wheels? input requested..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud_grip · 12-13-2007, 04:52 PM

i am needing some input....

i just finished my project this summer and wanted to know what ya'll thought about the wheels. should i spend some money on newer ones, or just pretty up the ones i have now? if i do get some new ones, where could i get some that fit (it is factory 6 lug all around)?

69C10@16 · 12-13-2007, 05:02 PM

i say stick some old school cragars or something similar on it. the Cragar Series 616C would fit the 6 lug but i must admit the 5 lug Series 61 look a lot better.

*screamin_eagle* · 12-13-2007, 05:09 PM

those are some sweet wagons just throw on some beauty rings and you'll be set.

72BLUZ · 12-13-2007, 06:21 PM

Beauty Rings Would Inhance The Look, But Aluminum Would Look Better.
But You Know What They Say About Opionions!!!!

chev74 · 12-13-2007, 06:39 PM

i like those personally...

but Cragars DO look sweet... never seen 6 lug Cragars though

Spray-Bomb · 12-13-2007, 06:43 PM

I like a lot of different wheels, but I think that the wagon wheels fit the personality of your truck

But if you do change em, keep it old skool !!!

Dingfodgy · 12-13-2007, 06:55 PM

It all depends on your particular tastes. Personally, I'd drop the rear about 2 inches and toss on some 8" or 10" rally's with rings and caps w/ matched tires. That would still keep the rig looking stock, but a bit blinged up IYKWIM.

Old school smoothies or gennie's with SS police caps would look good too. So would some vintage Aluminum ET's.

c10addict · 12-14-2007, 03:29 AM

Quote:

Originally Posted by Dingfodgy

It all depends on your particular tastes. Personally, I'd drop the rear about 2 inches and toss on some 8" or 10" rally's with rings and caps w/ matched tires. That would still keep the rig looking stock, but a bit blinged up IYKWIM.

Old school smoothies or gennie's with SS police caps would look good too. So would some vintage Aluminum ET's.

72BlckButy · 12-14-2007, 03:57 AM

Rallys would look sweet! As would lowering the truck a little.

HeavyD · 12-14-2007, 06:20 AM

6 lug slots. There have been a few sets for sale on the board for cheap, and they look better than wagon wheels IMO.

OrangeCrush1970 · 12-14-2007, 10:12 AM

Quote:

Originally Posted by Dingfodgy

It all depends on your particular tastes. Personally, I'd drop the rear about 2 inches and toss on some 8" or 10" rally's with rings and caps w/ matched tires. That would still keep the rig looking stock, but a bit blinged up IYKWIM.

Old school smoothies or gennie's with SS police caps would look good too. So would some vintage Aluminum ET's.

10" rally's w/ beauty rings and 275/70r15 BF Goodrich white letter T/A's will look real nice

*Billla* · 12-14-2007, 10:17 AM

It's definitely a personal taste thing - as well as how you use the truck. Nice aluminum wheels if you've gotta drive every day on gravel isn't going to do any good

I personally don't like the white spoke wheels - I just think they look kinda cheap. I really like factory ralleys and the American Racing Torque Thrust D's.

Jcentsr6 · 12-14-2007, 02:04 PM

I have a set for sale...

12-13-2007, 04:52 PM	#1
mud_grip Registered User Join Date: Dec 2007 Location: Duncan, Oklahoma Posts: 17	wheels? input requested..... i am needing some input.... i just finished my project this summer and wanted to know what ya'll thought about the wheels. should i spend some money on newer ones, or just pretty up the ones i have now? if i do get some new ones, where could i get some that fit (it is factory 6 lug all around)? Attached Images

12-13-2007, 05:02 PM	#2
69C10@16 Registered User Join Date: Aug 2007 Location: Greenfield, MO Posts: 215	Re: wheels? input requested..... i say stick some old school cragars or something similar on it. the Cragar Series 616C would fit the 6 lug but i must admit the 5 lug Series 61 look a lot better.

12-13-2007, 05:09 PM	#3
screamin_eagle Account Suspended Join Date: Dec 2005 Posts: 114	Re: wheels? input requested..... those are some sweet wagons just throw on some beauty rings and you'll be set.

12-13-2007, 06:21 PM	#4
72BLUZ Registered User Join Date: Nov 2006 Location: lafayette, ga. Posts: 832	Re: wheels? input requested..... Beauty Rings Would Inhance The Look, But Aluminum Would Look Better. But You Know What They Say About Opionions!!!! __________________ Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same.... Ronald Reagan

12-13-2007, 06:39 PM	#5
chev74 Addicted to Chevy Join Date: Dec 2004 Location: Tyler, Tx Posts: 857	Re: wheels? input requested..... i like those personally... but Cragars DO look sweet... never seen 6 lug Cragars though

12-13-2007, 06:43 PM	#6
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: wheels? input requested..... I like a lot of different wheels, but I think that the wagon wheels fit the personality of your truck But if you do change em, keep it old skool !!! __________________ Just not low enough... ----------------------------- Sinister Killer

12-13-2007, 06:55 PM	#7
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: wheels? input requested..... It all depends on your particular tastes. Personally, I'd drop the rear about 2 inches and toss on some 8" or 10" rally's with rings and caps w/ matched tires. That would still keep the rig looking stock, but a bit blinged up IYKWIM. Old school smoothies or gennie's with SS police caps would look good too. So would some vintage Aluminum ET's. __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

12-14-2007, 03:57 AM	#9
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: wheels? input requested..... Rallys would look sweet! As would lowering the truck a little. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 12-14-2007 at 03:57 AM.

12-14-2007, 06:20 AM	#10
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: wheels? input requested..... 6 lug slots. There have been a few sets for sale on the board for cheap, and they look better than wagon wheels IMO. __________________ "You can take the man out of PA, but you can't take PA out of the man"

12-14-2007, 10:17 AM	#12
Billla Account Suspended Join Date: Sep 2005 Location: Monroe, WA Posts: 3,814	Re: wheels? input requested..... It's definitely a personal taste thing - as well as how you use the truck. Nice aluminum wheels if you've gotta drive every day on gravel isn't going to do any good I personally don't like the white spoke wheels - I just think they look kinda cheap. I really like factory ralleys and the American Racing Torque Thrust D's.

12-14-2007, 02:04 PM	#13
Jcentsr6 Junior Member Join Date: Jul 2007 Location: Odenton, Md Posts: 552	Re: wheels? input requested..... I have a set for sale... Attached Images __________________ going to sell this one...looking for a SWB project next.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.