door handles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 12-25-2007, 02:16 PM

anyone use these door handles from billit specialties?

http://www.billetspecialties.com/ite...scid=9&pid=934

wondering if they work better than the cheap ones on ebay?

extd56 · 12-25-2007, 03:02 PM

I used them in my 38 chrysler, worked out great. They fit great and much better than the ones I bought that were cheaper but ended up giving away.

76bonanza · 12-25-2007, 03:16 PM

Can you explain kind of how they attach? Mainly how the handle attaches do the spline?

**Tim Christian** · 12-25-2007, 03:21 PM

I have some on my truck made by Billet Sepcialties and they are GREAT!

**FRENCHBLUE72** · 12-25-2007, 03:37 PM

They sure are pretty for the price..

Andy4639 · 12-25-2007, 04:18 PM

Haven't used those but I have these installed and they work fine. They have a splined ring that has three set screws in it then put handle over it and screw it into the ring to hold it. I bought them years ago at Charlotte and don't remeber tha' name brand of them though.

Here is the website that has them.
http://www.bigalscarponents.com/page25.html

12-25-2007, 02:16 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	door handles anyone use these door handles from billit specialties? http://www.billetspecialties.com/ite...scid=9&pid=934 wondering if they work better than the cheap ones on ebay? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

12-25-2007, 03:02 PM	#2
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: door handles I used them in my 38 chrysler, worked out great. They fit great and much better than the ones I bought that were cheaper but ended up giving away.

12-25-2007, 03:16 PM	#3
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: door handles Can you explain kind of how they attach? Mainly how the handle attaches do the spline? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

12-25-2007, 03:21 PM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: door handles I have some on my truck made by Billet Sepcialties and they are GREAT!

12-25-2007, 03:37 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: door handles They sure are pretty for the price.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-25-2007, 04:18 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: door handles Haven't used those but I have these installed and they work fine. They have a splined ring that has three set screws in it then put handle over it and screw it into the ring to hold it. I bought them years ago at Charlotte and don't remeber tha' name brand of them though. Here is the website that has them. http://www.bigalscarponents.com/page25.html __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 12-25-2007 at 04:30 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.