________ 79 p10 stepvan 72 Short Fleetside 72 Suburban 67 GMC One Ton Flatbed 64 Short Fleetside 57 Chevy 2DR Hard Top 57 Chevy 2dr wagon 65 f* short fleet 63 C 60 Flatbed Member of the patina club**

Register or Log In To remove these advertisements.