![]() |
![]() |
#1 |
screamin eagle
Join Date: Oct 2007
Location: westbury ny
Posts: 237
|
edelbrock 1904
I have a 72 pickup with a 350-headers,hei,performer manifold,and a 1904which has been giving me a few problems.What would be a good mechanical secondary carb to replace it with.I feel the vacuum secondaries don't give enough kick off the line
__________________
SCREAMIN EAGLE |
![]() |
![]() |
![]() |
#2 |
Retired Air Force Veteran
![]() Join Date: Aug 2007
Location: Pembroke Pines, Florida 33024
Posts: 1,808
|
Re: edelbrock 1904
I'm using a Holley 670 Street Avenger with a Edelbrock Performer and 1" spacer
__________________
Harry 69' SWB Step Side 1/2 Ton w/68' Front Clip Swap from Leafs to Trailing Arms (Complete) Swap 6 Lug to 5 Lug (w/ Disk Brakes in Front) 3/6 Drop ![]() Help Support The Board Click Here For Information On How To Subscribe Krue's FAQ Page Vendors |
![]() |
![]() |
![]() |
#3 |
It's the air up here
Join Date: Mar 2007
Location: Western Colorado
Posts: 710
|
Re: edelbrock 1904
Edelbrock's 1406 should do the job nicely.
__________________
1971 cheyenne k10 4 speed np 205 454 BB factory a/c ![]() Never drink down stream of the herd! Eric |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Oct 2007
Location: Fairfield, PA
Posts: 503
|
Re: edelbrock 1904
I have a 1406 (600 cfm/electric choke) and was too small for my Big Block. I went to the 1411 (750 cfm) which is much better...Anyways...if you are in for a trade I might be interested in your 1904 Quadrajet. I assume it has electric choke?
Let me know if you are interested. Alan |
![]() |
![]() |
![]() |
Bookmarks |
|
|