67 Glove box emblem ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jc · 12-20-2007, 10:04 AM

can any one tell me how the chevrolet glove box emblem is suposed to mount to the glove box.

do clips slide over the pins on the emblem before you push the pins in the holes.?

or is it just glued on?? useing the pins to align it.

i dont see any residue of glue on my glove box where the emblem was nor do i have the old emblem

i do have a new emblem ready to mount though.

jb4short · 12-20-2007, 10:35 AM

jc - if it's the old post style cast emblem with holes in the box then there is supposed to be inserts that go in the holes first....then you push the emblem into inserts. Don't try to push the emblem and inserts into the hole at the same time. I'll see if I can find a picture of those old inserts

jb4short · 12-20-2007, 10:58 AM

John,

The fasteners should be similar to this:

jc · 12-20-2007, 12:16 PM

jon
the emblem is plastic

i assumed it took clips like what you have picktured.

i have some from exterior emblems but they are to large or to small.

c10addict · 12-20-2007, 12:17 PM

I was missing the clips and just used very thin 3m double sided tape..

jc · 12-20-2007, 12:23 PM

here is a pic of the type of emblem i am talking about .
(i stole this pic from Burnsman, thanks burnsman)

c10addict · 12-20-2007, 12:30 PM

Thats the same one I have... 3M it.. it works great... Just get the thin stuff so there is no gap.

toms68cst · 12-20-2007, 01:04 PM

I tried the inserts shown and they did not work very well. As mentioned, My 3M D.S. tape has held up for several years.

jc · 12-20-2007, 01:42 PM

i have the textured glove box and dont wanna use the tape if i dont have.

i just have a hard time accepting that is how it was done at the factory.

but than again maybe thats why so many are missing.

sierragrande71 · 12-20-2007, 05:11 PM

I have a question? Where can you find the textured paint for the glovebox? Also the that I have is outlined with silver paint, what shade could I use to replicate this?

jb4short · 12-21-2007, 02:07 AM

Quote:

Originally Posted by jc

jon
the emblem is plastic

i assumed it took clips like what you have picktured.

i have some from exterior emblems but they are to large or to small.

John, there's about 8 sizes on the inserts. There are fastener specialists (like J&T in Syracuse) that carry all of them as well as molding clips, c-clips, nutserts etc. Their catalog is invaluable when you go to put stuff back together.

jc · 01-05-2008, 09:35 AM

thanks jon,

i just ordered some
they only come in a box of 100. ouch$$
from oem hardware.com

so if they work ill have a few extras.

ill let ya know next week if they work.
they should , i measured everything as acuratly as possible to get the right ones.

12-20-2007, 10:04 AM	#1
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	67 Glove box emblem ??? can any one tell me how the chevrolet glove box emblem is suposed to mount to the glove box. do clips slide over the pins on the emblem before you push the pins in the holes.? or is it just glued on?? useing the pins to align it. i dont see any residue of glue on my glove box where the emblem was nor do i have the old emblem i do have a new emblem ready to mount though. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

12-20-2007, 10:35 AM	#2
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 67 Glove box emblem ??? jc - if it's the old post style cast emblem with holes in the box then there is supposed to be inserts that go in the holes first....then you push the emblem into inserts. Don't try to push the emblem and inserts into the hole at the same time. I'll see if I can find a picture of those old inserts Last edited by jb4short; 12-20-2007 at 10:36 AM.

12-20-2007, 10:58 AM	#3
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 67 Glove box emblem ??? John, The fasteners should be similar to this:

12-20-2007, 12:16 PM	#4
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: 67 Glove box emblem ??? jon the emblem is plastic i assumed it took clips like what you have picktured. i have some from exterior emblems but they are to large or to small. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

12-20-2007, 12:17 PM	#5
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 67 Glove box emblem ??? I was missing the clips and just used very thin 3m double sided tape.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

12-20-2007, 12:23 PM	#6
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: 67 Glove box emblem ??? here is a pic of the type of emblem i am talking about . (i stole this pic from Burnsman, thanks burnsman) __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

12-20-2007, 12:30 PM	#7
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: 67 Glove box emblem ??? Thats the same one I have... 3M it.. it works great... Just get the thin stuff so there is no gap. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

12-20-2007, 01:04 PM	#8
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,284	Re: 67 Glove box emblem ??? I tried the inserts shown and they did not work very well. As mentioned, My 3M D.S. tape has held up for several years. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

12-20-2007, 01:42 PM	#9
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: 67 Glove box emblem ??? i have the textured glove box and dont wanna use the tape if i dont have. i just have a hard time accepting that is how it was done at the factory. but than again maybe thats why so many are missing. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER)

12-20-2007, 05:11 PM	#10
sierragrande71 Registered User Join Date: Jan 2007 Location: Orland, CA Posts: 721	Re: 67 Glove box emblem ??? I have a question? Where can you find the textured paint for the glovebox? Also the that I have is outlined with silver paint, what shade could I use to replicate this?

01-05-2008, 09:35 AM	#12
jc Registered User Join Date: Jan 2001 Location: Jackson, New Jersey Posts: 1,560	Re: 67 Glove box emblem ??? thanks jon, i just ordered some they only come in a box of 100. ouch$$ from oem hardware.com so if they work ill have a few extras. ill let ya know next week if they work. they should , i measured everything as acuratly as possible to get the right ones. __________________ 2004 Silverado 2500HD Crewcab 4x4 2000 TOYOTA 4RUNNER 1971 CHEYENNE LWB (THE LOVE SHACK) 1967 c-10 lwb (THE FARMERS DAUGHTER) Last edited by jc; 01-05-2008 at 09:36 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.