aftermarket gauges install ????'s - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 12-08-2007, 09:57 AM

Quote:

Originally Posted by rodstored-72

i too am interested in knowing how to hook up elec. speedo???

There is a sending unit that screws into the side of the tranny where the speedo cable would hook.... then from there you run wires to the speedo... Its really nice for custom dash installs where you couldnt string a cable.. for our trucks your keeping the speedo in the same spot using the gauge cluster with AM gauges..

lyrikz · 12-08-2007, 10:41 AM

Quote:

Originally Posted by c10addict

There is a sending unit that screws into the side of the tranny where the speedo cable would hook.... then from there you run wires to the speedo... Its really nice for custom dash installs where you couldnt string a cable.. for our trucks your keeping the speedo in the same spot using the gauge cluster with AM gauges..

Quick question. Say you have 5 guages in your dash, 5 power wires, do you run one power wire to one guage then run the other 4 guages off that same power wire??? Or do you have 5 seperate power wires coming from 12 volt to each guage????

c10addict · 12-08-2007, 11:12 AM

I ran all gauge power and grounds to one common power wire and 1 common ground wire.. I went a little thicker on the one I attached them all to.. Same with the light bulb wiring..

rodstored-72 · 12-08-2007, 02:31 PM

C10ADDICT,
that was the imression that i got too as long as you go with a thicker ga. wire to connect them to. i think that for this truck i will stay with a mech. speedo. though.

12-08-2007, 11:12 AM	#28
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: aftermarket gauges install ????'s I ran all gauge power and grounds to one common power wire and 1 common ground wire.. I went a little thicker on the one I attached them all to.. Same with the light bulb wiring.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 12-08-2007 at 02:41 PM.

12-08-2007, 02:31 PM	#29
rodstored-72 chevy truck fan Join Date: Mar 2005 Location: Gilbert, arizona 85298 Posts: 2,009	Re: aftermarket gauges install ????'s C10ADDICT, that was the imression that i got too as long as you go with a thicker ga. wire to connect them to. i think that for this truck i will stay with a mech. speedo. though.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.