Wanted new or gently used flowmasters prefer 3 inch in / out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 11-22-2007, 03:03 PM

also want big block intake for oval port prefer team g or victor junior
while I am dreaming looking for a alum long water pump and pulley set
a lakewood blow proof bell housing for chevy
set of 35 inch or bigger swamper boggers with or without wheels thanks Mike

f.monroe · 01-01-2008, 07:11 PM

Still looking for 3 inch flows. I have a pair . One was installed and one has never been installed . They are 3 inch 3 chamber offset/center i think . If so let me know . $100 plus shipping . Frank

**jerry moss** · 01-02-2008, 07:30 AM

FYI-flowmasters are all the same on the inside, the only difference is the inlet/outlet diameters. i work in a muffler shop and we only carry 2 1/4 in/out and swell them to fit whatever pipe size we are working with--they will swell to 3 inch with no problem.
by the way, 100 bucks for a pair is a great deal.

f.monroe · 01-02-2008, 02:40 PM

Thanks for the info . I actually want a set of the same mufflers in 2.5inch instaed of three inch . I need to talk to the exhaust guy and see if it is a problem for him to run 2.5inch pipe with these 3inch mufflers . If so , I might just use them . Frank

11-22-2007, 03:03 PM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Wanted new or gently used flowmasters prefer 3 inch in / out also want big block intake for oval port prefer team g or victor junior while I am dreaming looking for a alum long water pump and pulley set a lakewood blow proof bell housing for chevy set of 35 inch or bigger swamper boggers with or without wheels thanks Mike __________________ hav'n fun be'n me

01-01-2008, 07:11 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wanted new or gently used flowmasters prefer 3 inch in / out Still looking for 3 inch flows. I have a pair . One was installed and one has never been installed . They are 3 inch 3 chamber offset/center i think . If so let me know . $100 plus shipping . Frank __________________ Born and proudly residing in a Red State !

01-02-2008, 07:30 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,861	Re: Wanted new or gently used flowmasters prefer 3 inch in / out FYI-flowmasters are all the same on the inside, the only difference is the inlet/outlet diameters. i work in a muffler shop and we only carry 2 1/4 in/out and swell them to fit whatever pipe size we are working with--they will swell to 3 inch with no problem. by the way, 100 bucks for a pair is a great deal. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-02-2008, 02:40 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wanted new or gently used flowmasters prefer 3 inch in / out Thanks for the info . I actually want a set of the same mufflers in 2.5inch instaed of three inch . I need to talk to the exhaust guy and see if it is a problem for him to run 2.5inch pipe with these 3inch mufflers . If so , I might just use them . Frank __________________ Born and proudly residing in a Red State !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.