I having problems.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed70 · 01-07-2008, 01:00 PM

This is the third time Ive had this particular motor in and out of this truck....now all of a sudden Im having troubles getting the tiny motor mount holes to line up to get the bolts in.

So Im thinking, since Im also working with a big ass washer. That I could just ream the bolt holes on the frame stands a bit to make everything line up. Im only off an 1/8" or so.

Just wondering if that would hurt anything?

**truckdude239** · 01-07-2008, 01:08 PM

i wouldn't do it if they lined up before then i would find out why they aren't lining up now

Wrenchbender Ret · 01-07-2008, 01:45 PM

I hog them out every one I do. You can waist ungodly amount of time & temper trying to get them in. This stuff is just not that precise they will line up every time.

**john** · 01-07-2008, 02:46 PM

I just loosen the stands , then tighten after all the bolts are in. The next time they should be lined up.

Slammed70 · 01-07-2008, 02:52 PM

K.

01-07-2008, 01:08 PM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,236	Re: I having problems.... i wouldn't do it if they lined up before then i would find out why they aren't lining up now __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

01-07-2008, 01:45 PM	#3
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,226	Re: I having problems.... I hog them out every one I do. You can waist ungodly amount of time & temper trying to get them in. This stuff is just not that precise they will line up every time.

01-07-2008, 02:46 PM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: I having problems.... I just loosen the stands , then tighten after all the bolts are in. The next time they should be lined up. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.