Pics of all 327 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kombreeze · 12-08-2007, 01:41 PM

I'm looking for pics of all 327 trucks. Engine bays and full body pics. Still tmany hotrodders favorite small block next to the 350. Anyhow if I can also get wich of the heads to run or power combinations should be ran. Building the truck up now but the motor is running good not great but good to get down the road. So looking for future ideas and syling for my future rat rod 68 stepside.......(flat color/with pinstriping/whitewalls) near future.

so lets see those 327

cstm68 · 12-08-2007, 01:56 PM

theres lots of my 327 in m build thread. ill try to post some here on when i get on my other computer

tech1 · 12-08-2007, 04:01 PM

Here is my 327 during the resto

streetstar · 12-08-2007, 07:27 PM

There's a guy on here with a burgundy LWB 67 or 68 GMC with a 327 and i think a tunnel ram setup --- anyone have a pic of that truck in their archives?

67cst · 12-09-2007, 12:47 AM

here is my 67 chevy with a 327(365hp)

mcc-bri · 12-09-2007, 01:09 AM

My 327 is a 65 with matching camel hump heads. Im putting a duntov 30/30 cam in it, decking the heads and rebuilding it from the bottom end up. When i got the engine it came with a holley street dominator intake, moroso deep oil pan with oil pump to go with it, noisey gear drive and it also had some sort of special harmonic balancer. I am hoping to see around 350 hp out of this engine when it is done.

here is a pic in a terible baby blue metalic paint with the heads painted an alumin color.

jugernot · 12-09-2007, 03:22 AM

My 327 Engine
327 Large Journal Block .40 over
Steal Crank
TRW forged pistons 9.96 comp ratio
Speed Pro Moly rings
Michigan 77 rod and main bearing
Edelbrock Proformer RPM cam and intake
Edelbrock 600 cfm carb
Pete Jackson noise gear drive
World Torquer Heads
Manley Swirl polishied 2.02/1.60 valves
67cc combustion chamber
Comp Cam roller tip rockers and lifters
350 turbo street/street transmission

Longhorn Man · 12-09-2007, 08:29 PM

just look at any small block for ideas, they all look the same

kombreeze · 12-10-2007, 02:22 AM

not really, out accesories are ran differently especially those that don't have bolt holes in the heads for accesories. That was my main concern.

Longhorn Man · 12-10-2007, 04:37 PM

I'm sorry, you are absolutly right. I was thinking more along the lines of engine color and chrome/polish/etc.
I rarely even give the brackets a second glance. I look and notice if they are the correct style, the later style or a serp set up, then I look past them and hardly even notice them.
Here's a bump for you.

12-08-2007, 01:41 PM	#1
kombreeze Registered User Join Date: Jul 2006 Location: Fresno, Ca Posts: 154	Pics of all 327 trucks I'm looking for pics of all 327 trucks. Engine bays and full body pics. Still tmany hotrodders favorite small block next to the 350. Anyhow if I can also get wich of the heads to run or power combinations should be ran. Building the truck up now but the motor is running good not great but good to get down the road. So looking for future ideas and syling for my future rat rod 68 stepside.......(flat color/with pinstriping/whitewalls) near future. so lets see those 327 __________________ 68 chevy truck 70 Datsun 510 2000 Nissan Sentra 2006 Toyo Camry Soon 69 Firebird 400 Convertible I'm getting it back Soon Trailblazer or 4 Runner

12-08-2007, 01:56 PM	#2
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: Pics of all 327 trucks theres lots of my 327 in m build thread. ill try to post some here on when i get on my other computer __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB

12-08-2007, 04:01 PM	#3
tech1 Registered User Join Date: Mar 2000 Location: Orange Ma. USA Posts: 202	Re: Pics of all 327 trucks Here is my 327 during the resto Attached Images __________________ 1970 C10 Step-side (Northeast Top 100 Winner) 1986 MonteCarlo SS Y2K Ford F-150 SC 5.4 Off-road 3.73ls

12-08-2007, 07:27 PM	#4
streetstar Registered User Join Date: May 2007 Location: Moore, Oklahoma Posts: 2,396	Re: Pics of all 327 trucks There's a guy on here with a burgundy LWB 67 or 68 GMC with a 327 and i think a tunnel ram setup --- anyone have a pic of that truck in their archives?

12-09-2007, 12:47 AM	#5
67cst i love summertime Join Date: Jul 2002 Location: Kelowna BC Posts: 4,302	Re: Pics of all 327 trucks here is my 67 chevy with a 327(365hp) Attached Images __________________ 1967 shortbox stepside Chevy, 365 hp 327, th400. GLOVE BOX LIGHTS FORSALE, click link for info http://67-72chevytrucks.com/vboard/s...d.php?t=273724

12-09-2007, 01:09 AM	#6
mcc-bri Registered User Join Date: May 2007 Location: Winnipeg, Manitoba Posts: 186	Re: Pics of all 327 trucks My 327 is a 65 with matching camel hump heads. Im putting a duntov 30/30 cam in it, decking the heads and rebuilding it from the bottom end up. When i got the engine it came with a holley street dominator intake, moroso deep oil pan with oil pump to go with it, noisey gear drive and it also had some sort of special harmonic balancer. I am hoping to see around 350 hp out of this engine when it is done. here is a pic in a terible baby blue metalic paint with the heads painted an alumin color. Attached Images Last edited by mcc-bri; 12-09-2007 at 01:21 AM.

12-09-2007, 03:22 AM	#7
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Pics of all 327 trucks My 327 Engine 327 Large Journal Block .40 over Steal Crank TRW forged pistons 9.96 comp ratio Speed Pro Moly rings Michigan 77 rod and main bearing Edelbrock Proformer RPM cam and intake Edelbrock 600 cfm carb Pete Jackson noise gear drive World Torquer Heads Manley Swirl polishied 2.02/1.60 valves 67cc combustion chamber Comp Cam roller tip rockers and lifters 350 turbo street/street transmission Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

12-09-2007, 08:29 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Pics of all 327 trucks just look at any small block for ideas, they all look the same

12-10-2007, 02:22 AM	#9
kombreeze Registered User Join Date: Jul 2006 Location: Fresno, Ca Posts: 154	Re: Pics of all 327 trucks not really, out accesories are ran differently especially those that don't have bolt holes in the heads for accesories. That was my main concern. __________________ 68 chevy truck 70 Datsun 510 2000 Nissan Sentra 2006 Toyo Camry Soon 69 Firebird 400 Convertible I'm getting it back Soon Trailblazer or 4 Runner

12-10-2007, 04:37 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Pics of all 327 trucks I'm sorry, you are absolutly right. I was thinking more along the lines of engine color and chrome/polish/etc. I rarely even give the brackets a second glance. I look and notice if they are the correct style, the later style or a serp set up, then I look past them and hardly even notice them. Here's a bump for you.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.